SPECIAL REPAIR TO BLDG NO P-23 AT MCEME UNDER GE MCEME SECUNDERABAD

Amount

Demolition of old and unserviceable cement concrete in roofs / floors other than ground floor of any desctription and position complete all as specified and directed.

M&L 25mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in padding concrete (levelling course) on roof complete all as specified and as directed by Engr-in-Charge.

M&L Rendering 10 mm thick in CM (1:3) using water proofing compound as per manufacturer instructions as in roof padding and chajjas complete all as specified and directed. Note : Water proofing compound will be measured and paid separately.

M&L for APP modified prefabricated five layer water proofing membrane minimum 3mm thick and weighing not less than 3.6 kg/Sqm, reinforced with non woven polystester matt black finished (wt not less than 150 gms/Sqm) over combatible primer at 0.40 Ltr/Sqm and torch applications of membrane with minimum 10cm side over lap and 15cm end laps and applying solar reflective bituminous aluminium paint @ 0.10 kg / sqm complete all as specified and as directed by Engineer-in-Charge.

Supply only integral water proofing compound complete all as specified and directed.

Demolition of old and unservicable Brick work or stone boulder masonry, built in cement mortor or cement lime mortar complete all as specified and directed.

Dismantling of single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.

Dismantling of timber scantlings 40 Sqcm and over in section as in framed work in any position complete all as specified and directed.

Dismantling battens for tiles spacing exc 15 cm complete all as specified and directed.

M&L for 2nd class hard wood timber scantlings clean sawn in framed work and fixed with nails complete all as specified and directed.

M&L Preparing surfaces of wood and wood based materials , new or old of any description and girth not otherwise described and treated with creosote complete all as specified and directed.

M&L Mild Steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe 410 -W (Gde E- 250) quality A complete all as specified and directed.

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

M&L for providing, cement concrete Type B-0 1:2:4 (12.5mm graded graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide including preparation of new or previously untreated steel surfaces over 10cm in width or girth, not otherwise described in any pattern complete all as specified and directed.

M&L Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Anti-skid / Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of cement mortar in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L glazed ceramic coloured tiles 450x 300x 6 to 7mm thick on vertical surfaces such as dados, wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces complete all as specified and directed.

M&L Rendering 10 mm thick in CM (1:4) finished rough to receive wall tiles complete all as specified and directed.

M&L for brickwork with fly ash modular bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down plastering in cement mortar on brick or stone wall/ ceilings etc including racking out joints hacking for key scrubbing down with water etc.complete all as specified and directed.

M&L for rendering 10mm thick cement plaster 1:6, incl finishing surface even and smooth without using with out extra cement on internal faces complete all as specified and directed.

M&L for rendering 15mm thick cement plaster 1:4 in two layers incl finishing even and fair without using extra cement on external surfaces including water proofing (water proofing compound taken separately) complete all as specified and directed.

M&L for cement plaster 5 mm thick in cement mortar 1:3, incl finishing surfaces even and smooth without using extra cement on ceiling complete all as specified and directed.

M&L for applying two coats of OBD over two coat of wall care putty over a coat of alkali resistant primer including preparing the new plastered wall surfaces complete all as specified and directed.

M&L for complete removal of existing surfaces on walls and applying two coats of oil bound distemper over two coat of wall care putty over a coat of alkali resisitant primer complete all as specified and directed.

M&L for three coats of white wash to ceiling surfaces including preparation of new surfaces complete all as specified and directed.

M&L for preparation of old surface of ceilings and applying one coat of white wash complete all as specified and directed.

M&L for preparation of new surfaces of walls etc, and applying two coats of exterior weather proof paint over one coat of external primer complete all as directed by Enginneer-In-Charge.

M&L for complete removal of existing treatement including preparation of old decorated surfaces of wall and cornices and applying two coats of acrylic weather proof painting over one coat of wall care putty on wall to make surfaces smooth and good complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L Anodised aluminium snap grid of 605x605mm frame work for false ceiling including hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for 6 to 7 mm thick gypsum board panels 600x600mm with PVC laminated on one side and aluminium foil on another side suitably placed in false ceiling grid made of aluminium Gi/MS all as specified and as directed. Note : Aluminium grid will be measured and paid separately.

