Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.6 LAccepted-AOC | ₹18.6 L Quoted ₹18.9 L | L1 | Accepted-AOC Lowest bidder |
| 2 | L2₹20.0 LRejected-Finance | ₹20.0 L | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| 3 | L3₹22.0 LRejected-Finance | ₹22.0 L | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| 4 | L4₹24.3 LRejected-Finance | ₹24.3 L | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| 5 | L5₹25.1 LRejected-Finance 146 D POCKET B MAYUR VIHAR PHASE II DELHI 110091 EAST DELHI 110091 | EAST | DELHI | 110091 | ₹25.1 L | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
| Sl No | Description | Qty | Unit | M/S Shesh Paul Gupta L3 | AKSHAY CONSTRUCTION COMPANY L5 | BR CONSTRUCTIONS L6 | M/S MOHAN LAL SHARMA L2 | CCC (CHOUDHARY CONSTRUCTION COMPANY) L4 | M/S ROMESH KUMAR SHAN L1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of brick/stone masonry built in cement mortar and remove the site complete all as specified and directed. | 7 | Cum | 200 ₹1,400 | 100 ₹700 | 120 ₹840 | 80 ₹560 | 542 ₹3,794 | 50 ₹350 |
| 2.00 | Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and removing demolished material to a distance and depositing to the distance exceeding 50 metres but not exceeding 100 mitres where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge. | 65.25 | Cum | 250 ₹16,312.50 | 100 ₹6,525 | 120 ₹7,830 | 72 ₹4,698 | 672 ₹43,848 | 50 ₹3,262.50 |
| 3.00 | Demolition of reinforced cement concrete in any position not otherwise specifically provided, complete all as specified and directed . | 3.5 | Cum | 300 ₹1,050 | 50 ₹175 | 150 ₹525 | 80 ₹280 | 752 ₹2,632 | 50 ₹175 |
| 4.00 | Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified and directed by Engineer-in-Charge. | 4 | Cum | 6,000 ₹24,000 | 4,000 ₹16,000 | 8,000 ₹32,000 | 5,000 ₹20,000 | 4,802 ₹19,208 | 4,600 ₹18,400 |
| 5.00 | Brick work Except bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified and directed by Engineer-in-Charge. | 3 | Cum | 1,500 ₹4,500 | 2,000 ₹6,000 | 4,000 ₹12,000 | 2,400 ₹7,200 | 2,202 ₹6,606 | 1,000 ₹3,000 |
| 6.00 | M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for slabs supported on wall, beams and columns, in floor, roofs, landings, balconies, canopies, deck slabs and in shelves and the like ,complete all as specified and directed
Note : Reinforcement shall be measured and paid for separately. | 0.5 | Cum | 6,000 ₹3,000 | 5,000 ₹2,500 | 6,000 ₹3,000 | 5,200 ₹2,600 | 5,802 ₹2,901 | 6,000 ₹3,000 |
| 7.00 | M&L for Steel reinforcement 10mm dia and over, TMT bars, cut to length, bent to shape required including, cranking, bending, spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed . | 60 | Kg | 90 ₹5,400 | 95 ₹5,700 | 82 ₹4,920 | 70 ₹4,200 | 82 ₹4,920 | 90 ₹5,400 |
| 8.00 | M&L for steel reinforcement 6 to 8mm dia and over, TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed . | 120 | Kgs | 90 ₹10,800 | 95 ₹11,400 | 82 ₹9,840 | 70 ₹8,400 | 82 ₹9,840 | 85 ₹10,200 |
| 9.00 | Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete including removal all debries exceeding 50m but not exceeding 100m all as specified and directed by Engineer-in-Charge. | 90 | Sqm | 30 ₹2,700 | 40 ₹3,600 | 13 ₹1,170 | 10 ₹900 | 42 ₹3,780 | 5 ₹450 |
| 10.00 | Rendering 10mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar 1:6, complete all as specified and directed by Engr-in-charge. | 75 | Sqm | 200 ₹15,000 | 130 ₹9,750 | 210 ₹15,750 | 140 ₹10,500 | 172 ₹12,900 | 110 ₹8,250 |
Updated dates
Tender Value
₹39.1 L
EMD Value
₹78,300
Closing Date
19 Dec 2025, 6:00 pmClosed
GE AF Jammu
GE AF Jammu
REPAIR REPLACEMENT TO FLOOR KOTA STONE WORK FOR STAIR CASE AND SUNKEN FLOOR PORCH WITH CONNECTED ALL FITTING ETC IN PCDA ARMY OTM and MD QUARTERS UNDER GE AF JAMMU
2025_MES_740951_1
CA NO GE/AFJ-62/2025-26
Open Tender
Civil Works
180 days
JAMMU
pls refer tender document
8 documents required · 8 mandatory
₹500
GE AF JAMMU
₹78,300
Yes
15 Jun 2026
21 Nov 2025
26 Dec 2025
21 Nov 2025
19 Dec 2025
5 Dec 2025
Amount
Demolition of brick/stone masonry built in cement mortar and remove the site complete all as specified and directed.
Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and removing demolished material to a distance and depositing to the distance exceeding 50 metres but not exceeding 100 mitres where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.
Demolition of reinforced cement concrete in any position not otherwise specifically provided, complete all as specified and directed .
Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified and directed by Engineer-in-Charge.
Brick work Except bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified and directed by Engineer-in-Charge.
M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for slabs supported on wall, beams and columns, in floor, roofs, landings, balconies, canopies, deck slabs and in shelves and the like ,complete all as specified and directed Note : Reinforcement shall be measured and paid for separately.
M&L for Steel reinforcement 10mm dia and over, TMT bars, cut to length, bent to shape required including, cranking, bending, spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed .
M&L for steel reinforcement 6 to 8mm dia and over, TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed .
Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete including removal all debries exceeding 50m but not exceeding 100m all as specified and directed by Engineer-in-Charge.
Rendering 10mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar 1:6, complete all as specified and directed by Engr-in-charge.
Rendering 15mm thick of brick work or concrete surfaces, other than fair face (without using extra cement) on walls in cement mortar 1:4 including WPC complete all as specified and directed by Engr-in-charge. Note: Supply only liquid water proofing admixture shall be measured and paid seperately
Rendering 5mm thick on fair faces on concrete surfaces/ ceiling, finished even and smooth (without using extra cement) on walls in cement mortar 1:3, complete all as specified and directed by Engr-in-charge.
Supply only Liquid Water Proofing admixture complete all as specified and directed by Engineer-in-Charge.
M & L for prepration of new plastered surfaces and applying three coat of lime white wash on ceiling, all as specified.
M & L for prepration of new plastered surfaces and applying two coat of approved shade of oil emulsion distemper on walls all as specified and directed.
M&L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specifiedand directed by Engg-in Charge.
Complete removal of wall and ceiling exisiting treatment and applying 1mm coat of plater of paris(putty) one cote of Acrylic Smooth exterior paint @ .835 ltr/10 sq of required shade over one coat of primer m complete all as specifiedand directed by Engg-in Charge.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates as in plinth protection laid in alternate bays finished even and smooth without using extra cement complete all as specified.
Providing precast cement concrete for kerbs stone of PCC 1:2:4 Type B-1 20mm graded aggregate (of any section indicated), with plain fair faces, including chamfers, weathering's, throat- ing etc. and set & jointed in CM 1:4 complete all as specified.
Cement concrete, type B-1 (1:2:4), using 20 mm graded stone aggregates as in lintels up to 1.5 metre clear span, bed blocks, copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete all as specified.
M & L 75mm thick Plain cement concrete (1:3:6 )ypeC-1 using 20mm graded stone aggregate as in fsub floor ,sabe base floor and paving etc complete all as specified.
M & L 25mm th PCC 1:2:4 type B-1 (using 20mm graded sone Agg) as in sub base, Floors, Paving complete all as specified.
M&L chequered cement concrete coloured tiles machine pressed conforming to IS 13801:1993 and ISI marked, size not less than 300mm x 300mm (Approx), thickness 25mm, as in floor, paving set and jointed in neat cement to match with gray pigment all as specified and directed.
M&L for 20 mm thck Sand filling under floors or in foundations including watering and consolidation Complete all as specified.
M&L for 60 mm thick interlocking machine pressed precast concrete interlocking paver block any shape, any colour and rubber finished type confirming to IS 15658-2006, M-35 grade laid and jointed in neat cement slurry with grey cement and pigment laid complete all as specified and directed.
M&L15 mm thick screed bed or bedding layer in CM 1:6 finished fair and even for laying floor finishes/tiles etc complete all as specified and directed by Engineer-in-Charge.
M&L for non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Square metre but not exceeding 0.11 Square metre, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles lcomplete all as specfied and directed.
M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.11 Square metre but n exc 0.18 Square metre in floors etc set and jointed in neat cement slurry and pointed in colored complete all as specified and directed.
M & L Glazed ceramic tiles coloured (350x250x7mm/ 450x350x7mm) for works on vertical surfaces such as skirting/dados of economy class B-III conforming to IS-13712 etc set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10 mm thick in cement mortar 1:3, as in backing layer without using extra cement complete all as specified. Note: Wall tiles will be fixed with digital pattren match with floor Without any extra chagre.
M&L for Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in dark shed cement to matchcomplete all as specified.
M & L vitrified tiles for works on vertical surfaces such as skirting/dados of economy class B-III conforming to IS-13712 etc set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10 mm thick in cement mortar 1:3, as in backing layer without using extra cement complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L for Granite work 18-20mm thick (Table rubbed and polished) in cooking platforms, walls & gate up to 10 mtr height etc over 10mm thick screed bed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with old surfaces or shede complete all as per specified and as directed.
M&L marble work (makrana white) 18-20mm thick (table rubbed and polished ) set in CM 1:2 for border with match of laying floor finishes all as specified
M/L machine cut Kota stone with 150mm borders of marble work ( makrana white ) slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete. Note : Marble makran white masured and paid saparatly.
M/L machine cut Kota stone slab 18 to 20 mm thick in riser of steps , skirting , dado and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
S&F for in Repair rain water pipe 110mm dia with single socket joints fixed to wall with stack clamp fixed in repair (work commence hight upto 30 mtr) complete all as specified and directed by Engineer-in-Charge
S & F PVC (SWR) pipes 75mm single socketed , in any length with rubber ring joints fixed to walls
S & F PVC (SWR) door bends of any radius bore of pipe 75 mm
S&F for in Repair PVC rain water pipe bend & shoes etc for 110mm dia pipe fixed in repair complete all as specified and directed.
Taking up or down steel tubing for 15mm dia pipe and connections including cleaning for re-fixing or removal to store.all as spd and directed by Engg-in-Charge
M&L for 15mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified.
Re fixing only 15mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified.
Taking up or down steel tubing for 20mm dia pipe and connections including cleaning for re-fixing or removal to store.all as spd and directed by Engg-in-Charge
M&L for 20mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified and dirceted.
Re fixing only 20mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floor complete all as specified and dirceted.
Vitreous china water closet, 'Orissa' pattern, including lime concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap, anti syphonage pipe etc. complete fixed in repairs, complete all as specified and as directed by Engr-in-Charge.
Supply & fixing in repair PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.
S & F for viterous china wash down water close (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steels chromium plated or aluminium hinging device and connecting to 'P' or 'S' incl flush pipe 32mm dia connecting with flushing rim all as specified
S& F PVC connections 15 mm size with PTMT nuts of length 600 mm, fixed in repairs, complete all as specified and diected by Engr-in-charge.
