PROVN OF TRANSFORMER DIESEL GENERATOR SET WITH FOUNDATION AND ROOF AND 04 FIXED AIR COOLED SPLIT UNIT OF CAPACITY 1.5 TR AND PATH WAY FROM BLDG NO P04 TO P3 AND P1 TO ORS TOILET AT 151 INF BN TA JAT REAR AT MUZAFFARPUR UNDER GE DANAPUR

Amount

Supply , installed and commissioning of Factory assembled Silent DG set with AMF panel of capacity 62.5 KVA , 50 KW , 1500 RPM , Turbo Charged, water cooled comprising of 83 BHP Engine with microprocessor based Genset controller with silencer and canopy for soundles mode (sound level not exe level specified by contol pollution board) and alternator both mounted on a common base frame conforming to ISO-3046/BS-5514 and IS-10002 rated for 415 volts 50 cycles , 0.8 Power factor (PF) complete with residential silencer, AVM pads , battery with its leads, first fill of lub oil and all engine accessories such as self starter, alternator/dynomo with suitable coupling and base frame on foundation as recommended by the manufacture and consisting of other electrical component and maintenance free battery including suitable size of coppeer cable lead with teminal, all mounting accssory and AVM pads all as specified comprising with the following.

A. Engine :

Vertical multicylinder, cold starting in accordance with BS-5514/IS-10002 at 1500 PM including the following accessories :- (i) Fuel tank(Suitable for capacity for minimum 10 Hrs run). (ii) Fuel filter(Ore & Micro). (iii) Fuel feed pump(inline monoblock/PT type) with governor. (iv) Lub oil filter. (v) Lub oil cooler. (vi) Dry type /oil bathtype air cleaner. (vii) Exhaust Silencer(Industrial type). (viii) Radiator, Radiator fan & mounting. (ix) Fly wheel with starting ring. (x) Expansion bellow. (xi) Exhaust gas turbocharger. (xii) 12 Volt electric starter with 01 No maintenance free battery 180 AH capacity. (xiii) Battery charging alternator (xiv) Engine control panel consisting with ON/OFF Start Key,Lub oil pressure guage, Battery charging ammeter,Coolant temp gauge, RPM Meter etc. (xvi) Front & Rear engine mounting supports (AVM pads) (xv) Suitable flexible coupling

B. ALTERNATOR

(i) Alternator, 3 phase, 415 Volts, 50 Hzs, 0.8 PF, 1500 RPM self excited, self regulated screen, drip proof alternator of capacity 63 KVA conforming to BSS 5000 (part 99) with insulation class "H", single bearing and automatic voltage regulator accessories

C. ACOUSTIC ENCLOSURE

(i) Specially design to meet stringent MOEF/CPCB norms of 75 dBA @ 1 mtr at 75% load under free field conditions (ii) Air inlet louvers specially designed to operate at rated load even at 50 deg C air inlet temp. (iii) Powder coated for long lasting service life and superior finish. . (iv) Insulation material meets exacting IS 8183.

D. ACCESSORIES

(i) Suitable channel frame (ii) Storage battery of 1X12 Volts of suitable 180 AH capacity as per manufactures instruction mounted on angle iron frame of suitable size as directed.

E. CONTROL PANEL

(a) The control panel shall be made of CRCA sheet duly fabricated and powder coated and complete with internal wiring, bus bar etc and fitted with the following accessories :- (i) MCCB 4 Pole 160 Amps 36 KA Microprocessor release type – 01 No (ii) Digital Ammeter with CT of size 100/5A – 01 No (iii) Digital Voltmeter 3 Ph 415 volts – 01 No (iv) Microprocessor based DG set control unit with GSM SIM enable - 01 No (v) Indicating lamps (LED type) (R-Y-B) – 01 set

F. AMF PANEL

(a) The control panel shall be made of CRCA sheet duly fabricated and powder coated and complete with internal wiring, bus bar etc and fitted with the following accessories :- (i) MCCB 4 Pole 160 Amps 36 KA Microprocessor release type – 02 Nos (ii) Contactor 160 Amps, 4 POLE, 415 VOLTS -02 Nos (iii) Digital Ammeter with CT of size 100/5A – 02 Nos (iv) Digital Voltmeter 3 Ph 415 volts – 02 Nos (v) Indicating lamps (LED type) (R-Y-B) – 02 sets (vi) Relay, TIMER and other acessories as per manufacturer recommendation.

(i) Antivibration mounting pads to be incorported during installation. (ii) Cost of PCC foundation as per manufacturers recommendation included in the cost of Gen Set. (iii) Silencer pipe of engine is to be extended out of the building with suitable dia of GI medium grade pipe duly heat insulated with suitable asbestos rope duly claded with plaster of paris rate of which deemed to be included in the unit rate of Gen set. (iv) Lubricating oil shall be provided by the conractor cost of which deemed to be included in the unit rate of DG Set. Copy of Agreement (v) Four Nos free serviceing with complete material such as Lubricating oil, coolent, Lub oil filter, diesel filters, Air filter and fan belts etc as per manufacturer recommendation will be deemed included in the unit rate of DG set. Copy of Agreement from the manufacturer for free servicing with all required material shall be submitted to Engineer-in-Charge by the contractor before completion of the work. (vi) Any other items which are not mentioned above but are essential for smooth functioning of DG set shall also deemed to be included in the quoted rates.

Supply,installing,testing and commissioning outdoor type,step down transformer of 63 KVA capacity,11 KV/433 Volts (at no load) AC 3 phase 50 HZ double copper wound type core,oil immersed,naturally cooled,oil natural Air Natural(ONAN) with external cooling tubes delta connected on primary side (HV) and star connected on secondary side (LV) in accordance with vector group DYn-11 with neutral brought out on secondary side (LV) and having trapings at (-) 10% & +10% on HV side to changed by means of hand operated off load tap changer gear. The maximum temperature rise should not exceed 45 degree celsius in oil and 55 degree celsius in HV/LV winding when measured by resistance method after cotinuous full load run on an ambient temp of 40 degree celsius. Transfomer shall comprise of the following (Make: ABB/Schneider/Rajasthan Transformer/crompton Greaves/ITE- Gurgaon/ Indian Transformers and Electricals Pvt Ltd) :-

LT side (secondary side) consisting four nos porcelain bushings with copper studs,complete with nut & washers complete with copper bus connectors of suitable capacity/fittings material in cable box complete.

HT side (Primary side) consisting of three nos porcelain bushing with dopper rods,complete with nuts and washers complete.

Oil conservator with filter type drain valve and oil level gauge

De-hydrating breather with first fill of dehydrating agent (silca gel)

Explosive vent & themoneter pocket on tank cover oil level gauge oil drain fitter valve lifting lugs oil filling hole with cap/plug with connection plate complete air release valve plug and four nos plain solid cast steel detachable rollers.

One No 100 mm dia,dial type thermometer vapor pressure type having range 0-120 degree celsius with metal guard having maximum perimeter temperature reading indicator with re-setting device.

Two earthing terminals on tank cover to facilities fixing of 50x6mm galvanised iron earth strip for earthing of neutral & body. .

Rating and diagram plate and terminal marking plate

Extra bushing for neutral on LT side for providing independent set of earthing for neutral 2 Nos

First filling of new and unused transformer oil, IS 335 marked filtered and tested upto 60 KV dielectric strength at 2.5 mm air gap between testing electrodes.

Note : (i) PCC Foundation for transformer as per OEM standards is included in unit rate (ii) Any other items which are not mentioned above but are essential for smooth functioning of transformer shall also deemed to be included in the quoted rates.

Supply, laying & testing XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable sizes aluminium lugs following sizes nominal cross section complete all as specified and dirceted:- Note :- Earth work, GI Pipe, Sand cushioning, Brick protection shall be measured separetely.

Size 185 Sqmm x 3.5 core

Size 95 Sqmm X 3.5 core

Size 50 Sqmm X 3.5 core

Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for laying of under ground electric cable complete all as specified and as directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete.

M & L dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable and gentally hand ramming and consolidation of thickness of sand 18 cm all as specified and directed.

Supply and laying sub class B bricks of size 25cmx15cmx7.5cm for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

Supply and fixing of GI tubing, light grade, 50 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete.

Supply and fixing Electrical GDR cheqeured rubber matting of size 2 mtr X 1 mtr X 25mm thick suitable for HT 11 KV indoor substation as per IS 5424:1969 complete all as specified and as directed. Make:- Joyti / Duratuf Product

M & L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass complete all as specified and directed.

M & L for Earthing with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth lead 32 x 6 mm galvanised iron strip dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of MES Schedule pt-I 1991, GI earth strip 32 x 6 mm protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and directed.

