CONSTRUCTION OF MT SHED, PROVN OF CHAIN LINK FENCING, REPLACEMENT OF ALUMINIUM DOORS AND WINDOW IN BLDG NO. 07, PROVN OF HARD STANDING WITH INTERLOCKING TILES FOR VEHICLE PARKING AND EXECUTION OF CERTAIN SANCTIONED MINOR WORKS AT NASIRABAD CANTT UNDE

Amount

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in hard/dense soil, complete all as specified

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out complete all as specified and as directed by the Engineer-in-Charge.

M & L for PCC 1:4:8 type D2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed by the Engineer-in-Charge.

M & L for RCC M-25 grade (Design mix) using 20mm graded aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams , and similar work, vertical or to batter, flat surfaces of concrete , surface is required to be fair finished complete all as specified and as directed by the Engineer-in-Charge

M & L for M-25 grade (Design mix) using 20mm graded aggregates as in columns, pillars, piers, posts and struts complete all as specified and as directed by the Engineer-in-Charge.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, rectangular or polygonal surfaces of concrete , surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge

M & L for RCC M-25 (Design mix) using 20mm graded aggregates as in Roof beams, lintel beams/bands, cantilevers, bressummers, lintels over 1.5m span, chajjas etc complete all as specified and as directed by the Engineer-in-Charge.

Formwork to sides and soffits of floor or roof beams, soffits of lintel beams/ bands, chajjas, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc., flat surfaces of concrete , surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge

M & L for RCC M-25 (Design mix) using 20mm graded aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), flat surfaces of concrete , surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail?ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon?tal or sloping and similar work complete all as specified and as directed by the Engineer-in-Charge

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge

All as per item No. 13 above but 6 to 8 mm dia bar.

M & L for mild steel TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge

Removal of excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil, complete all as specified

M & L for walling of random rubble, coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exc 20mm, lime or sand stone.

M & L for brickwork with subclass `B` fly ash bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge

M & L for brickwork with subclass `B` fly ash bricks, in straight or curved on plan, any radius, built in CM 1:6 complete all as specified and directed by the Engineer-in-Charge

M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work surfaces, finished even & smooth without using extra cement.

M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work surfaces, mixed with water proofing complound, finished even & smooth without using extra cement. Note: WPC shall be measured and paid separately.

Supply only Integral waterproofing compound, ISI marked.

M&L for 10mm thick rendering in cement mortar in CM (1:4) on ceiling, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of dry distemper over a coat of primer, complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer, complete all as specified and directed.

M & L for rolled mild steel work angle iron as in door frame (Chowkhats) including provn of 12 mm dia deformed bar welded horizontally to bottom of frame confirming to Fe-290 or Fe-330 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

S&F 35mm thick Second class HW factory made plained framed panelled shutters (Two panels) with lock rail and panel of 9mm BWP commercial plywood or 12mm veneered particle board with commercial veneering on both faces the size of rail and style as per IS-1003 (Part-I) , kilned seasoned and chemically pressure heated complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed..

M&L for prepartion of new or previously untreated wood and wood based surfaces of any description over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S & F steel window /ventilator factory made, made out of MS hollow section 79mmx39mmx1.6mm thick frame with double shutters (Glazed & wire gauge shutters) made out of 'Z' section using flush butt welding & tenon riveting all as per IS 1038 / 83, dobby hinges shall be provided to both shutters. Locking arrangements as per sample approved by GE, provided with knob, 10mm MS square bars in grills, 'Z' section handle 100mm sized & 150mm long hook & eye welded to frame & shutter, four nos lugs welded to frame including necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fasts and making good in PCC 1:2:4 type B-1 including preparation of surfaces & applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed.

S&F sheet glass , ordinary quality 3mm thick fixed with oil putty size of glass n exc 0.50 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with wire staples complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 150mm long of extruded section complete all as specified and directed.

S&F aluminium anodised handle 150mm long fabricated type complete all as specified and directed.

S&F MS butt hinges medium weight cold rolled ISI marked of size 100mm complete all as specified and directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

M&L for broken stone Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

M&L RCC M-25 (Design Mix) using 20mm graded crushed stone aggregate in Chajjas , complete all as specified and directed

Use & Waste of Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed

M & L for roof treatment with APP modified polymeric water proofing membrane, 2mm thick having centre core not less than 100 micron high molecular high density polyethylene film (HMHDPE) film protected from both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3 Kg / Sqm applied with bonding material using blown type bitumen conforming to IS-702 Grade 85/25 @ 1.20 Kg/ Sqm over bitumen primer conforming to IS- 3384 @ 0.40 Kg/ Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg/ Sqm over APP membrane with all overlaps complete all as specified and directed.

