GADMUDSHINGI WATER SUPPLY SCHEME TAL KARVEER DIST - KOLHAPUR

Sub-Work No.1 :- Packaged WTP ( Cap. 2.0MLD) Designing (aesthetically), providing, fabricating Package Water Treatment Plant at the shop, transporting to site, installing, testing and commissioning at the site, giving necessary one month's free test and trail run with guarantee for one year, etc. complete. Prefabricated Package Water Treatment Plant comprising following : 1) Rapid mixing channel in M.S. sheets and M.S. baffle. 2) Flocculator not less than 10 minutes detention, in M.S. prefabricated box, flocculation being achieved either by glass pebbles of graded size or PVC tetrapod or equivalent arrangement to ensure good floc formation. 3) Plate or tube settlers of not less than 30 minutes detention in M.S. prefabricated box, the plates / tubes mounted in the settler basin with inclination of not less than 60 degree to horizontal. 4) Rapid sand gravity filter in M.S.prefabricated box with filter sand not less than 500 mm thick, supported on false floor below with polypropylene nozzles floor below with polypropylene nozzles spaced at not more than 500 mm centres in either direction. 5) Backwashing, inlet & outlet facilities shall be provided. Air blowers - Air Blowers are not required for WTP having capacity less than and equal to 3 MLD, for WTP having capacity more than 3 MLD air blowers capacity of delevering 600 LPM per sqm of free air of filter area 0.4 kg/sqcm at underdrain (100% standby) Wash water tank capacity equal to 2 % of designed quantity of filer water in a day + 10 %wash water pump with 100 % standby (Minimum 3 HP with all accessories) Backwash with water not less than 0.6 cum/sqm of filter bed area in filter box. Piping of outlet upto sump 6) Laboratory equipments 7) External & Internal electrification 8) TCL solution tank with mixing, carrying and dosing arrangement with piping. 9) Gravity feed gas chlorinator with 100% standby. 10 ) Four alum storage unit 11) Drainage arrangement 12) Providing room with RCC roof for office and Lab space with necessary water supply & drainage arrangement & internal roads 13) RCC sump of one hour cap.and pump house on it. 14) Internal Road 15) Wire fencing with gate for WTP premises. 16) All civil works for foundation, consisting of raised RCC platform above G.L. or walls in B.B. masonry or UCR masonry shall be provided as per needs at site. 17) Bypass in the form of pipes or M.S. channels included in the design, effecting bypass of such new tank and filter individually or both. (Limit upto 5.0 M. from W.T.P. face) 18) The entire M.S. fabricated tank provided with FRP lining (5 mm thick) to inside face in contact with water epoxy painting- two coats with one coat of primer on outside. The thickness of plates employed shall not be less than 6 mm 19) Alum dosing and mixing arrangements to be provided in twin tanks, each of 8 hours capacity, capable of importing does of 20 ppm with 5% solution. The alum tanks provided with a dose in steps of 5 ppm and entire unit mounted on the top of flocculator / settler box, in the form of prefabricated structure, with access platform and ladder. Alum boxes with FRP lining (5 mm thick) inside and epoxy paint two coats with one coat of primer on outside. 20) Both flocculator and settling basins provided with hopper bottom with slope not less than 45 degrees to the horizontal drain pipes and valves provided to both flocculator and settling basin. 21) Flow ratings to conform following parameters : a) Velocities in channels not to exceed 0.6 M./Second. b) Velocities in filter outlet pipes and valves not to exceed 1 M./Second. c) Velocities in interconnecting pipe and controls not to exceed 1M./Second. d) Backwash with air : Not required. e) Backwash with water : Not less than 0.6 M./ Sqm. of filter bed area in filter box. 23) Free board for all units not less than 300 mm 23) Rates as above include all taxes, octroi and duties which would be specific to the site locations. Package Water Treatment Plant- 83 Cum/Hr. (2.00 MLD)

Sub Work No. 2 - Raw Water Rising Main Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distace of 50 metres and lifts as below, stackig and spreading as directed, normal dewatering, preparing the bed for foundation and excluding, backfilling, etc. complete.