Supply, installation, commissioning and testing LT Panel Board factory made CPRI approved panel, weather, dust & vermin proof outdoor cubical compartmental type, double door, front and back side openable, with providing rubber/PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/sleeves with maintained the colour code and copper strip busbar of suitable rating to MCCB input and MCCB output of suitable length, made out of 3.00 mm thick mild steel CRCA sheet with 40 x 40 x 6mm size angle iron supporting frame and MC 75 channel base including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 2.5 sqmm copper wire and connections of all outgoing / incomming including PCC foundation complete all as directed and specified and comprising of the following fitment accessories :-

OUTGOING (a) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=36 KA breaking capacity, rating 125 Amps, adjustable thermal magnetic setting type with O/L, S/C protection including all fixing accessories with both ends spreader links -02 Nos (Make : Legrand/Schneider/L&T). (b) Spare Pockets for MCCB - 01 No

Supply, installation, commissioning and testing LT Panel Board factory made CPRI approved panel, weather, dust & vermin proof outdoor cubical compartmental type, double door, front and back side openable, with providing rubber/PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/sleeves with maintained the colour code and copper strip busbar of suitable rating to MCCB input and MCCB output of suitable length, made out of 3.00 mm thick mild steel CRCA sheet with 40 x 40 x 6mm size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 1.5 sqmm copper wire and connections of all outgoing / incomming including PCC foundation complete all as directed and specified and comprising of the following fitment accessories :-

OUTGOING (a) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=36 KA breaking capacity, rating 125 Amps, adjustable thermal magnetic setting type with O/L, S/C protection including all fixing accessories with both ends spreader links -03 Nos (Make : Legrand/Schneider/L&T). (b) Spare Pockets for MCCB - 01 No

Supply and fixing steel tubular pole, swaged, complete with cast iron base plate, finial taper plug, bolts, nuts, washer and screws including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to portion embedded in PCC including numbering of poles with two coats of synthetic enamel paints, type 410-SP-55 ,11 meter long complete all as specified and as directed . Note: Earth work and PCC shall be measured and paid separately as these respectively.

M & L for Cross arms, bracing, supports, clamps and back plate, fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as directed including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M& L Pin type, porcelain, vitreous, white, brown or green insulator, 150 mm height, 150 mm dia for 11000 volts grade including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut complete all as specified and as directed.

M& L for Disc type insulator, porcelain, vitreous, white, brown or green insulator ( Single disc assembly ) of size 145 mm height, 255 mm dia ball socket type for working pressure 11 kv volts grade including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut complete all as specified and as directed. .

Supply and fixing Danger notice plate of 1.6mm thick mild steel sheet vitreous enameled white with letter figures and conventional skull and bones in signal red colour and fix with MS clamp for HT size 25 X 20 Cm complete all as specified and as directed.

Supply and fix gang operated air break switches, triple pole, manually operated, mounted on insulators and steel frame, with operating mechanism worked from ground level Vertical type for rating upto 400 Amps, 11000 volts complete with GI operating pipe of heavy duty complete all as specified and as directed.

Supply and fixing drop out fuse assembly complete set with Insulator-02 Nos and connected accessories for 11000 Volts grade of 400 Amps capacity including taking down U/S DO fuse assembly complete all as specified and as directed.

Supply & fix lightening arrestor linear resistance type distribution class 9 KV RMS suitable for 11 KV system pole mounting type conforming to IS - 3070 Part-I complete all as specified and as directed.

Supply, stringing and fixing of aluminium conductor steel reinforced (ACSR) of any type including binding with and including suitable size of binding wire complete complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in coping etc complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate in foundations filling and mass complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M & L for brick work with old size, sub class ‘B’ bricks, laid flat in floor laid dry complete all as specified and directed .

M & L for providing 100 mm thick cement concrete 1:3:6 type C-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor complete all as specified and directed..

M & L for providing 55 mm thick cement concrete 1:2:4 type B-1 (using 20 mm grade stone aggregate) as in sub floor, Path complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and fair complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Supply, installation and testing high wall split units indoor and outdoor complete unit with cordless remote control unit and with inbuilt air ioniser and plasma filter for better indoor air quality with PM 2.5 filter, BEE 5 Star rating and EER 3.2 of capacity 1.5 TR (Ton of refrigeration) including metal wall hunger of suitable size for fixing outdoor unit at wall complete all as specified and directed. Make:- Carrier, Model: EMPERIA Nxi(5star) or equivalent model of Blue Star/LG.

Supply and installation of Voltage stablizer for automatic operation, single phase naturally air cooled indoor type and dsigned for input variation between 130 Volts to 250 Volts with output Voltage Stablizer at 230 with of +- 2.5% and capacity of 5 KVA complete all as specified and as directed. Make: V-Gaurd /Blue Star/ Voltas.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 6.0 Sqmm size with multistranded copper conductor,drawn in and including non metallic rigid PVC conduit medium grade, inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles etc of size 20 mm external dia in concealed wiring system by cutting of wall and making good disturbed surface of wall as per existing and including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green colour PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and as directed.

Supply & fixing sheet metal earth plug, socket single pole and neutral complete with single pole MCB 32 Amps 240 volts complete all as specified and as directed.

Supply and fixing double door TPN DBs four way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed .

Supply and fixing MCB TPN 50 to 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing with MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete

AAY JAY ENTERPRISE

MONA GENERATOR SEVICES PVT. LTD.