S&F in repairs CP grating 100mm dia as suitable to existing trap as per requirement all as spd and directed by Engg-in-Charge
S&F in repairs Angle valve cast copper alloy chromium Plated (CP) 15mm dia screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed complete all as specified and dirceted.
Removing demolished material to a distance and depositing out site of AF station Where directed at a level exceeding 1.5 KM or away form the campus which will be required above the starting point, complete all as specified and directed by Engineer-in-Charge Not All Matrial away from the Station as per Dirction By GE..
Taking down cement plaster up to 4th storey bldg ht.on Brick/stone walls and raking out joints, hacking for key, scrubbing down with water built in cement mortar.
M&L for rendering 15mm thick in CM 1:4 on other then fair face of brick work or over roof concrete surfaces mixed with integral water proofing compound finished even & smooth without using extra cement up to 4th storey bldg ht. Note : WPC shall be measured & paid seperately.
Material and labour for 10 mm rendering in CM 1:4 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified as directed by Engineer-in-Charge.
M&L for making good the surfaces of chajja/Facia/ roof projection etc visible with reinforcement or not by providing PCC 1:2:4 type B-0, including one coat of bounding agent on rusted reinforcment and necessary formwork scaffolding required (hight of builing up to 4th storey) complete all as specified and directed by Engr-in-charge.
M&L for repairing of chajja, concrete floor , balconies by providing and applying of water proofing of 3 coats pidicrete URP with Fibre cloth (Make Pedilite) and 2 coat of membrane of star chemicals in cement mortar as per manufactural instruction and directed by Engr-in-charge. Including cleaning the concrete surface with wire brush or scruber to remove dirt and loose particals and repair concrete portion and priming of concrete suface by using above material.
RCC 1:2:4 type B-0(12.50 mm graded stone agg) as in shelves, facia beams ,chajjs and similar suspended work including necessary form work , scaffoholding upto 4th storey ht. of bldg etc complete.
Rendering 15mm thick in CM (1:3) on sunken concrete floor surfaces mixed with integral water proofing compound finished even & smooth with using extra cement. Note : WPC shall be measured & paid seperately
Supply only integral water proofing compound ISI marked
M& L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces
M & L for APP polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.
M & L Plain cement concrete (1:5:10 ypeE-2 using 40mm graded stone aggregate as in foundation filling and mass concrete in sunken floors all as specified.
S&F GI Tubing medium grade 40 mm dia in floor etc completeall as specified
S&F in repair for flush pipe of polytethylene of low or high density or PVC, 32mm dia for low level cistern to maintain the desired height in between cistern to Water closet complete all as sepcified.
S&F Viterous china wash basin, white flat back size 550 x 400mm including waste coupling CP 32mm dia and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP grating with holes fixed in repairs complete, all as specified and as directed by Engr-in-Charge.
S&F 15mm bore pillar tap fancy type (Swan neak) cast copper alloy chromium plated screwed downhigh pressure, with or without lettered 'hot or cold' with long screwed shanks and fly-nuts screwed for iron pipe, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
S&F in repair 15mm dia Bib Taps, fancy type long body chromium plated cast copper alloy with crutch or butterfly handle complete all as specified and directed.
S&F 15mm concealed but fancy type Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fix in repair comlete all as specified and directed.
S&F 15mm fancy type Stop valves or angle valve,, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fix in repair comlete all as specified and directed.
S&F in repair PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all respect as specified GE.
S&F in repair plastic seat cover any colour suitable for water closet pedestal pan, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges devices complete all as specified and directed.
S&F in repair jet includnig all necessary items Complete all as specified
Toilet paper holder of fixed to walls with chromium plated (CP) brass screws Complete all as specified.
Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. Complete all as specified
Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified.
S & F PVC (SWR) pipes single socketed in any length with rubber ring joints in trenches bore of pipe 110 mm with PVC clamps and saddles complete all as specified.
S & F PVC (SWR) pipes single socketed in any length with rubber ring joints trenches bore of pipe 75 mm with PVC clamps and saddles complete all as specified.
S & F PVC (SWR) pipes 110mm single socketed , in any length with rubber ring joints fixed to walls complete all as specified.
S & F PVC (SWR) pipes 75mm single socketed , in any length with rubber ring joints fixed to walls complete all as specified.
S & F in repairs stack clamp cut of 50 x 5mm flat iron and 16mm dia round iron stays including bolt and nuts and securing ends of stay to water pipes suitable for 100 mm dia pipe including taking down unservicable clamp all as spd and directed by Engg-in-Charge
S & F PVC (SWR) door bends of any radius bore of pipe 110 mm complete all as specified.
S & F PVC (SWR) door bends of any radius bore of pipe 75 mm complete all as specified.
S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm complete all as specified.
S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm complete all as specified.
S & F 110mm bore PVC (SWR) vent cowl complete all as specified.
S & F 75mm bore PVC (SWR) vent cowl complete all as specified.
PVC (SWR) branch piece (single Y) equal or unequal 110mm bore complete all as specified.
PVC (SWR) 75mm floor trap , plain with grating including jointing with solvent cement.
PVC (SWR) reducers 110mm bore complete all as specified.
Dismantaling of wrought iron or mild steel work of any description not otherwise provided for framed work etc coplete all as directed.
S&F framed work as in gates of angle or other section with gusset plates,rails,braces etc complete drilled for fixing of steel sheeting or other coverings.etc fastening and fixing complete. FE-410W
S&F mild steel rolled ection in roof trusses (framed) trussed purlins,crane, gantries ,rails and fasterings and heavy bracket framing (Beam ,tee,angle channel or flat sections) including distance pieces,cleats etc confarming to Fe-410-W(Gde E-250) all as specified and directed.
M&L preparation on new steel surfaces of any description exc10cm width or girth including preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.
Preparation and scraping down of old surfaces of walls with mechanical/ manually (brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots) and after washing rubbing down the distemper etc and applying one coat oil emulsion distemper white or any tinted on walls, and filling gaps with 1mm thick putty the surface shall be even and smooth free from any undulation as directed by engr in charge.
Preparation of old decorated surfaces of steel or iron works of any description exc 10 cm over width or girth and applying one coat of synthetic enamel paint, manual or mechenical spayer which are required complete all as specified and directed by Engr-in-charge.
Complete removal of exisiting treatment and applying two Coats of distempering with oil emulsion distemper white or any tinted on walls, normal or camoufage pattern filling gaps by putty after washing rubbing down and stopping of distermpered surfaces, complete all as specified and directed by Engr-in-charge.
Preparation of newly plastered surfaces two Coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a complete all as specified and directed by Engr-in-charge.
Providing and applying plaster of paris putty of 1mm thickness over plastered surface to prepare the surface even and smooth complete all as specified.
Note: 1-All the arrangements scaffolding ladder saftey harness etc will be made by contractore free of cast & dipartment will have no role in this Arrangements but work execute as per dirction by Engr-in Charge and Approved by GE. And the work will be done proper manner & floor height of floor is upto to 15Mtr. 2-Sample approval has to be taken before starting the work and matrials has to be kept in store. 3. In Complete removal or second coats case - 2nd Coat paint will be applied after 8 hours of completion of 1st coat painting or after the surface gets dried) 4- Any Misc items reqd viz. colours, putty, Machenically Equipment which are required on ground etc in the work should be deemed incl in the respective items of works and nothing extra shall be paid on the account.
SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.
M/S MOHAN LAL SHARMA (BID ID -3495783)
M/S Shesh Paul Gupta (BID ID -3494729)
CCC (CHOUDHARY CONSTRUCTION COMPANY) (BID ID -3495245)
AKSHAY CONSTRUCTION COMPANY (BID ID -3495036)
BR CONSTRUCTIONS (BID ID -3498179)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
tender62.pdf
Tender Documents • 1.65 MB
BOQ_829689.xls
BOQ • 0.88 MB
Download all tender documents and submit your bid