Excavation for foundation / pipe trenches in hard murum and boulders,W.B.M.road including removing the excavated materials upto distance of 50 m Beyond the area & lift as below stacking and spreading as directed by Engg. in charge normal dewatering preparing the bed for foundation and excluding backfilling etc. complete.,

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond area and lifts as below, stacking as directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M

Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling, by machnial means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete.by all means.

Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15 cm. to 20 cm. layers including watering ad compaction complete.

Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form. A) 315 mm dia. 6 Kg/Sqcm class

Lowering, Laying and Jointing and hydraullic testing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II A) 315mm dia. 6 Kg/Sqcm class

Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. A) 315 mm dia PE-100 HDPE pipe 6 kg/sqcm

Providing and supplying and Laying of Electro Fusion Fittings in accordance with BNS EN12201 Part-3 suitable for drinking water with in black/blue colour manufactur-ed from compounded PE80/ PE100 virgin polymer and compatible with PE80/ PE100 pipes in pressure rating SDR11 with min. PIN12.5 rated for water application and shall be inclusive of all cost such as testing, all the taxes related to central, state & municipal, inspection charges, transportion, insurance, loading, unloading, stacking etc, complete. Couplers 315

Equal Tee 315

Elbow 90 Deg. 315

Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspec- tion charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988. A) 450 mm Dia NP III Class

Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, etc. complete as directed by Engineerin- charge (For all class of pipes.) as per IS- 783-1985. A) 450 mm Dia NP III Class

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Sluice valves - PN -1.0 (With by pass arrangement) A) 100mm Sluice Valve

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)Giving satisfactory hydraulic testing of following C. I. D / F Reflex valves, Butterfly valves and Sluice valves. A) 100mm Sluice Valve

Giving satisfactory hydraulic testing of following C.I.D / F Reflex valves, Butterfly valves and Sluice valves.

Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications double orifice type combined with isolating sluice valve, mounted in horizontal position and operated by wheel gearing, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental store, excluding GST levied by GOI & GOM in all respect etc. complete. A) 100 mm air valve Double Ball

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). A) 100 mm air valve Double Ball

Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -incharge for following diameters of pipe lines (type design attached.) A) Foundation on murum and hard strata

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores/site, and stacking, etc.complete.

Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion 12 mm thick cement plaster in C.M. 1:4 proportion on both sides with providing adn fixing RCC manhole frame and cover in RCC 1:2:4 coping or RCC proportion, 15 cm thick slab etc complete as directed by Engineer-in-charge. A) Size 0.90 x 0.90 x 0.90

Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete.(Cement 5.90 bags/cum)

Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.

Making cross connection to existing distribution main of any type including excavation, breaking and removing existing pipes, lowering, laying of specials and pipes in their position, refilling, closing the water supply in that area, dewatering and restarting the water supply, etc. complete as directed by Engineer-in-charge for following diameters of existing pipeline, irrespective of diameter of branch line. (The number of joints involved will be paid separately depending upon the nature of joints and required pipes, valves and specials will be supplied free of cost at stores.) 300mm dia

Sub Work No.3- Pure Water Pumping Machinary Providing, erecting and giving test of Openwell submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump Section & Code No. Sr. No Unit Supply Rate Rs Erection Rate Rs Total Amt Rs. Description suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump.Submersible Pump 150 mm dia (with Bronze / Stainless steel(CF8M) Impeller) up to 15 stages 17.5 HP Openwell submersible Pump set 31.03 LPS 20 M. Head

Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc.complete as per IS-1239/2004. A) 150 mm dia B Class

Supplying & erecting flat flexible 3 core PVC sheathed submersible type copper ca

ble suitably clamped at fixed intercals with cable clips on drop pipe as complete. (3 core 6 sqmm)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and erecting pannel board that includs following items (1) Tripale pole switch, (2) Water level guard (3) Voltmeter (4) Amperemeter (5) Sets of pilot lamp (6) Starter DOL / Star deta (7) Capacitor (8) Sector Switch (9) Earth Leakage Circuit Breaker (ELCB) (10) M.S. Sheat Box (11) T.W. planks (12) Iron pannel board (13) G.I.sheet caution board (14) self lock etc complete.