M & L for 40mm thick (average consolidated thickness) PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 0.60 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed.

M & L for machine cut kota stone slab as in shelving/ window cills or steps 20mm thick in single piece over 15mm thick screed bed CM (1:6) incl necessary bull nosing fixed to wall and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing on both face complete all as specified and as directed by the Engineer-in-Charge

M & L for 75mm thick cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate , as in sub base of floors, complete all as specified and as directed by the Engineer-in-Charge

M & L for machine cut kota stone slab flooring 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and incl cement screed base 15mm th in CM (1:6), complete all as specified and directed by the Engineer-in-Charge

M & L for kota stone slab 20 mm thick in riser, skirting, and pillar laid over & incl cement screed base 10mm thick in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & incl necessary bull nosing complete all as specified and as directed by the Engineer-in-Charge

M&L for factory made 60mm thick machine pressed precast cement concrete coloured, reflective type interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.

M & L for , Stone slab 25 mm to 35 mm thick dressed true and square, in one length not less than 60cm and n. exc 120cm in copings, window cills, chajjas, sunshades,Shelving etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed.

M&L for Stone kerb of roughly squared stones of size 20cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush complete all as specified and directed.

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specifed and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out in soft loose soil of soil returning, filling in and ramming earth in layers n.exc 25cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specifed and directed.

M&L for PCC in foundation as in kerbs of mud stops, rounded or chamfered on edges type C1 (1:3:6) using 20 mm graded aggregate including necessary form work etc complete all as specified and directed.

S&F mild steel work as in angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) and similar works conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

M&L for 5 to 10 mm dia mild steel screw bolts (Machine made) with hexoganal or suqare head at one end and screwed the other or screwed both ends each screwed and to be bolted wih washers and one hexoganal or suqare not exc 75mm long and dia of shank 5 to 10 mm including fixed with welding to angle complete all as specified and directed.

Supply only chain link MS galvnised medium coated as per IS 4826 fencing 50 x 50 mm mesh 3mm dia of wire complete all as specified and directed. Make :- TATA (Wiron) /JINDAL

Fixing only chain link fencing including line wires any mesh, size & type of standards, rails, straining bolts, etc including prvision of binding wire complete all as specified and directed.

Supply only 4mm dia galvnised medium coated steel wire cut to length as required for fixing chain link fencing etc complete all as specified and directed. (Note :-Fixing of Line wire is included in SI Item No 60)Make :- TATA (Wiron) /JINDAL

S & F Galvanised 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, includdigng, securing or tying at crossings with and provisiion of galavnised mild steel wire, staples or steel pins, etc as directed each line wire to measured complete all as specified and directed.Make :- TATA (Wiron) /JINDAL

M&L for preparing of steel & iron works treating ends of posts, backs of chowkats, etc, treated with tarred, area exc 0.10 sq m but n exc 0.5 sqm each complete all as specified and directed.

M&L for preparation of new steel & iron surfaces n.exc 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 15mm thick redering on brick work surfaces in CM 1:6 finished fair and even without using extra cement complete all as specified and directed

M&L for 15mm thick rendering on stone masonry surfaces in CM 1:4 finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new plaster surfaces applying three coats of lime/ white wash on wall surfaces complete all as specified and directed.

M&L for non skid ceramic coloured tiles 400x400x7 to 8mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles over and including 15mm thick screed bed in CM 1:6 over and including 25mm thick PCC 1:2:4 at B-0 (using 12.5mm graded stone aggregate ) complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300x450x7 to 8mm thick on vertical surfaces of wall such as skirting/ dados ect set and jonted in neat cement slurry and pointed in white cement to match the shade the tiles over and including 10mm thick screed plaster on stone/brick masonry walls in CM 1:4 complete all as specified and directed.

M&L for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet complete all as specified and directed.

M&L for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face,supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F Aluminium butt hinges medium weight cold rolled ISI marked of size 100mm complete all as specified and directed.

