Rates through E-Quotation for items/materials Related to Furniture and Miscellaneous Items

Supply & Installation of DUSTBIN 100 Litres litres HDPE waste containers or rigid liners.Utility-Public (Mobile containers confirming IS: 12402).Material -HDPE.Bin Capacity (Volume) (Ltrs)-100 Litres.Wall -Non- Perforated.Lid -Swing type.Weight of Dustbin (Complete unit) (Grams)-12500.Gripping Provision-Both Frontal &Ventral.Dust Bin stand -With.No. of Compartments in the Bin-Twin Bin.All complete work as per E/I.

Supply and Installation of Cast Iron Powder Coating Garden Bench, Capacity 3 Seater NA (GARDEN BENCH 3 SEATER KB).Seating Capacity -3 Seater.Finsh-Powder Coating .Weight Bearing Capacity-110 kilogram.Side Frame Material-Cast Iron.Seat Material & Back Rest Material -Mild Steel Pipe 14 Gauge.Total Height -915 millimeter.Seat Height -401 millimeter.Width-450 millimeter.Total Area Required-1550 millimeter.All complete work as per E/I.

Supply and Installation of SEASAW Jungle Rumble Play Zone.Design slides, serpentine Slides and covered slides material-Premium quality FRP (fibre reinforce plastic).Roofs -Premium quality FRP (fibre reinforce plastic).Bridges floor-Premium quality FRP (fibre reinforce plastic).Thickness of slides-3 mm.Thickness of roof-3 mm.Thickness of bridge floor-3 mm.Material for stairs, bridge railing, slides supports-25 mm (B class conforming to IS 1239 latest) PU coated with the layer of thickness of 60 microns.Material for supporting stands-25 mm (B class conforming to IS 1239 latest) PU coated with the layer of thickness of 60 microns.Design-As per representative image - uploaded at QR/Spcn-Product Structure-G.I pipe Stairs – open and closed FRP slider – FRP bridges with pipe railing – huts type FRP roof supported by G.I pipes.Dimension ± 10 mm-Length - 13500 mm X Width - 6500 mm X Height - 3250 mm.FRP sheets finish -G.P resin of 3 mm to 4 mm thickness applied above the surface of gel coat which is dully mixed with U.V stabilized pigment to provide resistance to ultra violet light degradation.GI pipe finish-PU paint over two coat of epoxy primer.All complete work as per E/I.

Supply and Installation of SWING Jungle Rumble Play Zone.Design slides, serpentine Slides and covered slides material-Premium quality FRP (fibre reinforce plastic).Roofs-Premium quality FRP (fibre reinforce plastic).Bridges floor -Premium quality FRP (fibre reinforce plastic)-Thickness of slides-3 mm.Thickness of roof-3 mm.Thickness of bridge floor-3 mm.Material for stairs, bridge railing, slides supports.25 mm (B class conforming to IS 1239 latest) PU coated with the layer of thickness of 60 microns.Material for supporting stands.25 mm (B class conforming to IS 1239 latest) PU coated with the layer of thickness of 60 microns.Design -As per representative image - uploaded at QR/Spcn.Product Structure -G.I pipe Stairs – open and closed FRP slider – FRP bridges with pipe railing – huts type FRP roof supported by G.I pipesDimension ± 10 mm-Length - 13500 mm X Width - 6500 mm X Height - 3250 mm.FRP sheets finish -G.P resin of 3 mm to 4 mm thickness applied above the surface of gel coat which is dully mixed with U.V stabilized pigment to provide resistance to ultra violet light degradation.GI pipe finish-PU paint over two coat of epoxy primer.All complete work as per E/I.

Supply and Installation of KID REVOLVING Jungle Rumble Play Zone.Design slides, serpentine Slides and covered slides material-Premium quality FRP (fibre reinforce plastic).Roofs -Premium quality FRP (fibre reinforce plastic).Bridges floor-Premium quality FRP (fibre reinforce plastic).Thickness of slides-3 mm.Thickness of roof -3 mm.Thickness of bridge floor-3 mm.Material for stairs, bridge railing, slides supports-25 mm (B class conforming to IS 1239 latest) PU coated with the layer of thickness of 60 microns.Material for supporting stands-25 mm (B class conforming to IS 1239 latest) PU coated with the layer of thickness of 60 microns.Design-As per representative image - uploaded at QR/Spcn.Product Structure-G.I pipe Stairs – open and closed FRP slider – FRP bridges with pipe railing – huts type FRP roof supported by G.I pipes.Dimension ± 10 mm -Length - 13500 mm X Width - 6500 mm X Height - 3250 mm.Area for play zone -48 feet X 20 feet.FRP sheets finish -G.P resin of 3 mm to 4 mm thickness applied above the surface of gel coat which is dully mixed with U.V stabilized pigment to provide resistance to ultra violet light degradation.GI pipe finish -PU paint over two coat of epoxy primer.All complete work as per E/I.

Supply and Installation of Slide Ladder (Preschool Kit) Virgin Polycarbonate and Multi curve configuration.Slide ladder made up of virgin grade polyethylene plastic-Virgin Polycarbonate.Bolts quality (to provide greater stability to slide)-To provide as per approved advance sample.Overall length of the product (when assembled)-2415mm.Overall width of the product (when assembled)-965mm (Stare supporting base) and 432 mm (Sliding part).Overall height -1143 mm.Length of sliding part-1829 mm.Length of the stair panel-1 270 mm.Step rise of each stair-445 mm long.Minimum overall plastic weight of product-16 Kg.All complete work as per E/I.

