REPAIR TO DRAIN, FENCING AND HARD STANDING AT PG AREA AT DHANA MIL STATION.

Amount

Demolition of brick work / stone masonry built in Cement Mortar including all quoins, arches, and pillars etc., complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floor and paving n.exc 15 cm in (below or above Ground floor) etc., complete all as specified and directed.

Material & Labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation, path and hard standing etc., complete all as specified and directed.

Material & Labour for Cement Concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channels and drains etc., complete all as specified and directed.

Material & Labour for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 etc., complete all as specified and directed.

All as per item No 5 above but except bricks complete all as specified and directed.

Material & Labour for walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:6, complete all as specified and directed.

All as per item No 7 above but except stone complete all as specified and directed.

Taking down cement plaster on brick walls etc including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Material & Labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregates) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Material & Labour for Rendering 15mm thick on fair face of brick work or concrete surfaces in CM 1:4 etc., complete all as specified and directed.

Material & Labour for two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel surfaces, complete all as specified and as directed.

Material & Labour for Mild steel 0.63 mm thick plain black sheet in wall cladding, steel gates and similar work cut to size holes punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams including bending or turning up mitered angles etc as requires, complete all as specified and directed.

Material and Labour for framed work Fe 410-W (Grade - E-250) as in door or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, complete all as specified and directed.

Material & Labour for PCC 1:3:6 type C2 (using 40mm graded stone aggregates) as filling mass concrete in path / hardstanding etc., complete all as specified and directed.

Preparation of steel or iron surfaces of any description, n exc 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint over a coat of red oxide zinc chrome primer etc., complete all as specified and directed.

Material & Labour for 50 mm thick Sand filling under floors or in foundations including watering and consolidation etc., complete all as specified and directed.

Material & Labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid with Grey cement and pigment all as specified and directed by Engr-in-charge.

Material & Labour for Reinforced concrete pipes, class NP3, 300 mm dia, laid and jointed complete with collars, all as specified and as directed.

Material & Labour for Reinforced concrete pipes, class NP3, 450 mm dia, laid and jointed complete with collars, all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and directed.

Material & Labour for Outdoor meteor parking / path tiles 10 to 12 mm thick (square/ rectangular) area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 20 mm thick for laying floor finishes with CM 1:6, complete all as specified and directed

Material & Labour for boulder pitching, laid dry, hand packed tightly, complete all as specified and as directed.

Material & Labour for preparation of old Steel based painted surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition Reinforced Cement Concrete of any description and in any Position not otherwise specifically provided for, complete all as specified and as directed.

Material & Labour for Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Cover Slab of Manholes, Septic Tanks, etc., set in Cement Mortar 1:4 including necessary forms, moulds, etc., complete all as specified and as directed.

Material & Labour for TMT Bars 10mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and as directed.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 41,400.00 /- ]

siddhant construction

CREATIVE CONSTRUCTION

m/s mahendra kumar khare contractor

Pandey Construction and Engrs

SAGAR MOTOR AND TRACTOR CO

SUNIL KUMAR KORPAL