S & F water tubing 15 mm bore, medium grade, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors

All as per srl item 73.00 above but 20 mm bore pipe.

S & F water tubing 25 mm bore, medium weight, ISI marked galvanized with all fittings and laid in trenches/ floors .

S & F water tubing 25 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors

S & F Gun-metal, globe or gate valves,20 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by engr in charge.

Cutting existing steel tubing for addition and alteration, screwing the existing steel tubing in position and insertion of required size of GI fittings. (i.e. union, nipple,reducing tee) for branch connection of internal dia 20/25 mm dia.

S&F PVC floor trap with grating 75mm dia fixed with cement joint complete all as specified and directed.

S&F PVC (SWR) 110mm pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) 75mm pipes, single socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified and directed.

S&F PVC 110mm (SWR) vent cowl complete all as specified and directed.

S&F PVC 110mm (SWR) junction single,(Single T) equal or unequal provided with access door ,complete all as specified and directed.

S&F PVC 110 mm (SWR) bends any radius PVC (SWR) bends any radius, provided with access door ,complete all as specified and directed.

S&F PVC 75 mm (SWR) bends any radius PVC (SWR) bends any radius, provided with access door ,complete all as specified and directed.

S&F tubular towel rail aluminium anodised 20mm dia 'D' type 60cm long between flanges complete all as specified & directed.

S&F Chromium plated fancy type bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.

S&F vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe, antisyphonage pipe, including making, etc complete including making goood to floor etc complete all as specified and as directed.

S&F PVC valveless low level fluslhing cistern 10 litre capacity with white inlet,float valve,handle including pvc 32mm bore flush pipe fixed on wall and connections to pipes and fixing of chain and pull, or lever, complete all as specified & directed.

S & F of vitreous China urinal, flat back, half stall type white/ ivory colour with grating and Union for discharge pipe. Including connection to flushing pipe and outgoing waste pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F plastic water closet seat cover any colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete as specified and directed.

S & F Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F Pillar taps fancy type,15mm cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed, complete all as specified & directed.

S&F stop cock/angle cock 15 mm dia fancy type chromium plated with long shank and cup (concealed type), screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as spd & directed.

S&F Soap dish fancy type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as sped & directed.

S&F vitreous china wash hand basin white, flat back of size 550x400mm excl taps, and plug and porcelain stopper but incl brackets, PVC waste pipe & PVC waste coupling complete all as specified and directed.

S&F PVC connection, heavy duty 15 mm bore, 60 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed

S&F 500 Litre capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

S&F 2000 Litre capacity rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top), hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

S & F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gram) copmplete all as specified and directed.

Approved earth filling under floor including spreading levelling watering and well ramming in layers n exc 25 cm thick complete all as specified and directed

S & F sheet glass shelf assembly consisting of 5.5 mm thick glass shelf 12 cm wide with chromium plated brackets guard and railing 60 cm long complete all as specified and directed.

M & L for rolled mild steel work angle iron as in tank platform including welding horizontally to bottom of frame confirming to Fe-290 including applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

S&F PVC gully trap 110 mm outlet, including jointing to waste pipe fixed in cement concrete type B1(1:2:4) as directed by Engr in charge.

M & L for Concrete bed to drain pipes 150mm including packing under, and haunching against the sides of pipes after they are laid in PCC 1:4:8 type D-2 complete all as specified and directed.

M&L for 150mm bore salt glazed stone ware drain pipes laid in trenches and jointed as specified complete all as specified and directed.

M & L for cement concrete (Type B0, 1:2:4, 12.5 mm graded aggregate) in copings, kneelers, apex stones, bed plates, water troughts and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified & directed

M&L for 40mm thick PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in damp proof course on horizontal surface using water proofing compound including necessary formwork. Note : - Supply only water proofing compound shall be measured and paid for separately.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified.

S&F factory made steel ventilator with top hung shutter including hinges, steel peg stay, handle complete all as specified.

S&F vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified.

S&F brass chromium plated shower rose 100mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified.

S&F 15mm bore Stop valve, cast copper alloy, fancy type chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union complete all as specified.

M&L for 40mm thick sand stone slab set and jointed over joist etc in CM 1:4 as in base of water tank over and including 25mm thick PCC 1:2:4 type B0 (using 12.5 mm stone crushed aggregate) complete, all as directed.