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete.

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores site, and stacking, etc.complete. Double flanged specials

Supplying and erecting marine (Waterproof) plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete with compliance to IS 720:2010

Providing & erecting TP MCB 63A, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB For lighting & capacitor

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Providing, erecting triple spur gear type Chain Pulley Block suitable for capacity 2 Tonne with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark.

Providing, erecting Pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia G.I. Pipe. Pressure gauge shall be installed as directed, with tapping on rising main.

For labour charges for internal wiring of pannel including all materials 1) 11 HP to 30 HP twin set pannel

Travelling Trolley Providing, erecting Travelling Trolley of capacity 2 Tonne with 6 m lift, tested to 50% over load

Supply, install and commission Electromagnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/-0.5% of measured value & protection as per given specifications for size 100 mm-1000mm including sensor, transmitter surge arrestor, cable GI duct if suitable size for 25 mtrs built in GSM ( with Simcard and its charges,valid for 36 months) including the pipe cutting, leveling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee etc complete, as may be required at site & based on technical specifications. (150mm)

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. A) 150 mm dia SLV-PN-1

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) A) 150 mm dia SLV-PN-1

Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) A) 150 mm dia NRV-PN-1

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) A) 150 mm dia NRV-PN-1

Providing structural steel work in rolled sections like joists, channels, angles, tees, etc. as per detailed designs and drawings including fixing in position without connecting plates, braces, etc. and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade, etc. complete. (Bd-C-2/275)

Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags cum)

Tools

Excavation for foundation / pipe trenches in hard murum and boulders,W.B.M.road including removing the excavated materials upto distance of 50 m Beyond the area & lift as below stacking and spreading as directed by Engg. in charge normal dewatering preparing the bed for foundation and excluding backfilling etc. complete.,

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond area and lifts as below, stacking as directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M

Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling, by machnial means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete.by all means.

Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15 cm. to 20 cm. layers including watering ad compaction complete.

Sub Work No.4- Pure Water Rising Main Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distace of 50 metres and lifts as below, stackig and spreading as directed, normal dewatering, preparing the bed for foundation and excluding, backfilling, etc. complete.

Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition/ revision with amendments for Rubber Gaskets. 300 mm dia. D.I.K-7

Erecting and hoisting in position and jointing, testing M.S./ C.I. D/F pipes and specials in vertical position including cost of all jointing materials (rubber packing, nut bolts, etc.) labour, scaffolding, hydraulic testing etc. complete. 300mm

Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523. For all types of specials, bends tees etc. a)80 to 300 mm dia.

Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original positionusing water supplied by the contractor. 300 mm dia. D.I.K-7

Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in allrespect, inspection charges, transportation to stores, etc.completeas per IS-123

9/2004.Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below. 150mm Dia

25mm Dia

Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in verticalposition,as directed by Engineer-in-charge. 150mm Dia G.I. Pipes

25mm Dia G.I. Pipes

Supplying and erecting "B" class G.I. Bend in position with necessary material 150mm dia

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Sluice valves - PN -1.0 (With by pass arrangement) Sluice valve 150mm Dia

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)Giving satisfactory hydraulic testing of following C. I. D / F Reflex valves, Butterfly valves and Sluice valves. Sluice valve 150mm Dia

Giving satisfactory hydraulic testing of following C. I. D / F Reflex valves, Butterfly valves and Sluice valves. A) 150 mm dia SLV-PN-1

Providing and supplying Air Valves as per IS-14845 -2000 and MJP’s standard specifications double orifice type combined with isolating sluice valve, mounted in horizontal position and operated by wheel gearing, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental store, excluding GST levied by GOI & GOM in all respect etc. complete. A) 100 mm dia A.V. Double Ball

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). A) 100 mm dia A.V. Double Ball

Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -incharge A) Foundation on murum and hard strata

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc.􀀃complete.

Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.

Valve Chamber with Precast RCC Covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion, 15 cm thick slab etc complete as directed by Engineer-in-charges. A) Size 0.90 x 0.90 x 0.90

Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete.(Cement 5.90 bags/cum)