Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.9 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹35.9 L+₹1.1 L (3.03%)Rejected-Finance 25 13 1 AMBEGAON PATHAR PUNE 411046 | PUNE | MAHARASHTRA | 411046 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹36.9 L+₹2.0 L (5.77%)Rejected-Finance N A | NA | NA | 121004 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹37.0 L+₹2.1 L (6.04%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹37.6 L+₹2.8 L (7.93%)Rejected-Finance B 1 2 MAHESH NAGAR AMBALA CANTT 133001 HRY | AMBALA CANTT | AMBALA | HARYANA | 133001 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹47.4 L
EMD Value
₹94,800
Closing Date
6 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineer North General Cariappa Marg Camp Pune 411001
GE (N) P/TOKEN- 57 OF 2022-2023 SPECIAL REPAIR TO T-08/1, T- 08/2 RS ROAD AND T0-2 /B-5, TARPORE ROAD AND CERTAIN DEPOSITE WORKS UNDER AGE B/R CENTRAL AT GE (N) PUNE
2022_MES_562279_2
GE (N) P/TOKEN- 57 OF 2022-2023
Open Tender
Civil Works
Item Rate
240 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹94,800
Yes
28 Feb 2023
17 Dec 2022
13 Jan 2023
17 Dec 2022
6 Jan 2023
24 Dec 2022
19 Dec 2022 - 22 Dec 2022
Amount
Material and labour for roof tiles Mangalore pattern interlocking at side joints, laid dry including dismantling single layer Mangalore pattern or similar tiles in roofing and rubbish off the premises complete all as specified and as directed.
All as per serial item No 2.00 here-in-before but except tiles but including dismantling of existing tiles.
Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:6) etc including dismantling of tile and rubbish off the premises complete all as specified and as directed.
Supply and fix for 2nd class hardwood clean sawn tile battens, cross sectional area exc 5 and n.exc 15 Sqcm spaced at 30 cm centres to centres fixed with nails complete incl dismantling of scantling and rubbish off the premises all as specified and as directed. (NOTE:Measurements shall be taken overall including both battens and spaces. Deductions shall be made only for openings exceeding 0.40sqm each).
All as per serial item No 4.00 here-in-before but except batten including dismantling of existing battens.
M&L Fibre board Eves/ Weather Boarding 18 to 20mm thick or Feather Edged 15mm to 20mm thick and fixed with 30mm Lap, complete as approved arch pattern any size and shape including taking down existing boarding complete all as specified and as directed.Make: V-Board(Visaka Industries Ltd)/Everest
Dismantling plain or corrugated steel sheeting / AC Sheet , aluminium sheeting of any gauge or any thickness, as in roof coverings complete all as directed.
Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.
All as per item No 08 above above but plain sheet fix in valley gutter / ridge
S&F in repair for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed.
S&F in repair for 6mm thick asbestos cement, two piece adjustable serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed.
Dismantling of old steel scrap iron work obtained from taking down etc.
M&L for Steel work in round or rectangular tube section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250 quality A) all as specified.
Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed.
Supply and fix for 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.
Material and labour for cutting chases in brick wall, not exc. 10cm girth, pinning in for concealed water tubing and making good to facings where required and pointing to cement mortar (1:3) complete all as specified and as directed.
Material and labour for false ceiling with 10mm thick 1800mm x 1200mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of POP with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer including dismantling of existing ceiling of any description and any thickness including grid etc complete all as specified and as directed. NOTE: POP ceiling to be made in two /three tier design)
M&L for plaster of paris decorative cornices/moulding to the pattern as approved, cross sectional area exceeding 13 Sqcm and not exceeding 25 Sq cm and fixed in decorative pattern including preparation of surfaces and applying two coats of acrylic distemper over a coat of primer matching with the colour of ceiling complete including dismantling of all as specified and as directed.
Supply and fix in repair for 100mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed.
Supply and fix in repairs for brass locks, cupboard, grade 1, 75mm size, 6 levers with duplicate keys with brass key hole complete all as specified and as directed.