M&L 40 mm thick sand stone slabs; set and jointed over joists etc. in CM 1:4 as in manhole cover complete all as specified and directed

S&F Septic tanks,LLDPE Septic tank designed to carry sewage and sludge water , excavation in any type of soil In PCC 1:4:8 below foundation ,vent shaft ,connection, etc., complete for 10 users all as specifie and directed..

M&L for construction of soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete of size 1.2 M dia X 3.0M deep complete all as specified and shown in drg No. CEBZ/TD/78/2011 Sheet 1/2 & 2/2.

Taking down( steel window) chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down (Wooden door & steel windows) chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors,windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paidfor separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as specified and directed.

S&F 5.5mm thick sheet glass ordinary quality and glazing in square, exc 0.5Sqm in each pane complete all as specified and directed.

M&L providing 50x50mm aluminium anodised grills mesh for fixing in wooden gauged door shutter weight not less than 1.2Kg/ Sqm complete all as specified and directed by Engr-in-Charge.

S & F Mild steel Mortice lock, vertical type, 4 levers size 100 mm complete all as specified and as approved by the GE.

S & F Door closer hydraulically regulated, designation No. 3, universal type, Aluminium extruded section body, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, all as specified and as approved by the GE.

M&L for Granite (of any type) work, 18-20 mm thk (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including making hole for gas pipe chamfered at end complete all as specified and directed.

M&L for 15mm thick Screed bed or beeding layer of mortar in CM 1:4 for laying floor finishes complete.

M & L for Preparation of new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including 1 mm wall care Putty complete all as specified and directed.

Complete removal of existing old wall surfaces and appling two coats of oil bound distemper over a coat of 1mm thick average thick wall putty, complete all as specified and directed.

M&L for precast concrete 1:3:6 type C1, using 20 mm graded crushed stone aggregate as in kerb stone set in cement mortar 1:6, including necessary earth work, excavation, complete, all as specified and directed.

M&L for preparation of new concrete surfaces of Kerb stone etc over 10cm in width or girth and applying two coats of synthetic enamel paint, alternate in black & white tint, all as specified & as directed.

S&F mild steel framed work as in doors / gates / steel frames / chowkats etc. of angle or other section with gusset plates, rails, braces, etc., complete conforming to Grade E-165 (Fe 290), drilled for fixing of steel sheeting or other covering including necessary welding etc and fixing in position complete.

M&L for 1.6 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc., complete, all as directed.

Sand filling under floor spreading and levelling in layers n exc 25 cm thick for well ramming watering required complete all as specified and directed .

M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size exceeding 0.11 Sqm but not excceding 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed.

S&F rigid PVC waste pipe of approved quality 32mm bore, 75mm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed.

S&F steel window / ventilator glazed and gauged (combination) with side hung / top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including guard bars and necessary cooler arrangement in window complete all as shown in drg No. CEBZ /TD / 14/11 Sheet No. 1/7 to 7/7 complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n. exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F 100mm butt hinges stainless steel with galvanised mild steel hinge pin anodised ISI marked and fixed, complete all as specified and directed.

S & F framed work as in tank plateform of approved pattern, of angle or other section conforming to Fe 290 Gde E-165 with gusset plateds, rail braces etc drilled for fixing of steel sheeting or other covering of doors etc to be prepared for hanging or slidingwith and ilncluding either hooking and hinges or steel hangingdoor fitting (excluding sheeting or othefr covering running rails and guiders) and hanging also fastening and fixing complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, stranded copper conductor single core FRLS cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box 1.2 mm thick with bakelite laminated sheet top cover 3 mm thick, brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with all accessories for:-

One light point controlled by one, one way switch.

One ceiling fan/exhaust fan point controlled by one, one way switch.

One three pin 5 Amp socket on same board with other switches.

One 3 pin 5 Amp socket on independent board.

All as per item No. 144.00 here-in-before but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLS) PVC insulated green in colour as continous earth conductor connected to common earth.

S&F switch piano flush type 5 amps, single pole one way 240 volts.

S&F switch piano flush type 15 amps, single pole one way 240 volts.

S&F Socket outlet 3 Pin 5/6 Amp flush type.

S&F socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type ISI marked complete.

S&F ceiling fan regulator electronic flush , steped (four step) 230 Volts AC.

S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm.