Demolition of old cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises complete all as specified and directed.

M&L for PCC (1:3:6) type C2 using 40 mm graded aggregate as in plinth protection/ Paths of average 75mm thick. Finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm each but n.exc. 4 sqm each complete all as specified and directed.

Taking down, Shutters of any description exc 1 but n exc 2 sq. m each, etc complete all as specified and directed.

M&L Solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per manufacturers instructions all as directed complete all as specified and directed.

Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and directed.

S&F Windows/ ventilators (NCL ECO – 4000 Series Windows (Double Rebate Windows) or equivalent) fabricated from roll framed sections made of galvanized steel colour coated/ powder coated (Base steel as per IS 513 “D” quality galvanized as per IS 277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm.Sections for Frame should be of 72mm x 55mm, Section for Mullion should be of 72mm x 50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12mm x 12mm, and Section for Fly Mesh should be of 40mm x 20mm Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter including SS Pivot Hinges – 1 set, Seccolor Handle & Seccolor Stay and 4MM Plain Float Glass and Stainless Steel 32 gauge Fly mesh of 25 holes per SqCM and powder coated Grill made of 10mm sq. MS Bars welded at 150mm c/c, 6mm x 12mm MS flat and fixed to window frame with screws complete all as specified and directed.MAKE: NCL or equivalent

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc of size 105 x 60 mm complete all as specified

S&F IInd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in filling in frame complete all as specifed and directed.

S&F mild steel flats 25x3 as in hold fasts complete all as specified and directed.

M&L for 35mm thick flush shutter,solid core construction with block board core and plywood face panels,commercials type on both sides complete all as specified and directeb by Engineer in Charge

M&L for two coats of synthetic enamel paint over a coat of primer including preparation of new wooden surface of any description over 10 cm width and girth complete all as specified and directed.

M&L for one coat of synthetic enamel paint including preparation of old wooden surface of any description over 10 cm width and girth complete all as specified and directed.

Dismantling timber scantling as in fillets, rails etc under 40 sqcm in section and fixed in any position complete all as specified and directed.

Dismantling boarding, cupboards shelves etc. any thickness and description , fixed with nails/screws complete all as specified and directed.

M&L 2nd class hard wood plain fillets sectional area exc 13 sqcm but n. exc 25 sqcm square(as in chowkats of CBs) , rectangular in section, wrought and smooth finish, secured with nails or brads complete incl polishing all as specified

M&L 2nd class hard wood fillets sectional area exc 6 sqcm but n. exc 13 sqcm square , rectangular in section, Wrought and smooth finish complete all as specified and directed.

M&L 2nd class hard wood fillets ( in beading of CBs shutter) sectional area n. exc 3 sqcm square , rectangular or triangular in section, Wrought and smooth finish but bullnosed, splayed chamfered or rounded on one edge or face complete all as specified and directed.

M&L for 25 mm thick prelaminated particle board exterior grade prelaminated both side with decorative choice lamination & other side balancing white laminations fixed with screws to timber formwork complete all as specified and directed.

S&F continuous (Piano ) Hinges 30 mm width of flaps, mild steel bright finish or elecrogalvanised complete all as specified and directed.

S&F 100mm aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 100 mm size Hasp and staple, Aluminium anodised, wire type, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F 100mm long MS butt hinges with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.

S&F 150mm size aluminium anodised handles, fabricated type complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F MS helical door spring 300 mm long with roller and roller plate complete all as specified and directed.

S&F anodised aluminum frame for doors, windows,ventilators/Partion with one or more rebates including joining cleat for fixing etc, including minimum 50 micron thickness of powder coating complete all as specified and directed.

S&F Anodised aluminum doors shutters,aluminum section weighing 0.55 kg/ m, including necessary joining cleats,glazing clips, rubber neoprene packing, handle 2 Nos in each Door, hinges anodised aluminum snap beading screws etc powder coating of any colour (thickness of powder coating minimum 50 micron ) complete all as specified and directed.

S&F door closer hydraulically regulated design No-02, universal , suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed Almunium (Extruded section body) complete all as specified and directed.

S&F Floor Door stopper of aluminum alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor over all length of cover plate 140 mm complete all as specified and directed.

S&F mortice lock mild steel, verticle type, size 100 mm with 4 leavers fixed with shutter and chowkats all as specified by Engr-in-charge.

M&L Sheet glass ordinary quality and glazing with rubber neoprene packing in square exc 0.5 sqm in each pane 5.5 mm thick glass or all as specified and directed by engineer in charge.

S&F Solar control film 25 microm reflectric type sticked to glass panes as per instruction of manufactors complete all as specified and directed.

Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified and directed.

M&L for 4 mm thick,Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, etc complete all as specified and directed.

S&F in repairs, vitreous china wash basin white flat back size 550x400mm with brackets including cutting for and pinning in ends of brackets or erecting stand including waste coupling CP brass 32mm dia with long screwed shanks & fly nuts & fancy type CP pillar tap complete all as specified and directed.

Taking up or down steel tubing & connections, 15 mm dia complete all as specified and directed.

Taking up or down steel tubing & connections, 20 mm dia complete all as specified and directed.

S&F 15mm dia. Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified and directed.

S&F 20mm dia. Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F in repairs, CP 15mm, stop valves/ angle cock, fancy type cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe complete all as specified and directed.

Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches, Bore of pipes in 40mm, complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

M&L 75mm thick PCC type D2, 1:4:8 (40mm graded aggregate) finished even complete all as specified and directed.

M&L for 20 mm thick screed bed or bedding layer of mortar in cement 1:6 for laying floor finishes complete all as specified and directed.

M&L chequered cement concrete tiles 30cm x30 cm x25mm thick , set jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in copings around the paver block for setting etc including weathering, slightly rounded or chamfered angles and throating and including necessary form work complete all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / Hylam sheet/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and directed.

Material and labour for point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked of suitable dia conduit wiring including Tee, Junction boxes and provision of modular terminal boxes and covered with modular cover plate with frame of suitable size including suitable screws with washer for mounting modular switch, modular sockets and modular regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly including cutting and chassing of wall whereever required complete all as specified & as directed for One light point controlled by one, one way switch 5 amps, SP complete all as specified and directed. Note:- 1. Cutting and chassing will be measured and paid seperately for the concealed wiring. 2. Wiring to be carried out in existing pipe in celing/roof in concealed wiring.

All as per item No. 90 above but for One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and directed.

All as per item No. 90 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and directed.

All as per item No. 90 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and directed.

All as per item No. 90 above but using 2.5 Sqmm single core copper conductor cable multistranded PVC insulated unsheathed 1100 volts grade for 3 pin 15 Amps switch socket combination point including running 2.5 Sqmm copper conductor PVC wire as earth continuity conductor on independant board.

Supply and fixing of Modular Switch , 1 module, 6 Amps capacity 230 volts complete all as specified and directed.

Supply and fixing of Modular Switch , 1 module, 16 Amps capacity 230 volts complete all as specified and directed.

Supply and fixing of Modular socket outlet 6 Amps 2 /3 pin 2 module complete all as specified and directed.

Supply and fixing of Modular socket outlet 6/16 Amps 2 /3 pin 2 module complete all as specified and directed.

Supply and fixing of Modular electronic ceiling fan regulator stepped type suitable to work on 230 volts complete all as specified and directed.

Supply and fixing of ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and directed.

Material and labour for Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not less than 25 mm dia including one run of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including cutting and chassing of wall wherever required & removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified and as directed. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured as one unit length. Note:- Cutting and chasing will be measured and paid seperately.

Material and labour for Submain wiring with 2 runs of single core 10 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not less than 25 mm dia including one run of single core 10 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including cutting and chassing of wall wherever required & removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified and as directed. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured as one unit length. Note:- Cutting and chasing will be measured and paid seperately.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of andings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth Note: This item will be measured for making concealed wiring for 4 Nos office rooms.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed .

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

Supply and fix LED energy efficient building security light fitting of capacity of 35 W for fixing in GI pipe bracket on wall all as specified and directed. NOTE : GI bracket, clamp, nut and bolt etc will be measured in separate item.

Supply and fixing ultra modern recess mounted 36W LED luminaire suitable for armstrong grid /POP ceiling of 2'x2' and complete including electronic driver including taking down old light fitting all as specified and directed.

Supply & fixing galvanised iron tube bracket of 40 mm dia light grade and 1.2 mtr length for fixing building security light, with all fixing arrangement including necesssary clamp, nut and bolt etc. as required size all as specified and as directed

Supply and fix sheet metal enclosure with double pole and Earth Metal Plug & Socket including 20A SP MCB complete including taking down unserviceable enclosure all as directed by Engr in Charge.

Disconnecting and removing fan of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine and replacement of split pins/ cotter pins and check nuts etc overhauling, lubricating , reassembling, refixing in original position complete all as specified and directed.

Rewinding of burnt ceiling fan of 1200 / 1400mm sweep of any make and model with supper enameled copper wire of suitable size and using insulating material of good quality, varnishing complete all as specified and directed by Engineer -in-charge.

Supply only Sealed ball bearing suitable for ceiling fan of any size(set of two) complete all as specified and directed.

Supply only Rotar shaft suitable for ceiling fan of any size complete all as specified and directed.

Supply only Rubber bushes with MS clamp,bolt and nut suitable for ceiling fan of any size complete all as specified and directed.

Supply only Fan condensor 2.5 mfd suitable for ceiling fan of any size complete all as specified and directed.

Materials and Labour for one coat of spray painting, super glossy to fan body including blades with white colour, after removing of loose paint, rust dust and oily particle by scraping , complete all as specified and as directed.

Supply and lay on wall/in ground/on pole ISI marked XLPE insulated armoured, heavy duty, electric cable with aluminium conductors 1100 volts laid in trenches, floors, ducts, pipes drawn across the road/paths/drain/along poles/walls/floor/equivalent etc including jointing & testing complete all as specified of size 50 Sqmm , 3.5 core all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr width and not exc 1.5 mtr in depth and getting out in hard /dense soil for laying / repairing of LT cable / GI pipe complete all as specified and directed.

Supply, spread river sand of approval in cable trenches providing for cable cushioning as directed. NOTE :- Punned thickness of sand only will be measured and paid complete all as specified and directed.

Removal of surplus soil to a distance not exc 50 mtrs away and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Returning , filling incl spreading levelling watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Supply and lay PCC cable covers for LT cable protection, Class LV, Type 1 of size 250x150x40mm complete all as specified and directed.

Supply and fixing medium grade GI tubing of 50 mm dia for XLPE cable protection complete all as specified and as directed

S & in replace of Vertical type MCCB TPN DB 4 way double door made out of CRCA sheet housing with powder coating complete all as specified and directed.

Supply and replace MCCB 4P, 415V,16KA, 100 amps suitable for Vertical MCCB DB all as specified and directed .

Supply and replace MCB double door DB SPN 8 way with 200 Amps busbar including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface complete all as specified and directed.

Supply and replace MCB double door DB SPN 4 way with 200 Amps busbar including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface complete all as specified and directed.

Supply and fix in repair MCB SPN 40 Amps 240 volts for fixing on MCB DB complete all as specified and directed.

Supply and fix in repair MCB SP 6 to 40 Amps 240 volts for fixing on MCB DB complete all as specified and directed.

Supply and fix in repair Change over switch Four pole, mechanically operated, mounted on insulator and steel frame, with operating mechanism worked from ground level, for current rating upto 200 amps all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, checknuts and washers all as shown in Electrical Plate No.3 of SSR Part-I and connected to main switch board including excavation and earth work, PCC chamber in 1:3:6, RCC Cover in 1:2:4 type B-1 reinforced with 8 mm dia MS bars at 10 cm c/c, 20 mm dia medium grade GI pipe with funnel and wire mesh complete and watering arrangement including testing all as specified and directed by Engr-In-Charge. (Note: GI pipe 15mm dia, GI wire 4mm dia upto 7.5m deemed to be included in quoted rate.)

BHEEMRAO PATIL CONTRACTOR

PARDEEP AND CO

NEWS CONSTRUCTIONS

B AND H CONSTRUCTIONS

K LAKSHMAN SINGH AND CO

A SOMA RAJU

Himagiri Constructions

harshraj and co