S&F in repairs Stainless steel butt hinges medium weight 100mm with all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm complete all as specified and as directed
S&F in repair floor power door stopper of Stainless steel body and tongue 135 mm anodised with hard drawn steel spring fixed in floor complete all as directed and specified.
Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed
Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.
Taking down shutters of any description, area not exc.1 sqm each complete all as directed.
Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.
Taking down shutters of any description, area exc.2sqm each complete all as specified and as directed.
Material and labour for 2nd class hardwood, plain, solid straigtht chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed .
Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed
Supply and fix for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and as directed.
S&F Aluminium door handle 125mm size cast type.
S&F Aluminium anodized barrel tower bolt 200mm size.
S&F Aluminium anodized barrel tower bolt 150mm size.
S&F Stainless steel butt hinges medium weight 100mm with all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm complete all as specified and as directed
Supply and fix for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed
Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.
Supply and fix for aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.
M&L for complete removal of existing treatment on walls/ceiling using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, complete all as specified and directed.
Preparation of surfaces by applying wall care putty 1 to 1.5 mm thick on walls /ceiling surfaces , filling cracks by crack filler and smoothen the surfaces with using sand paper etc complete all as spd and directed.
M&L for two coats of acrylic distemper over a coat of alkali resistant primer of approved tint on wall surfaces
M&L for two coats of acrylic distemper over a coat of alkali resistant primer of approved tint on ceiling surfaces
M&L for applying two coats of luster paint over a coat of cement primer to wall/ ceiling surfaces complete all as specified and directed.
M&L for applying two coats of acrylic exterior emulsion paint on roof/ wall /floor etc, over a coat of primer complete all as specified and as directed. (note: height of building exceeding 5m)
Preparation of old surface of wall by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc., removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrylic exterior emulsion paint complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint.
M&L for preparation of wood surfaces and wood based material new or old of any description and girth not other wise described and treated with two coats of creosote
M&L for preparation of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of pink primer.
M&L for preparation of old surfaces of wood and wood based material of any description in ceiling/wall /joinery etc over 10cm width or girth and applying one coat of synthetic enamel paint.
Material and labour for 18 to 20 mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed.
Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.
M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and directed.
- Ditto- all as per Srl Item No. 58 above but except bricks
Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for double charged vitrified ceremic tiles 10 mm thick (square/rectangular) polished, area of each tile exc. 0.18 sqm not exceeding 0.36 sqm, in flooring etc , laid over and including screed bed of 15 mm thick cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade in any cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.
M&L for double charged Vitrified ceremic tiles 10mm thick of approved shade as in vertical surfaces, skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade and including backing coat of 10mm thick in cement mortar (1:4) including , cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.
Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.06sq.m but not exceeding 0.11sqm as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.
M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7 to 8mm thick of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 including cement mortar bedding (but not backing), removing rubbish off the premisescomplete all as specified & directed.
S&F, in repair 19/20 mm thick pre laminated board, exterior grade pre laminated one side with decorative choice lamination & other side balancing white lamination as in kitchen cabinet or fixed with screws to timber frame work, complete all as specified and as directed.
S&F external teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails.
S&F Piano hinges, mild steel, bright finish or electrogalvanised 30mm width of flaps
S&F 40 mm dia, mild steel bright finished cup board knobs fixed with nut, screw and washer complete all as spd and directed.
S&F, 100mm size butt hinges medium weight, colled rolled, mild steel and fixed complete all as specified and as directed.
Supply and fix for 100mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed.
Supply and fix for brass locks, cupboard, grade 1, 75mm size, 6 levers with duplicate keys with brass key hole complete all as specified and as directed.
S&F, Magnetic catches of brass body and striking plate in complete all as specified and as directed.
Dismantling floor, hearth or wall tiling/paver block/chequered tiles including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.
