GE (N) P/TOKEN- 69 OF 2025-2026 REPAIRS TO ROOF SHEET, CEILING AND CERTAIN MISC REPAIRS AT VARIOUS UNITS (MD/OTM ACCN) IN THE AREA OF AGE B/R (EAST) OF GE (N) PUNE

Material and labour for water proofing treatment to RCC roof slab complete all as specified below and as directed:- (a) Complete Removal of existing waterproofing treatment / membrane including screed bed/ plaster and removing the material where directed to a distance not less than 500m and cleaning the roof surface with water (b) Providing 15 mm thick plaster on roof surface in CM (1:3) with using WPC as per manufacturers instructions. (c) Cleaning the plastered surface and applying Oil Based Bituminous primer @ 0.25 ltrs/ Sqm. (d) Applying hot blown bitumen of grade 85/25 @ 1.20 Kgs/ Sqm. (e) Laying APP Modified bituminous membrane 3mm thick weighing not less than 3.50 Kgs/ Sqm with non woven polyester mat as reinforcement with plain finish laid over hot bitumen on roof surface. (f) Applying two coats of bituminous aluminium paint on APP membrane surface. (g) Overlaps (end and longitudinal) shall be finished by torch application. Note No (i) : Overlaps shall be provided as under End Over Laps - 150mm Longitudinal overlaps 100mm. (ii) : Waterproofing Compound shall be measured and paid separtely under relevant item and above items of work will operated upto 15 metre building of height.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including demolition of existing complete all as specified and as directed

S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

Supply and fix for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed.

Material and labour for roof tiles Mangalore pattern interlocking at side joints, laid dry including dismantling single layer Mangalore pattern or similar tiles in roofing and rubbish off the premises complete all as specified and as directed.

Clean the sunken portion of toilet / Baths/ WCs/ Kitchen thoroughly to remove laitance, dirt, dust etc.

Supply and fix for second class hardwood clean sawn tile battens, cross sectional area exc 5 and n.exc 15 Sqcm spaced at 30 cm centres to centres fixed with nails complete including dismantling of scantling and rubbish off the premises complete all as specified and as directed. (NOTE:Measurements shall be taken overall including both battens and spaces. Deductions shall be made only for openings exceeding 0.40sqm each).

Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bath seal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bath seal Grout” or eqvt. Nahani traps etc to be fitted securely and the gaps around it to be grouted in the same manner.

Dismantling wooden scantling of size 40sqcm and over in section and in any position and position complete all as specified and as directed

Material and labour for second class hard wood, clean sawn, in scantling timber framed work all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness,including nainital or similar pattern roof coverings complete all as specified and as directed.

Material and labour for preparation of battens, any size and spacing and treated all over (measured overall on one side only, spaces not deducted) with two coats of creosote oil complete all as specified and as directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets, ceiling grid etc complete all as specified and as directed

M&L for semi perforated 12 mm thick micro tegular edged or 10 mm square edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRCO.50 to 0.75 as per IS-8225; 1987, Noncombustible as per BS-476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal. T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per Sqm incl both sides) comprising of main-T runners of size 15 x 32 mm of length 3000 mm, cross-T of size 15 x 32 mm inteRMediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2mm, galvanised iron perimeter wall angle of size 24 x 24x o.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out upto 12 Mtr height as per specifications, drawing and as directions of the Engr-in-Charge.

Material and labour for false ceiling with made up of size 1800mm x 1200mm x 12.5mm thick, tapered edge gypsum board (Gypboard) Plain (conforming to IS 2095-Part 1:2011, Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50, Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc Joint Paper tape fixed on metal grid of hot dipped galvanized steel sections and suspended as per manufacturer's specifications and instructions including dismantling of ceiling board of any description and any thickness including cover fillets/ grid etc. Including dismantling existing complete all as specified and as directed. Make: Gyproc-Saint Gobain or equivalent of Armstrong, Diaken, New Age (ACE) as approved by GE.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc, fixed with L-type or J-type or cranked hook/ bolts as specified .

In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dried. Extend the coating upto 150mm above the FFL. Above FFL, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or eqvt can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely.

Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bath seal Plus” or eqvt on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely.

After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed 1:3:6 type B0 mixed with integral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2.

After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of approved makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc.

-Ditto- all as per item No 67, here in before but on 75mm dia of bore

-Ditto- all as per item srl No 89 above but applying two coats.

Ditto- all as per items No 98 but except Paver block.

M&L for coloured ,Glazed ceramic tiles in vertical wall surfaces 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or color cement to match, laid of 10 mm thick plaster in CM (1:4), complete and incl demolition of existing tilesall complete all as specified & as directed.

Material and labour for designer coloured glossy chequered cement concrete tiles of size 30cmx30cmx25mm thick in floor, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in CM (1:6) including dismantling of existing tiles of any description or thickness laid bedded and pointed in cement mortar complete all as specified and as directed.

S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia of bore complete all as specified and as directed

S&F in repair aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kg ISI Marked complete.