Supply and Installation of Outdoor Gym Equipments Leg Press Double.Type-Leg Press Double.User Weight ( Kg )-120 kilogram.Length -1000 millimeter.Width-650 millimeter Governing Specification for GI Pipes -BIS specification No IS 1161:2014, latest.Main Central Pipe-125 mm Nominal Bore G.I. Pipe.Main Central Pipe, Class as per IS 1239-Heavy.Movine Frame Pipe-40mm Nominal bore.Maximum User Weight-120 KG.Foot Rest Frame/ Foot Rest Hinging Pipe-32mm Nominal Bore G.I. Pipe.Foot Rest Frame Pipe, Class as per IS 1239-Heavy.MS Foundation Plate Thickness-12 millimeter.Foundation Pipes with anchoring-750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm.Nominal Bore of Foundation Pipe-125mm.Galvanization of all Pipes-Zinc coating on the tubes shall be in accordance with IS 4736 latest..Bearings-Tapered Roller Bearing.Bearings shall be self lubricating and sealed for protection against Rain and dust etc-Yes.Seat and Back Rest-6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges.Foot Rest-Aluminum casting material.Thickness of closing caps -2 millimeter.All Plastic Components-U V stabilised, weather resistance.Paint// Finish-Powder Coated, UV resistant.Paint Coating Thickness ( min )-80 micrometer.Instruction Plate-Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing.All complete work as per E/I.

Supply and Installation of Triple Twister ( Three standing) Twister - Outdoor Gym Equipment.Type-Triple Twister ( Three standing).Length-1400 millimeter.Width-900 millimeter.Height-1200 millimeter.Maximum User Weight-120 kilogram.Governing Specification for GI Pipes-BIS specification No IS 1239 ( Part 1 )- 2004, latest.Main Central Pipe-125 mm Nominal Bore G.I. Pipe.Main Frame Pipe, Class as per IS 1239-Heavy.Main Central Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness-125 mm NB with 4.5 mm Thickness.Grade Material as per table2oflS1161-YSt 355.Standing/ Sitting Twister Frame Pipe-50 mm Nominal Bore G.I.Pipe.Standing/ Sitting Twister Frame Pipe (As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness-50 mm NB with 4.5 mm Thickness.Grade Material as per table 2 IS 1161-YSt 355.Rotating Disk Support Pipe at Bottom Pipe-125 mm Nominal Bore G.I. Pipe.Rotating Disk Support Pipe (asper IS 1161 ) as per Clause 3, Nominal Bore & Wall Thickness-125 mm NB with 4.5 mm Thickness125 mm NB with 4.5 mm Thickness-40 mm Nominal bore G.I. pipe.Foundation Pipes with anchoring-750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm.Nominal Bore of Foundation Pipe-150mm.Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness-125 mm NB with 4.5 mm Thickness.M S Foundation Plate Thickness-12 millimeter.

Galvanization of all Pipes-Zinc coating on the tubes shall be in accordance with IS 4736 latest.Bearings-Tapered Roller Bearing.Nuts and Bolts for Assembly-Stainless Steel.Foot Rest-Fibre Reinforced Plastic.Closing Caps of open ends of the pipes, bearings, bushes and base-Fibre Reinforced Plastic.Thickness of closing caps-2 millimeter.All Plastic Components-U V stabilised, weather resistance.Paint Coating Thickness-100 micrometer.Instruction Plate-Stainless Steel, Size 150 X 230 X 0.7mm, with indelible printing.All complete work as per E/I.

Supply and Installation of Parallel Bar of 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm Parallel Bar - Outdoor Gym Equipment.Type-Parallel Bar/ Double Bar consisting of two frames with each frame consisting of one Horizontal bar and two vertical bars.Governing Specification for GI Pipes-BIS specification No IS 1239 ( Part 1 )- 2004, latest.Vertical/ Standing Pipes-100 mm Nominal Bore G.I. Pipe.Vertical/ Standing Pipes, Class as per IS 1239-Heavy.Vertical/ StandingPipe (as per Clause 3 of IS 1161), Nominal Bore & Wall Thickness-100 mm NB with 3.6 mm Thickness.Horizontal Pipe-32 mm Nominal Bore G.I. Pipe.Horizontal Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness-32 mm NB with 3.2 mm Thickness.Foundation Pipes with anchoring-750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm.Nominal Bore of Foundation Pipe-100 mm.Foundation Pipe, Class as per IS 1239-Heavy.Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness-32 mm NB with 3.2 mm Thickness.M S Foundation Plate Thickness-12 millimeter.Galvanization of all Pipes-Zinc coating on the tubes shall be in accordance with IS 4736 latest.Bearing-Tapered Roller Bearing.Nuts and Bolts for Assembly-Stainless Steel.Foot Rest-Fibre Reinforced Plastic.Closing Caps of open ends of the pipes, bearings, bushes and base-GI Caps.Thickness of closing caps-2 millimeter.All Plastic Components-U V stabilised, weather resistance.Paint Coating Thickness-80 micrometer.Friction Plate-Stainless Steel, S 150 X 230 X 0.7mm, with indelible printing.