Dismantling of stone slabs and tiles of any description or thickness in floors,platforms aprons etc. laid bedded and pointed in any mortar all as specified.
M&L for coloured glazed ceramic tiles of size 300 x 450mm x 8mm thick of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over & including 10mm thick rendering in cement mortar 1:3 as in vertical surface etc complete all as specified & directed.
M&L for coloured glazed ceramic highlighter tile of size 600mm x 300mm x 7 to 8mm thick, colour and pattern as approved by GE, as in vertical surface set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar 1:4 etc complete all as specified & as directed.
M&L Machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as in platforms , verticals (as in partition below granite stone) complete all as specified and directed
Material and labour for PVC Coated Gypsum board false ceiling of size 600 mm x 600 mm & 09 to 12.00 mm thick and including GI powder coated grid work with using 32mm x 23.5mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm including dismantling of ceiling board of any description and any thickness including cover fillets/ grid etc. complete all as specified and as directed. Make :- Armstrong / Gyproc Diaken, New Age (ACE). Note: Height of ceiling is above 5 metres.
M&L for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.
M&L for preparation of old plastered or unplastered surfaces and applying two coats of cement base paint as specified and directed.
S&F in repairs Overhead shower round shape 100mm single flow (ABS Body Chrome plated with gray face plate) with Rubit cleaning system Make- Jaguar Cat No : OHS:- 1989
S&F in repairs wall hung wash basin with full pedestal height 790 mm make CERA cat no S2040104 was basin , cat no S2090101 pedestal with CP waste coupling, chain and plug, waste fitting, union and waste pipe 32mm dia of required length and all necessary inlet and outlet connections complete. Make – Cera / Hindware or equivalent.
Supply and fix in repairs vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and PVC flusing cistern of 10 lit Capacity with connecting pipe antisyphonage pipe and all necessary fittings etc complete all as specified and as directed.
Supply and fix in repairs for vitreous china, squatting pan of 'Orissa' pattern, size 580 mm x 440 mm, white, with PVC 'P' of 'S' Trap, front or back inlet and integral foot rests any pattern, including provision of lime concrete bedding including connection to trap and to flushing pipe, antisyphonage pipe including PVC flushing cistern of 10 Lit Capacity & 32mm dia with flush pipe etc. and making good to the floor complete all as specified and as directed.
S&F in repairs chromium plated two way bib cock with wall flange 15mm dia Cat No. 7041 of make Jaguar ‘QUEEN'S COLLECTION' series or equivalent as approved by GE. all as specified and as directed.
Supply and fix in repair for hand shower, chromium plated (health faucet) of ABC body with 8mm dia 1.2 metres long spirochrome flex tube and wall hook all as per Cat No. ALD-587 of make Jaquar or equivalent as approved by GE complete all as specified and as directed.
S&F in repair chromium plated fittings angular stop cock with wall flange 15mm dia Cat No. 7053 of make Jaguar ‘QUEEN'S COLLECTION' Series or equivalent as approved by GE. all as specified and as directed.
Supply and fix in repair for chromium plated towel rack, Cat No. 7781 of make Jaquar ‘‘QUEEN'S COLLECTION' Series or equivalent as approved by GE complete all as specified and as directed.
S&F in repair chromium plated wash hand basin mixer 15mm dia of make Jaguar ‘‘QUEEN'S COLLECTION' Series or equivalent as approved by GE. all as specified and as directed.
S&F in repair chromium plated toilet paper holder, Cat No. 7751 of make Jaguar ‘‘QUEEN'S COLLECTION' Series or equivalent as approved by GE. all as specified and as directed.
S&F in repair chromium plated soap dish, Cat No. 7731 of make Jaguar ‘QUEEN'S COLLECTION' Series or equivalent as approved by GE all as specified and as directed.
S&F in repair chromium plated towel ring ,Cat No. 7721 of make Jaguar ‘QUEEN'S COLLECTION' Series or equivalent as approved by GE all as specified and as directed.