S&F in repair bracket for curtain rod of stainless steel 20mm dia fixed with rawl plug and steel screw compete complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc upto 12.0m height of Bldg complete all as specified and as directed

M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement upto 14.0m height of Bldg complete all as specified and as directed

M&L for pre-cast cement concrete block masonry with solid blocks exc 10 cm in width, 1:3:6 mix type C-1, (using 20mm graded stone aggregate) and setting in cement mortar 1:6 including demolition of existing complete all as specified and as directed

M&L for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over a coat of primer on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for preparation of new plastered ceiling surfaces and applying two coats of Oil bound distemper over a coat of primer upto 12.0mtr height of Bldg complete complete all as specified and as directed

M&L for preparation of old wall surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to including complete removal of existing treatment complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for preparation of old surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to mangalore tiles, roof, parap

et, wall ,floor etc, on heritage buildings including complete removal of existing treatment complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for preparation of old decorated surfaces and applying one coat of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for applying two coats of Oil bound distemper over a coat of alkali resistance primer over a layer of wall care putty (1 to 1.5 mm thick) on wall surfaces including complete removal of existing treatment all as specified and directed.

M&L PVC Fibre board Eves/Weather Boarding 18 to 20mm thick and fixed, complete approved arch pattern any size and shape including taking down of existing board all as specified and as directed. Make: Shera wall/Everest/ V board etc

M&L for applying two coats of Oil bound distemper over a coat of alkali resistance primer over a layer of wall care putty (1 to 1.5 mm thick) on ceiling surfaces including complete removal of existing treatment all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of wall including cornices, plaster by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying one coat of Oil bound distemper on old surfaces of walls all as specified and directed.

M&L for preparation of old plastered or unplastered ceiling surfaces including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying one coat of Oil bound distemper all as specified and directed.

M&L for preparation of old surfaces of wood and applying one coat of synthetic enamel paint on ceiling surface complete all as specified and as directed.

M&L for preparation of old wooden/wood base surfaces of wall/floor and applying two coat of malamine polish with spray guns, compressor etc complete till fine glossy surface is obtained, including filling of cracks and holes etc complete all as specified and as directed.

Each Leaf

M & L for preparation of external surfaces of walls and appying two coats of chemical water proofing treatment on wall and chajja terrace and parapet walls, grooves etc. such as , CEMISTIK PU 50 heavy Duty warerproofing coating or equivalent complete all as per manufacturer instruction as directed.

M&L for preparation of old wood or wood based surface and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm aggregate) Cement concrete as in sub base including demolition of damaged PCC sub base complete all as specified and as directed

M&L for crushed sand for cushioning under paver blocks complete all as specified and as directed

M&L for Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platfoRM,WHB platfoRM and like set in cement mortar (1:4) including pointing in white or coloured cement (1:2) using marble dust with admixer of pigment to match with marble shade including dismantling of existing stone slab complete all as specified and as directed

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and as directed

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) 75 mm thick in plinth protection, laid in alternate bays not exc. 3.0m in length, finished surfaces even and smooth without using extra cement including demolition existing concrete and rubbish off the premises complete all as specified and as directed

S&F in repair glass shelf of size 500x125mm(drop) with chomium plated railing fixed with and including chromium plated bracket complete complete all as specified and as directed Make:Prayag Cat Pt No BEA-45G or equivalent

S&F in repair corner glass shelf of size 300mm dia and 8mm thick with chomium plated railing fixed with and including chromium plated bracket complete complete all as specified and as directedMake:Prayag Cat Pt No BEA-44G or equivalent

S&F in repair hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and directed by Engr-in-charge. Make : Prayag Cat Pt No GBEA-907 or equivalent

S & F in repair brass chromium plated soap dish , fixed to wall with CP brass screws, complete all as specified and as directed Make: Prayag Cat Pt No GBA-135 or equivalent

S & F in repair Brass Chromium plated towel rail 600mm long fixed with brass/stainless screws complete all as specified and directed. Make: Prayag Cat Pt No GBA-131 or equivalent

S & F in repair Brass Chromium plated towel rack fixed with brass/stainless screws complete all as specified and directed. Make: Prayag Cat Pt No GBA-133 or equivalent

S&F in repairs pillar taps swan neck suitable for 15mm bore pipe long body fancy type brass CP with capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified and as directed Make : Prayag Cat Pt No 6514 or equivalent

S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make :Prayag Cat Pt No 7875-N or equivalent

S&F in repair 125 mm round shower rose with 225 mm long SS arm with flange complete all as specified and directed. Make :Prayag Cat Pt No GBOS-606 or equivalent

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Dismantling of structural steel work of any description including doors, gates, framed trusses etc. complete all as specified and as directed.

Supply and fix mild steel work in tubular trusses, beams, rafters, purlins, main columns, posts etc., for structural work includinguding special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes confoRMing to IS: 4923-1997 grade St.-240 fixed with angle cleats or other connecting plates complete all as specified and as directed.

M&L for mild steel framed work such as grill, grating etc. with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work confoRMing to Fe 290 Gde-E-165 complete all as specified & as directed.

Supply and fix rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,confoRMing to Fe-290 Grade-E-165 complete all as specified and as directed.

M&L for repair to Aluminium door/windows of any description area exc 1 Sqm but not exc 2 Sqm each, taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminium snap beading, re-setting floor/ hydraulic spring etc complete all as specified and as directed

S&F in repairs sensor urinal fixed with urinal pot with necessary fittings including PVC connection etc complete all as specified and as directedMake:Prayag Cat Pt No GBSU-101 or Cera/Jaguar/Parryware equivalent.

Supply and fix in repairs one piece vitreous china wash down floor mounted coupled water clo