S&F LED tube light fitting in acrylic linear tube (1x 18 watt),230V for single LED tube light including 1 x 18 W LED retrofit bar professional CW 6500 K cover channel, bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make Havells Cat part NoPHOTONULTRA2.01212T8SSTL20WLED 865SPC (for tube) REGALBATTENT8UPTO1X22WDSBSWH (for batten)Bajaj Cat Part No BLRB 18W CWc for tube , BLRB - DB 118 for batten , or equivalent model of Philips/Crompton

S & F LED light fitting 1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make: Bajaj/Havells/CG

Supply, fixing, testing and commissioning energy saving street light luminaire 35 watt LED , pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete, IP 66 protection incl connecting with three core copper flexible wire from ceiling rose to connector of light fitting complete all as specified and directed by Engr-in-Charge. Make- Havells Cat Part No ENDURACITYLITEPLAT PLUSSL35WLED757SASYBOPC or equivalent model of Surya/Control& Switchgear/Bajaj

Supply and fixing street light bracket made of 32 mm GI pipe , 1.2 m lenght fixed with two nos of clamp , nut and bolts for fixing of street light complete all as specified and directed by Engr-in-Charge.

Supply & fixing ceiling fan 1200 mm sweep , 230 Volts, AC , 50 Hz, copper winded motor, BE star rated white colour complete with motor, blade set of three nos , down rod, canopy, shackle assy. Make: Havells/Bajaj/Crompton.

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 8 way, 240 volts suitable for housing MCB's including blanking plate complete all as specified and directed.

S & F MCB SP, 240 volt, 6 Amp to 40 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

S & F MCB SPN, 240 volt, 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

S & F MCB SPN, 240 volt, 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore GI med grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle all as specified and shown in elect plate No 3 of SSR Part-I of 2009.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame for suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for the following, complete all as specified and directed.

One light point controlled by one way 5 Amps SP switch

One exhaust fan point controlled by one, one way switch.

One 5 pin 5 Amps socket outlet on same board with other switch

All as per item No 166.00 above but with 2.5 Sqmm cross sectional area electric cable for 15 Amp socket outlet on independent board, complete all as specified and directed

S&F of modular switch 1 way 6/10 Amp , 1 module, complete all as specified and directed.

S&F of modular switch 1 way 16 Amp, 1 module, complete all as specified and directed.

S&F of modular socket 6Amp, 2/3 pin combined 2 module complete all as specified and directed.

S&F of mdoular socket 6Amp/16 Amp, 2/3 pin combined 2 module complete all as specified and directed.

S&F of lamp holder PVC/polycarbonate type with back plate complete all as specified and directed.

S&F LED mirror Light fitting, 1X 10 W, attractive wall/ceiling mounted type with mettalic channel and white reflector, suitable for mirror light fittings with complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable. Make: Bajaj/Havells/CG

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp and street light bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make- Havells/Surya/ Control& Switchgear/Bajaj

S&F of sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLS) copper conductor cable of size 6.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded copper conductor cable green colour as earth continuity conductor.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, 5 Star rated & Glass lined enamel coated incoloy heating element, Temperature indicating dial & Shock-resistant ABS outer body complete with all accessories such as safety valve, thermostate, NRV, connection piece etc Make: Bajaj, Havells, Usha

Supply and laying steel water tubing GI medium grade ISI marked with all fittings laid in trenches or fixed to wall etc complete for 15mm dia.

M&L for drilling and tapping cast iron water mains (in position) for branch connections of internal dia 15 mm

S&F stop valves 15mm cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F of LED lamp 9/11 watt complete all as specified and directed. Make: Havells/Bajaj/Crompton

S&F exhaust fans AC single phase 230V of size 300mm sweep with louver including connecting with three core flexible copper wire from ceiling rose to connector of fan complete all as specified and directed. Make: Bajaj/Havells/Usha

Supply, laying and testing of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2core.

Supply and fixing tubes light grade GI tubing 40 mm dia with all fitting laid in trenches, fixed on pole/on wall for cable protection.

Supply & spreading in trenches dry river sand cushioning to underground cable in trenches including spreading, levelling hand punning down complete all as specified and directed Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly.

M & L for laying of bricks locally available sub class 'B' bricks, non-modular sizes as per IS 1077: 1992 for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable all as directed.

Shree Sai Ram Enterprises

SHREE BALAJI TRADING CORPORATION

MAHARANI CONSTRUCTION