PROVN OF ENTRY GATE ALONGWITH CONNECTING ITEMS NEAR MI ROOM AT MH PACHMARHI

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out all kind of soil the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m complete all as specified and directed.

Material and Labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, mass concrete etc complete all as specified and as directed.

Material and Labour for Reinforced cement concrete M-25 (Design mix) using 20mm graded stone aggregates as in foundation, including raft, footings foundation beams, plinth beams, bases for columns, basement slabs and like that complete all as specified and as directed.

All as per Item No. 4 but as in columns complete all as specified and as directed.

All as per Item No. 4 but as in beams complete all as specified and as directed.

M & L for Use and waste formwork to side of concrete foundation, footings bases of columns, sides and soffits of plinth beams for rough finished flat surfaces complete all as specified and as directed.

All as per Item No. 7 but as to side of columns complete all as specified and as directed.

All as per Item No. 7 but as to sides and soffits of beams complete all as specified and as directed.

Material and Labour for TMT bars 10mm dia and over dia cut to length, bent to shape required, including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 9mm dia or securing with clips complete all as specified and as directed.

All as per Item No. 10 but but for 5 to 10mm dia bars as in stirrups, spacers and like that complete all as specified and as directed.

M&L for brick work built in cement mortar (1:6) using fly ash bricks straight or curved on plan exceeding 6m mean radius complete all as specified and directed.

Material and Labour for PCC 1:3:6 type c1 using 20mm graded stone aggregate as in coping including necessary formwork complete all as specified and as directed.

Material and Labour for rendering in CM 1:6, 15mm thick on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed.

Material and Labour for applying two coats cement base paints over one coat of alkali resistant priming paint on newly plastered wall surfaces including preparation complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm in soils complete all as specified and as directed.

Removal excavated material to a distance exc 250 but not exceeding 500 M and depositing where directed at a level n. exc. 1.5 m above starting point as in soils complete all as specified and as directed.

Supplying and Fixing of PVC (SWR) single sockted 110 mm bore of pipes as in weep holes of compound wall complete all as specified and as directed

S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified and as directed.

S&F for 0.63 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

M&L for preparation of new steel serfaces and applyingTwo coats of synthetic enamel paint over & including a coat of primer complete all as specified and as directed.

M&L for 20 mm thick granite of any type tiles machine cut in vertical surface laid and fixed with suitable epoxy adhesive or high strength construction compound agent and pointed with silicon pigment to match the shade of granite stone including grinding and polishing over & including suitable thickness of adhesive compound

M&L for hardcore of broken stone or boulders gauge n.exc 63mm, deposited spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface all as spesified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-40 Grade with glossy finish, grey cement and pigment complete all as specified and directed.

S& F sand filling under floor or in floor or paving, laid in including watering and consolidation true surface for laying paver block complete all as specified and directed.

S&F for Stainless steel LED Letter in any shade of letter height 450 mm and 50 mm wide letter complete all as specified and as directed.

Point wiring with 1100 volts grade PVC insulated FR -LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators One light point controlled by one switch.

All as per item No 27 but One socket outlet 6 amp controlled by one switch on indepdendent board.

S&F switch piano flush button single pole one way 6 amp complete.

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete.

S&F MCB distribution board SPN, 240 volts, 8ways,double door, powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.

Supply & fixing LED Post top Lantern light fitting of capacity 45 watts CCT 5700K made in die cast Aluminium bottom housing and spun Aluminium top reflector with decorative clear Acrilic diffucer including lamp of 45 watt and IP-65 protection completed all as specified and directed.

S&F LED batten (1.2 m) made of CRCA sheet housing with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete.

Supply and fixing LED flood light 100 watt 230 Volt AC out door type with terminal management in multiple optics and equipped with impact and corrosion resistant complete with driver & lamp

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs Single pole 6 to 32 amp.

All as per itme No 36 but MCB of 'C' series Single pole and neutral (SPN) 40 amp.

M&L earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x6.0mm thick buried directly under ground vertically to a depth not less than 2.25 meter below ground level with top edge of the plate at a depth not less than 1.5m below ground level connected to and including galvanized iron wire 4.0mm not exceeding 7.5meters for each earth without protection pipe, including test point by means of bolts, nuts, check nuts, and washers made out of GI all as shown on plate No 5 of SSR Part I to the extent applicable to this item including necessary making PCC pit of size 0.3 m x 0.3 m x 0.3 m (inner size) in mix 1:3:6 type C1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 6 mm dia MS bars 3 Nos both ways with lifting hook made out of 6 mm dia bar and testing on completion to achieve value complete all as specified and directed.

Supplying, laying or fixing or passing through pipe, testing and commissioning 1100 volts grade XLPE insulated and PVC sheathed steel tape / wire armoured solid aluminium conductor cable of nominal cross sectional area 10 sqmm 4 core complete.

Excavation in soft / loose soil in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out complete.

M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.

Supplying and laying un reinforced precast concrete cable cover class LV type 1 with flat size 250x150x40 mm complete all as directed at site. Make Mehtab or Equivalent.

M/S RAKESH TRADERS (BID ID -3498695)

MODI CORPORATION (BID ID -3492355)

DEEPAK JAISWAL (BID ID -3492201)

M/S Shanti Enterprises (BID ID -3492575)