S&F in repair chromium plated wall mixer 3-in-1 system with provision for both telephone shower and overhead shower complete with wall flange with 115mm long bend pipe ,Cat No. 7281 of make Jaguar ‘QUEEN'S COLLECTION' Series or equivalent as approved by GE all as specified and as directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm. Make: Prayag
S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls
'- Ditto all as per item No 98 above but 110mm dia
S&F for PVC (SWR) bends of any radius with oval and access door of 75mm dia
-do- as above but 110mm dia
S&F in repairs chromium plated sink cock with regular swinging spout (wall mounted model) with wall flange complete all as specified and as directed. Make: Jaquar Cat part No ARI 39347S or equivalent of make as per Appx 'A' as approved by GE
S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste coupling including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm x 203 mm, bowl size 405mm x 354mm x 203mm all as specified. Make Prayag Cat Part No. 1239D or equivalent of make as per Appx 'A' as approved by GE.
S&F in repair cast iron Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4).
M&L(SWG) gully trap 150mm setting and jointing with solvent cement.
M & L for Cutting chases, pinning in brick wall and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth
Taking up or down 15 mm bore steel tubing with all fittings and connections complete all as directed.
Taking up or down 20 mm bore steel tubing with all fittings and connections complete all as directed.
M&L for GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors in repairs.
M & L for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings laid in trenches complete all as specified and as directed.
Supply and fix in repair for 20mm bore dia gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
Supply & Fix in repairs rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore brass stop cock, high pressure with crutch or butterfly handle etc complete including dismantling existing water tank all as specified and directed.
S&F factory made 100% solid wood polymer composite (WPC) 28 to 30 mm thick board in door shutter including taking down old shutters exc 1sqm and nexc 2 Sqm each complete all as specified and directed. Make: Rajshri/ Sintex/Duraplast/Accucell
Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade) etc as specified and directed.
Material and labour in repairs for 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern complete all as shown on drawing and as directed.
Material and labour in repairs for 12mm thick plywood, grade BWR, type BB, number of ply 7 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern complete all as shown on drawing and as directed.
Material and labour in repairs for 6mm thick plywood, grade BWR, type BB, number of ply 5 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern complete all as shown on drawing and as directed.
Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.
Material and labour for 0.90mm thick white laminate type 1 with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.
Material and labour for 2nd class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 3 Sq.cm but not exc. 6 Sq.cm complete all as specified and as directed.
S&F stainless steel auto close/ hydraulic hinge suitable for shutter of not exc 0.50 sqm area complete all as specified and as directed. Make Prayag Cat No. 5120 or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F stainless steel hinge 75 mm long for cupboard shutter fixed with Self Tapping screws complete all as specified and as directed.
S&F 75 mm long stainless steel handles for cupboard shutter fixed with Self Tapping screws complete all as specified and as directed.
M&L for preparation of New steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint over a coat of red oxide primer..
Material and labour for rendering 10 mm thick in CM (1:3) with waterproofing compound as per manufacturer's instruction and applying two coats of Latex shield 2K make Berger or equivalent grade of pidilite in sunken portion , terrace /roof complete including cleaning of surface etc all as directed. (Note:- The rate quoted by Contractor shall include the Cost of Water Proofing compound)
M&L for preparation of old plastered or unplastered wall surfaces and applying two coats of acrylic distemper over a two coat of primer as specified and directed.
Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC casing caping including all accessories after fixing on surface of walls /ceilings etc with Plastic surface boxes of suitable module, earth dolly, covered with modular white cover plate & frame for modular switches , including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures One light / wall / exhaust fan point controlled by one, one way switch 6 Amps completeall as specified and as directed
- Ditto- all as per item No 127 above but One ceiling fan point controlled by one, one way switch 6 Amps and regulator
- Ditto- all as per item No 127 above but One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed
- Ditto- all as per item No 127 above but One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed
- Ditto- all as per item No 127 above but One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed
- Ditto- all as per item No 127 above but One two way light point controlled by two nos. two way 6A switches complete all as specified and as directed
Description all as per 1 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 5 pin socket outlet plug point,6/16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following all as specified and as directed
Description all as per 1 here-in before but using 4.0 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for 6/16 Amps power point including necessary running of 4.0 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following all as specified and as directed
Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed.
