Repairing work in Residence no.- 15/1 and 10 at Canal Colony, Cantt Road, Lucknow. (Lot-4)

Amount

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a sigle 15 mm C.P. brass pillar taps

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931 15mm nominal size

Providing and fixing C.P. Brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore

Providing and fixing C.P. Brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore

Providing & fixing C.P. brass Shower rose with 15 or 20 mm inlet 100mm diameter

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore

Providing and fixing 8 mm dia C.P. /S.S. Jet with flexible tube upto 1 meter long with s.s. triangular plate to Eureopean type W.C. of qualtiy and make as approved by Engineer-in-charge

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fitting complete. 32 mm dia / 40 mm dia

Providing and placing on terrace (at all floor levels) polyethylene water strorege tank ISI:12701 marked with over and suitable locking arrangement an making necessary holes for inlet, out let and over flow pipes but with out fittings and the base support for tank.

Cement concrete flooring 1:2:4 (1 Cement : 2 Coarse sand : 4 Graded stone aggregate) finished with a floating coat of neat cment including cemnt slurry, but excluding the coat of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate.

Providing and fixing wire gauge shutters using Galvanized M S wire guage of average width of aperture 1.4 mm in both directions wire of dia 0.06 mm , for door windows and clerestory windows with hinges and neccessary screws : 35 mm thick shutters, with ISI marked stainless steel butt hinges of required size . Second class teak wood .

Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply vereering with vertical grains or cross bands and face vereers on both faces of shutters: 35 mm thick including ISI markded Stainless Steel butt hinges with necessary

Providing an fixing ISI marked oxidised MS sliding door bolts with nuts and screws etc complete 300x16 mm

Providing an fixing ISI marked oxidised MS Tower bolts black finish (Barrel type ) with necessary screws etc. complet 300x10 mm

Providing an fixing ISI marked oxidised MS Handles conforming to IS:4992 with necessary screws etc. complet 125 mm

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand), finished smooth with a floating coat of neat cementon walls and bed concrete etc. complete as per standard design:Constructing brick masonry chamber for underground C.I. inspection chamber and bends withbricks in cement mortar 1:4 (1 cement :4 corse sand) c I cover with frame (light duty)445 x 610 mm inetrnal dimension total cover with frame to be not less than38 kg , R C C top slab with 1 ; 1.5 :3 mix (1 cement :1.5 Inside dimensions 500x700 mm and 45 cm deep for pipeline with one or two inlets

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm apperture with matching wood beeding

M/s Santosh Kumar Shrivastava