Supply of Spares of coal mills (HP-1103) to RGTPP Khedar Hisar on annual rate contract basis.

Supply of Spares of coal mills (HP-1103) to RGTPP Khedar Hisar on annual rate contract basis

Journal Housing Seal Cover for Journal Assembly of Coal Mill MOC: IS1020 Cast Steel/ EN-24

Journal Housing Liner Upper, MOC: Cast Steel as per IS 1030 Grade-2

Journal Housing Liner Lower, MOC- SS-304

Scrapper With Liner Plate Long, MOC: IS 1030, Gr-II, (Cast Steel) MOC of liner: ISS 276 ASTM Grade-3

Scrapper With Liner Plate, Short, MOC:IS 1030, Gr-II, (Cast Steel) MOC of liner: ISS 276 ASTM Grade-3

Feeder Outlet gate without actuator

Roller Liner Device For Coal Mill

Ventury For Coal Mill

Ventury Vane for Coal Mill, hardness 60 to 62 HRC, Thickness-15mm, (1set= 4 Nos.)

Air Restriction Ring Large Size (Length Approx. 1800mm, Width 60mm, Thickness 28mm) (1 Set=8 Nos.)

Air Restriction Ring Small Size (Length Approx. 1800mm, Width 35mm, Thickness 28mm) (1 Set= 8 Nos.)

Mill Body Deflector Support Plate MS, (1 Set= 3 Nos.)

Metallic Expansion Bellow For PF Piping, 2 nos. Congulation, SS 304, 2 mm Thick, OD: 710 mm

Dresser Coupling For center feed pipe of Coal Mill

Eccentric Bearing Housing For RC Feeder

Bearing Housing For RC Feeder and Coal Mill GT1651907

Bearing Housing Left For RC Feeder Model: CS2036GT1630407

Bearing Housing Right For RC Feeder Model: CS2036GT1630607

Clean Out Conveyor Chain with Scrapper, MOC: Cast Alloy steel, Pin: En-08, (1 Set= 82 Pieces), 72 Chain links and 10 Chain scrapper

Screw Stem for Belt Tightening, MOC- SS-316

Idler Roller for RC Feeder Model:CS2036, (1 Set=12 Nos.)

Bushing For RC Feeder and Coal MillGT1651807

Bearing Housing Assembly & Rode Housing Assembly For RC Feeder and Coal MillGT1632107

Seals of hot shut off gate- L2000 mm, Width 115mm, Thickness-1.5mm, MOC-SS-304

Seals of hot shut off gate-L1800mm, Width 115mm, Thickness-1.5mm, MOC-SS-304

Multiport Outlet (MPO) For Coal Mill Ceramic tile from inside. MOC- MS, Specification of ceramic tile: Thickness-12 mm, weldable with plug, Alumina content more than 90%, Hardness more than 8 on MOH's scale, colour-white, bulk density more than tha 3.2 gm/cc, water absorption less than 0.5%, cold cushing strength more than 3000kg/cm2, flexural strength(at room temperature) more 2200kg/cm2, flow medium is pulverized coal mixture

Feeder Outlet Hopper of RC Feeder

Skirt Assembly, (1 Set = 4 Nos. )

Shroud Plate 1360x120x10 mm MOC- MS (1 Set = 8 nos.)

Wearable adjustable shrink (adjustable orifice) spares for coal mill (HP-1103), Coal pipe, OD-710 mm, Model-SMK Type SB

Three Dimensional Wearable Elbow No. 29 (Drawing No. 50-F288S-J0502-37)

Vane Wheel Segment for Coal Mill (HP-1103) (1 set = 8 nos.)

Mill Bowl Hub Clamping Ring MOC - 16 Mn (1 set = 4 nos.)

Cover for Hot Air Diaphragm, MOC- Aluminium

Coupling for Cleanout Conveyor for RC Feeder

Roller Retainer Ring for Coal Mills for RC Feeder

MULTIMELT STEELS PVT LIMITED

RAJU ENGINEERING WORKS PRIVATE LIMITED

UNITECH ENGINEERS

Shiv Shakti Engineering Works