Loading
Loading…
Loading…
Tender Value
₹41,254
Closing Date
24 Sept 2026, 6:00 pmDue tomorrow
Sub Div Engineer Civil
BSNL Civil Sub Division 1, CTO Complex, Nehru Garden Road JALANDHAR 144001
Provision of aluminium partition in Ground floor rooms rented to ESI department at Admn. building at Phagwara.
2026_BSNL_291142_1
20 /EE/BSNL/CD/JL/NIT/SDE/2026-27
Open Tender
Civil Works
Item Rate
30 days
Admin building Phagwara
Please refer Tender documents.
10 documents required · 10 mandatory
₹177
Accounts officer (Cash), BSNL, Jalandhar
17 Sept 2026
17 Sept 2026
28 Sept 2026
17 Sept 2026
24 Sept 2026
17 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : a) For Fixed Portion | |||||
| 1.01 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 20 | Kg | 10 | ₹200 |
| 1.02 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). | - | - | - | - |
| 1.03 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 25 | Kg | 10 | ₹250 |
| 2Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. | |||||
| 2.01 | Pre-laminated particle board with decorative lamination on both sides. | 8 | Sqm | 10 | ₹80 |
| 3Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : | |||||
| 3.01 | 100 mm | 8 | Nos. | 10 | ₹80 |
| 4Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) | |||||
| 4.01 | 115 mm | 8 | Nos. | 10 | ₹80 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.09 MB
BOQ_339578.xls
BOQ • 1.59 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .