54/MID/AN

Design, manufacture, supply installation, testing & Commissioning of gantry with 3 Ton Chain pulley Block with accessories for extraction of Foot valves at LIS Manwa The job involved laying RCC Concrete blocks 2 Nos. of Size (1m x 1m) adjacent to the suction pipes for anchoring of vertical square sections. Laying of one layer of 1:4:8 concrete mass, 4 ft depth, providing and laying of M.S angle 50x50x6mm. Providing and fitting of suitable no of vertical TMT steel members provided all along the blocks and cement concrete properly grouted in the blocks with complete curing. Fabrication of 2 Nos. 10 ft height vertical square section of size (0.25m x 0.25m) out of M.S angles of 50x50x6mm size at the base for erection of the square sections at site of LIS .Erection of the 2 nos. Square sections by anchoring them in the RCC. The job involves providing and fitting of ISMB 200 of length 15 ft and welding it on the top of two square sections by lifting and placing it on sections. Job also involves providing and fitting of 3Ton chain pulley block along with horizontal movement mechanism on the overhead gantry, testing and commissioning. The job include the cost of material, labour charges for fabrication of overhead gantry and welding set & Oxy-acetylene gas equipments, transportation charges, skilled/semiskilled labour charges at the site of installation. Complete Job

Fabrication and installation of M.S. Staircase 25 feet long 2.5 feet wide with working platform [2.5 feet long, 2.5 feet wide] from 40mm dia. M.S Pipe for railing and 40×6mm M.S flat for working platform and MS angle iron 40x40x6mm & M.S channel 75x40mm at site. The staircase has steps of size 2.5feet long with rise 10 inch and tread 10 inch. The staircase should be properly fixed by way of welding of suitable nos. of M.S legs grouted in cement concrete along the side of bank of river and required nos. M.S angle iron posts for proper clamping of railing on both sides with suitable nos. of M.S. angle iron and M.S. iron flat supports for M.S. stair case for its proper fixing. The job include cost of material, labour charges and painting charges by applying one coat of red oxide and two coats of black enamel for its longevity and smooth finish. Job also included all types of carriage charges of material and tools tackles to site and outstation charges etc. Complete job .

Electrification of pump room building at L.I.S by way of using standard quality material as per site requirement for lighting circuits, heating circuits and by providing and fitting of light points with LED bulbs., conduit pipes , P.V.C. Copper Cable of suitable sizes, Plastic P.V.C. pipes, wooden boxes/Iron boxes, Bakelite sheets, Switches, Junction boxes, Hooks, Bends, Steel wire, Service lines etc The job also includes Job includes the carriage charges of all the material, hire charges of tools & tackles, skilled & unskilled labour charges, cost of material for complete electrification of pump house at L.I.S. Complete Job

NATIONAL ELECTRO-MECH COMPANY

M/S K S ENGG WORKS