Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹25.5 L
Closing Date
24 Aug 2026, 10:30 pm
Karnataka Power Corporation Limited
Obedulla Shariff
08024413630
9686520865
Design, Manufacture, Supply, Quality Surveillance, Testing at suppliers works, Transportation, Unloading to site, Delivery on FOR destination basis, arranging transit insurance, providing guarantees, erection, testing & commissioning at site of four numbers of 27MVA, 11/110kV, ONAN, 3-Phase Generator Transformers for four Units of 2nd Stage at Mahatma Gandhi Hydro Electric Station including dismantling of existing three nos. of 7.5MVA, 11/110KV single phase Generator Transformers installed at each Unit and shifting it to Stores at Jog.
KPCL/2026-27/PS/WORK_INDENT4507
KPCL/2026-27/PS/WORK_INDENT4507
Open
Power stations
Two Tender Document System(Two Cover)
KPCL Chief Engineer ED office Bengaluru
15 documents required · 11 mandatory · 4 optional
The bidder shall have satisfactorily completed the work of Design, manufacture, supply of minimum 1 no. of 20 MVA, 11/110KV, 3 phase Generator Transformer or higher capacity Generator Transformer to State/Central Generating Utilities or any organization in India directly or through EPC Contractor & the same shall have satisfactorily performed for a minimum period of one year during the preceding five years (One-year satisfactory performance period should have been completed as on the date of tender notification).As a proof of this, Bidder shall furnish copy of performance certificate and corresponding work order having value not less than Rs.12.5Crores issued by an officer of the rank of Chief Engineer or Station Superintendent / Competent Authority of the Power Generating Station/Sub-station.In case the corresponding work order value is less than 12.5Crs, then the bidder shall furnish copy of single work order for having supplied 110kV or higher-class Generator Transformers or Power Transformers having value of 12.5Crs or more, in order to prove the techno-commercial capability, in addition to (i) above.
The bidder shall be a regular manufacturer of transformers of 110KV or above class in India.
The bidder should have achieved in at least two financial years a minimum financial turnover of Rs.5098 Lakhs during the last five years period i.e., 2021-22 to 2025-26
The intending bidder shall not have been subjected to forfeiture of EMD/foreclosure/termination of their Contract in KPCL or Government or any other utility or shall not have been blacklisted for participating in tender by KPCL, Government, or any other utility in India during the past three years
The intending bidder shall hold a valid Super Grade Electrical Contractors License issued by Government of Karnataka and shall have carried out erection, testing & commissioning of at least 1 no. of 20MVA 11/110kV or above Transformer in India during the preceding five years from date of tender opening.As a proof of this, bidder shall furnish a valid Super Grade Electrical Contractors license and work done certificate issued by an officer of the rank of Chief Engineer or Station Superintendent / Competent Authority of the Power Station/Sub-station along with copy of corresponding work order/s.ORIf the intending bidder doesnt hold valid Super Grade Electrical Contractors License issued by Government of Karnataka, he shall give an undertaking that under bidders supervision, the dismantling, civil foundation works, erection, testing & commissioning activity of GTs will be executed at site by a Sub-contractor having following:Past experience of works carried out for erection, testing & commissioning of at least 1 no. of 20MVA 11/110kV or above Transformer in India during the preceding five years from date of tender opening and Valid Super grade Electrical contractor License issued by the Government of Karnataka.
Type test certificate for Dynamic Short Circuit Test of the same or higher rating Transformer with similar design from a NABL accredited laboratory like CPRI. It shall be within ten years period from the date of issue of NIT.If the bidder does not have requisite test report, he shall demonstrate the Transformers ability to withstand the dynamic effects of short circuit through KPCL approved third party Agency by vetting of design considerations & calculations.
₹7,500
₹25.5 L
24 Jul 2026
24 Jul 2026
27 Aug 2026
31 Jul 2026
3 Aug 2026
No. of windings
i) HV winding
ii) LV winding
i) HV winding
ii) LV winding
i) HV winding(ohms/ph)
ii) LV winding(ohms/ph)
a) LV & core
b) HV & yoke
i) HV winding (KVP)
ii) LV Winding (KVP)
i) HV winding (KVP)
ii) LV Winding (KVP)
xviii]
i) HV Winding (KV rms)
ii) LV Winding (KV rms)
iii) Neutral end of HV (KV rms)
i) HV Winding
ii) LV Winding
RADIATORS
i) Lowest tap
ii) Highest tap
iii) Normal tap
Cable box (LV side)
i) Underbase to topmost point
ii) Overall breadth
iii) Overall length
Overall transporting dimensions of largest package (LxBxH)
Details of taps provided for installation of Nitrogen type fire injection system:
Whether transformer is suitable for installation in the place of existing transformers (Yes/No)
SIGNATURE OF THE BIDDER WITH SEAL
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
SEC3.doc
Tender Document • 0.20 MB
SEC4.doc
Tender Document • 0.42 MB
SEC5.doc
Tender Document • 0.20 MB
NIT.doc
Tender Document • 0.15 MB
SEC2.doc
Tender Document • 0.14 MB
ITB.doc
Instructions to Tenderers • 0.33 MB
GTP.xls
Tender Document • 0.07 MB
SEC1.doc
Tender Document • 0.29 MB
SCHEDULES.doc
Tender Document • 0.11 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].