Supply and fixing Modular Switch - 6 Amps, Single pole two way, one module complete all as specified and as directed.
Supply and fixing Modular Bell push - 6 Amps, Single pole one way, one module complete all as specified and as directed.
Supply and fixing Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed.
S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed.
S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed.
Supply and fixing, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed.
Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed.
S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed
S&F for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body obtained serviceable from complete all as specified and as directed.
S & F Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed
Supply only Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/ CFL direct fit lamp, in B-22 cap complete all as specified and as directed
Supply and fixing 20/22 Watt Inverter LED Batten with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed.Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector, making good disturbed surfaces complete all as specified and as directed. Make Jaquar cat No -LGLZ01X010XW , Orient Cat No- LBLN-10-C-SQ
Supply and fixing die cast aluminium housing , opal white PC diffuser, With E27 cap, IP 54 rated LED bulk head fitting suitable for 10 Watt LED lamp including lamp complete all as specified and as directed
Supply and fixing ceiling/ wall surface mounted round LED down light with PC housing IP54 rated dia 175mm height 70mm suitable for 10 Watt LED lamp including lamp complete all as specified & as directed Make- Jaquar Cat No-LVOLO1RO10XW or equivalent
Supply and fix for energy saving new generation environmental friendly long life versatile pressure die aluminium IP-66 for security light fitting luminaire of capacity 30 watt with high power LEDs as light source and electronic driver , necessary mounting arrangements and provision of 1.0 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 1.5 metres long GI pipe medium grade bracket of suitable size & shape to light fitting mounting dia, secured and fixed with clamps made out of MS flat iron of size 25mm x 5mm, nuts, bolts etc , as approved, complete all as specified and as directed. Make- Jaquar Cat No LPCRSRT30WXW or equivalent
Supply and fixing Decorative wall light fixture made up of Polycarbonate, suitable for 15 W retrofit CFL including lamp complete all as specified & as directed (Spiral B-22 base). Make- Havells Cat No - LHDL06160099 or equivalent
Supply and fixing LED post top 25W made in die-cast aluminium housing with decorative clear opal acrylic diffuser and IP 65 protection including provision of flexible copper conductor cable of suitable size connector and taking down old unserviceable fitting from existing postion, making good disturbed surfaces complete all as specified and as directed. Make-Bajaj Cat No - BGCTN 25W LED WW or equivalent
Supply and fix exhaust fan, AC single Phase, working on input voltage 140-285 , of size 250m sweep, 1200 RPM, Power 20 W with BLDC Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed .
Supply and fixing Energy Efficient BLDC Motor, wall mounted fan , Power-32 W consumption on high speed, Input voltage 90-245 V-AC single phase, Speed: 1350 RPM ,50 Hz , 400 mm sweep, 3 blade, and making connections complete all as specified & as directed.
Supply and fixing ceiling fans (5 Star rated) High speed working on single phase input voltage 140-285 , Sweep- 1200 mm, 350 RPM (±10%) , complete with compact BLDC Motor, blades, down rods, with remote canopy and all accessories including making connections with provision of flexible wire 23 /0.0076 three core copper conductor black/ white from ceiling rose/connector to fan complete all as specified & as directed. Make- Havells (Enticer), Orient (Aeroquiet) , Bajaj (Energos),
Taking down ceiling / exhaust fan and fixing, hanging connecting in same location or at site as directed after proper cleaning including provision of flexible PVC copper conductor cable of size 23/0.0076 twin core from ceiling rose or connecter to fan including taking down fan complete all as specified and directed.
Supply and fix electric water heater, storage type shock proof with SS Glass line inner tank (rust proof) and heating element upto 2 KW capacity 25 litre, digitial temperature display, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, ELCB shock safe safety plug connected with 3 core cable of suitable size / length, hot and cold water pipe connections not less than 45 Cms as recommended by manufacturer including 04 Nos of hold fastener nuts of required suitable size fixed in brick / stone wall complete all as specified and as directed. Note- Minimum 07 Years warranty on Inner tank and 04 Years on heating element shall be provided by manufacturer from date of purchase. Firm should obtain warranty/ gurantee from the manufacturer & submit the same to the department. Make- Glen WH-7055SQWH25LD, Bajaj Model Calenta Digi , Havells Model- Monza Digi (GHWAMJSWH025)
Disconnecting water and electric connections from existing position of geyser capacity 25/50 Ltr, taking down geysers fixed to walls at any height , cleaning , servicing as directed by Engnr-in- Charge and fixing in existing position complete all as specified and as directed.
Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed.
S & F Distribution Board sheet metal enclosure TPN 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCB / Isolator / RCCB / RCBO as incomer and SP/TP MCB's as outgoing , With 100 A Copper Busbar for each phase, With 2 Neutral bar, 2 Earthbar and Cable ties for cable management, Fully insulated busbar & shrouded Neutral bars IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed.
S & F sheet metal enclosure MCB DB SPN 12 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed
S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed
Supplied & fixed sheet metal enclosures with socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 10 amp, 240 Volts complete all as specified and as directed.
Supply and fixing amp rating 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 40 To 100 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.
Refixing only old serviceable MCB SP /SPN obtained from Item No 29 here-in-before duly cleaning including necessary electrical connection with proper size of copper wire complete with connection testing and commissioning complete all as specified and as directed.
Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.
S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed.. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).
S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed.. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).
Excavation in Trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/ foundation of Pole / Stays / Pipe etc getting out in soft loose soil, complete all as specified and as directed.
Returning, Filling in including Spreading, Leveling, Watering and Well ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed.
Removing Surplus soils to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.
Taking down/out unserviceable UG Cables of any Cross Sectional Area and connections and joints including pipes, bricks, etc of any description laying in trenches or fixing with walls / poles, segreating serviceable Bricks/Precast covers, pipes, cables etc, and keep in safe custody for reuse, complete all as specified and as directed. NOTE : Earthwork will be measured and paid under appropriate Items.
Supply & laying LT UG XLPE sheathed PVC insulated screened, PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, cross-sectional area 10 Sqmm 4 core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed. NOTE (i) Earthworks, Corrogatted pipe for cable protection, will be measured and paid under appropriate Items. (ii) Steel cable glands of adequate size , aluminium cable socket/ lugs ( bottle/ plate ) of required size at end termination in panel boards/ DBs , & Mild steel flat clamp of size not less than 30x5mm for securing cable pipe along pole , on wall with nut, bolt, washers etc is deemed to be included in the item rate quoated.
Supply and laying Double Wall Corrugated ( DWC ) HDPE pipes of size 50 mm, chemical resistance, flexible, tough along with accessories such as coupler and bend, with rubber O ring for electrical applications as in cable protection pipe complete all as specified and as directed.
Taking down chowkat or frame ( Wooden) / Steel not exc. 1.5 sq. m and removing to store complete all as specified and as directed
Supply and fix for aluminium anodised powder coated louvered ventilator with provision of exhaust fan opening with adjustable louvers using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.
Supply and fix for aluminium anodised powder coated three track sliding window with two glazed shutters, one shutter with and including 4mm thick ordinary quality float glass and one shutter with and including stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining of transparent colour etc including dismantling old unserviceable window and making good complete all as specified and as directed. Catalouge numbers of Jindal company or equivalent make sections : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.
