GE (I) R AND D/CHD-100/2024-25 REPAIR/REPLACEMENT OF KITCHEN CABINET AND ALLIED WORKS IN MD ACCN UNDER AOR OF AGE B/R R AND D CHANDIGARH

Amount

Material and labour in repair for 18mm thick both side pre-laminated high density high moisture resistances (HDHMR) board any colour wood grains, with white base paint finish UV HDHMR corner side rounding with edge bending tape, PVC boxes, drawer any shape and sizes will be made up by machines matching with final finish (UV) complete all as specified and directed. (Note :- Design and colour shall be approved by GE)

Supply and fixing for stainless steel handle 100mm complete all as specified and directed

Supply and fixing for leg PVC 100mm complete all as specified and directed

Supply and fixing for stainless steel inotech, pot & pan complete all as specified and directed

Supply and fixing for wiker basket 600mm eoan/stainless steel base complete all as specified and directed

Supply and fixing for stainless steel bin holder complete all as specified and directed

Supply and fixing for stainless steel detergent holder complete all as specified and directed

Supply and fixing for PVC catllery 800 mm complete all as specified and directed

Supply and fixing for stainless steel dish rack 900 mm complete all as specified and directed

Supply and fixing for stainless steel bottle pullout 300mm complete all as specified and directed

Supply and fixing for stainless steel masule pullout 300mm complete all as specified and directed

Supply and fixing for stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full thread steel screws including making necessary recess in board and finished etc. complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removing to store complete all as specified supplying and fixing 15mm bore steel water tubing galvanised 15mm bore, medium grade including fitting fixed to walls and ceiling or in floor complete with necessary fittings complete all as specified and directed.

Dismantling floor/hearth or wall tile including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed.

Material and labour for non-skid colour ceramic tiles (joint free) 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exe 0.18 sqm , as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing area over and including 15mm thick screed bed or bedding of cement mortar (1:6) complete all as specified and directed.

Material and labour for glazed ceramic digital tiles 300x450x7mm/300x600x7mm thick coloured/printed as in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or colour cement to match as in dado over and including 15 mm thick cement screeding (rendering) in CM (1:4) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in mortar complete all as specified and directed.

Material and labour for 18-20mm thick machine cut granite (of any type) fixed on kitchen platform etc over & including 10mm thick screed bed in CM (1:4) and jointed with grey cement slurry along with 12mm thick in CM 1:3 in vertical surfaces and pointing with white cement 1:2 using marble dust and pointed with white cement and admixture of pigment to match the shade of granite stone including with cutting and polished complete all as specified and directed.

Material and labour for rounding to edges of granite stone slab for kitchen platform etc. one edge complete all as specified and directed.

Taking down cement plaster of any description including racking out joints, scrubbing for key, scrubbing down with water tec complete all as specified and directed.

Material and labour for rendering 15 mm thick on fair faces of brick work surfaces in internal wall with CM (1:4) finished smooth and even without using extra cement complete all as specified and directed

Material and labour for rendering 6 mm thick on fair faces of brick work surfaces in ceiling with CM (1:4) finished smooth and even without using extra cement complete all as specified and directed.

Material and labour for preparation of plastered or un plastered surface of wall including plaster and conies etc and applying two coats of plastic emulsion paint over and including layer of wall care putty and one coat of primer on wall complete all as specified directed.

Demolition of reinforced cement concrete in RCC Slabs, beams , roofs and walls, basement walls and in founding complete all as specified and directed.

Material and labour for RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in shelves , columns and RCC Slabs of kitchen platform , chajja, beams, cantilever, bressummers, lintel or gully trap etc complete all as specified and directed.

Material and labour for of form work to chullah hoods , chajja , slab and similar items including edges / sides and soffits of lintels etc fair finished surface of concrete flat complete all as specified and directed.

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hooping for columns, plinth band, lintels etc hooking ends and binding with a including mild stell wire (annealed) not less than 0.90mm dia or securing with clips quality conforming complete all as specified and directed.

Supply and fixing in repair for brass CP sink mixer flexible for mixing hot and cold water screwed down for iron pipe 15mm complete all as specified and directed.

Supply and fixing for stainless steel sink in repair with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm complete all as specified and directed.

Taking down carefully copper /aluminium point wiring (Light, fan, socket, or power) complete including fittings and fixture such as switches, ceiling roses pendants, regulators sockets / DBs / main switches include boards etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately), removing material, from site and making good the disturbed surfaces of walls, floor complete all as specified and directed.

Material and labour for point wiring for one light point/fan point controlled by one switch with 1.5 sqm PVC insulated and unsheathed FRLS copper conductor single core multi stranded flexible copper cable 1100 Volts grade conforming to IS-694 using approved colour code as per IS code drawn through existing non metallic rigid PVC conduit in concealed along with PVC insulated and unsheathed FRLS 1.5 sqm multi stranded copper conductor cable 1100V (green colour) as continuous earth lead wire connected to common earth and earth dolly complete all as specified and directed. Note: (i) If concealed conduit not exist at site and require for cutting chase the wall , the rate of cutting chases required for concealing the PVC conduits and pvc conduit alongwith the fittings / fixtures like elbow, bends , conduit etc. and making good the disturbed surface is measured and paid for separately under relevant item.

All as per serial item no 31.00 above but for 06 amp socket outlets point controlled by one switch on Independent board with the cable 1.50 sqm size -ditto-

All as per serial item no 31.00 above but for 06 amp socket outlets point controlled by one switch on same board with the cable 1.50 sqm size -ditto-

All as per serial item no 31.00 above but for 16 amp socket outlets point controlled by one switch on Independent socket outlet using 2.5 sqm PVC insulated and unsheathed FRLS copper conductor single core multi stranded flexible copper cable 1100V of approved colour code as per IS code for phase and neutral along with PVC insulated and unsheathed FRLS 2.5 sqm multi stranded copper unsheathed cable 1100V (green colour) as continuous earth lead wire connected to common earth and earth dolly -ditto-

Supply and fixing for 6 module cover plate with frame as per site requirement complete all as specified and directed

All as per serial item no 35.00 above but 3 module -ditto-

Supply and fixing for 6 modular metal flush box as per site requirement complete all as specified and directed.

All as per serial item no 37.00 above but 3 module -ditto-

Supply and fixing for modular switch 1 way 6 amp 1 module complete all as specified and directed.

Supply and fixing for modular switch 1 way 16 amp 1 module complete all as specified and directed.

Supply and fixing for modular socket outlet 6 amps, 2/3 pin combined 2 module complete all as specified and directed

Supply and fixing for modular socket outlet 6/16 amps, 2 / 3 Pin combined 2 module complete all as specified and directed

Supply and fixing for ceiling rose, 3 terminal PVC/polycarbonate body complete all as specified and directed.

Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good complete all as specified and directed.

Supply and fixing for rigid non-metallic PVC conduit of external dia 20 mm exclusive of boxes (junction/ terminal) for concealed wiring complete all as specified and directed.

Taking down carefully by unscrewing from wall / ceiling , fittings and fixtures such as tube light fittings and refixing including provision of suitable wiring from ceiling rose complete all as specified and directed.

KUMAR AND COMPANY (BID ID -3265004)

M/S MATLOOB AHMED (BID ID -3269735)

M/S SATYA SAI CONSTRUCTION (BID ID -3269377)

RAJESH KUMAR (BID ID -3269613)

GOODWILL ENGINEERS (BID ID -3264626)