C/o Forest Guard hut Gazta under kotkhai Range

Amount

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and sapling of girth up to

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

Earth work in excavated by mechanical means (Hydraulic excavator)/ manual , means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – all work up to plinth level:

Random rubble masonry with hard stone to foundation and plinth including leveling up with cement concrete 1:6:12 ( 1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with i/c dressing of stone:

Providing and laying cement concrete in retaining walls, return walls , walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses , parapets, coping, bed blocks , anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of entering, shuttering and finishing:

Centering and shuttering including strutting, propping etc. and removal of from for :

Proving and laying in position specific grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement – All type of work.

Rein- forcement for R.C.C work I/c bending & binding placing I position complete upto floor two level. Mild steel /tor steels @100kgm3

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Half brick masonry with common burnt clay F.P.S.(non- modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Providing wood wood work in frame of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.

Providing and fixing insulating board ceiling of approved quality with necessary lining, nails etc. complete ( frame work to be paid separately)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing 1 mm thick M.Ss sheet eveas board/projection ceiling with frame of 40x40x6 mm angle iron and at the junctions and corners, all necessary fitting complete, including applying a priming coat of approved steel primer.

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal/vertical or curved surfaces), excluding cutting to size and shape wherever required.

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and itumen washers complete.

Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I limpet and bitumen washers complete: washers complete.

Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3 mm size , bolts , nuts and washers etc. including making necessary connections with rain water pipes complete.

Providing and fixing unplasticised –PVC pipe clips of approved design to unplasticised – PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S screws of required length, including cutting brick work and fixing in cement :4 coarse sand) and making good the well etc. complete.

Providing wood work I frames of doors, window, clerestory window and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length.

Providing and fixing paneled or paneled and glazed shutters for doors, window and clerestory windows fixing with butt hinges of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer-incharge.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire if dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws:

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Providing and fixing aluminum sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with necessary screws etc.

Providing and fixing aluminum tower bolts, ISI marked, anodized, (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Providing and fixing aluminum handles, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

Fixing hydraulic door closer all kind. Wire gauge D

Fixing of M.S. hooks and eyes.

15 mm cement plaster on rough & fair side of single or half brick wall of mix:

Cement concrete flooring 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate) finishing with a floating coat of neat cement, including cement slurry, but excluding the cost of noising of steps etc. complete.

Providing and laying ceramic glazed floor tiles of sizes 300x3000 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved ,make in colour such as white, Ivory, Grey, Fume red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand), Joining with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete.

White glazed tiles 6 mm thick in skirting and risers of steps and dado on 12mm(1/2”) thick cement mortar 1:3 & joined with white cement slurry.

Making plinth protection 50mm thick of cement concrete 1:3:6 ( 1 cement: 3 coarse sand ( zone –III) : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with find sand, including necessary excavation, leveling & dressing & finishing the top smooth.

Construction of open surface drain in H.D.C.R. stone masonry 15x23 cm U shape in cement mortar 1:6 and inside plastering 20 cm thick with cement mortar 1:3 i/c earth work and laying 10 cm thick cement concrete 1:5:10 and 7.5cm thick cement concrete 1:2:4 i/c 20 cm thick cement plaster 1:3 and finished with floating coat of neat cement.

Painting steel work with deluxe multi surface paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.

With ready mix pink or grey primer of approved brand and manufacture on wood work ( hard and soft wood)

Painting wood work with deluxe Multi surface paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer @ 0.75 ltr/10 sqm of approved brand and manufacture

Distempering with oil bound distemper washable interior & exterior weather proof cement paint of approved brand and manufacture to give an even shade.

Finishing walls with water proofing cement paint of required shade:

Providing and fixing white vitreous china pedestal type water closet ( European type W.C. pan) with seat and lid, 10 liter low level white P.V.C flushing cistern, including flush pipe, with manually controlled device ( handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

Providing and fixing wash basin with C.I brackets, 15 mm C.P. brass pillar taps , 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS :13983 with C.I. brackets and stainless steel plug 40mm, including painting of fitting and brackets, cutting and making good the walls wherever required :

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fitting.

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete:

Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S triangular plate to European type W.C. of quality and make as approved by Engineer-in-charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fitting complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete.

Providing and fixing toilet paper holder:

Providing and fixing soil, waste and vent pipes:

Providing and fixing soil, waste and vent pipes:

Providing and fixing bend M.S holder-bat clamps of approved design to sand cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix ( 1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc:

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 185.15 (100mm dia)

Providing and fixing plain bend of required degree

Providing and fixing heel rest sanitary bend ( 100 mm dia)

Providing and fixing single equal plain junction/invert branch of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete

Providing and fixing terminal guard : (100mm dia)

Providing and fixing collar:

Providing and fixing trap of self-cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:

Providing and fixing PTMT liquid soap dish/ container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fitting of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with bracket fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.

Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 ( 1 cement :4 coarse sand) for sluice valve, with C/I. surface box 100mm top diameter, 160mm bottom diameter and 108 mm deep ( inside) with chained lid and RCC top slab 1:2;$ mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement: 5 fine sand : 10 grated stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand ) 12mm thick, finished with a floating coat of neat cement complete as per standard design:

Providing and fixing G.I. pipes complete with G.I. fitting including trenching and refilling etc.External Work

Making connection of G.I. Distribution branch with G.I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. Complete.

Providing the and fixing G/I. pipes complete with G.I fitting and clamps, i/c cutting and making good the walls etc. Internal Work.

Providing and fixing brass bib cock of approved quality:

Providing and fixing C.P. brass stop cock ( concealed) of standard design and of approved make conforming to IS:8931.

Providing and fixing ball value ( brass) of approved

Providing and fixing uplasticised PVC connection pipe with brass unions:

Providing and fixing G.I. union in G.I. pipe including

Earth work in excavation by mechanicals means ( Hydraulic excavator) / manual means in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavation soil and disposal of surplus excavation soil as directed, within a lead of 50m.

Centering and shuttering including strutting, propping etc. and removal of form for:

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level:

Providing and laying in position specified grade of reinforced cement concrete. Excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level:

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Boulder filling dry hand packed tightly as in soling under floors

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in :

Half brick masonry with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in :

15 mm cement plaster on rough side of single or half brick wall of mix:

Cement concrete flooring 1:2:4 ( 1 cement ; 2 coarse sand:4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

HEM RAJ

HEM CHAND

Tulsi Ram Sharma

Pritam Thakur

ZAFIR HUSSAIND

NISHANT CHAUHAN CONTRACTOR

YOGESH THAKUR

SUSHIL SHARMA

rupinder justa govt contractor

Chauhan Contractors