M&L for Maintenance Free Grounding Solution set earthing comprising of High tensile low carbon steel rod of 3 Mts length & 17.2 mm dia with 250micron (average) molecularly bonded copper on the outer surface along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. Back-fill compound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground including taking out existing earthing complete all as specified and as directed. Make: JEF Technology or equivalant in True power earthings/Excel fibrotech NOTE :- (a) Rates for Excavation and earthwork in any type of soil/strata, testing on completion, Copper strip 20x3 mm and 40 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. (b) On testing, after completion, if the earth resistance < 3 ohms is not obtained, earthing will be rejuvenated at no extra cost till the desired earth resistance is obtained. (c) Test certificate from the OEM has to be produced by the contractor for the material used in earthing
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.
Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified.
M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly One light point controlled by one, one way switch 5 Amps complete all as specified and as directed
(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator
(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.
(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.
All as per item No 4 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly.
S & F for wall mounted 20 watts indoor Inverter batten with opal diffuser, IP 20, with 3 to 4 hrs back up with out put of 2000 lumens , box type (decorative) light fitting, 230 volts with polycarbonate type body and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and as directed. Make :- Halonix Cat part No.HLB-07-20-CW-INV ,Philips , Havells LHEXACP7FN1W020.
S & F for LED down light recess-mounted designer panel with aluminium die cast housing luminare, round type 15 watts with efficiency of 1500 lumens per watt, Series of downlighters with low depth round & larger dia, powder coated white finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver suitable for office spaces sleek design white finish operating voltage 150 V-270 V AC, 50 Hz all as specified. Make- JAQUAR Cat Part No LNEP01S015XN/LLCN01R01SXN , Halonix HLDLR31-15CW/HLDLR-S27-15-CW, pHILIPS DN 296B LED15S-6500 PSU WH
S & F for wall/ceiling mounted e 10 watts, or more indoor, bosx type light fitting white / warm white 2 feet as per site requirement with extruded aluminium feet sink provided for efficient heat dissipation and integrated electroinc driver connector block etc complete with all accesaries internaly pre wired and necessary mounting arrangement, provision of new 3 core multistandarded copper conductor of size 23/0.193 form ceiling rose to fitting including LED tube 2' x 10 watt complete all as specified and as directed specified and as directed. Make :- JAQUAR Cat part No LGLZ01X010XN ,Bajaj Cat Part No BCLSB 10 NW ,Philips Cat Part No BN021C LED 12S 6500 PSU GR
S & F for MCB DB, SPN, sheet metal enclosure, 8 way with 200 amps rated bus bar double door, fixed on wall good to disturbed surfaces, and connecting with existing cable complete all as specified and directed.
S & F for MCB Single pole and neutral rated capacity 40 amps, 240 volts breaking capacity 10 KA complete all as specified and as directed.
S & F for MCB Single pole rated capacity 5 to 32 amps, 240 V breaking capacity 10 KA complete all as specified and as directed.
Supply and fix MCB Protected SRCD box 4 module 25 Amps with surface mounted PVC enclosure SRCD(socket residual current device) single pole with a three pin socket & top complete with 25 Amps MCB single pole.
M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6.0 Sqmm nominal area and drawing into PVC non metallic rigid PVC Conduit/casing caping as per site rquirement including one run of PVC insulated 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6.0 sqmm cable,one run of 6 sqmm cable and one run of PVC heavy duty concealed conduit will be measured as one unit
S & F for plastic body exhaust fan, AC single phase, 240 V of size 200 mm sweep with louvers (as per Cat Part No -Maxma DX 8" of Make- Bajaj or equivalent Make- of crompton/Havells/ Indo Asian)including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed.
M & L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3, SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection and 20 mm dia medium grade GI pipe for watering purpose inlcuding funnel, wire mesh, RCC pit with cover complete and connected to earthing test point all as specified or indicated including testing on completion.
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
Sai Construction
J P ASSOCIATES
Galaxy Construction
ANIL CONSTRUCTION CO.
VISALAKSHI WATER PROOFINGCOMPANY PRIVATE LTD
SALIM MUSA SANDE
GANESH ELECTRICALS AND AIR CONDITIONERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .