Construction of 02 no. 132kV GIS Line Bay at 400kV GIS Substation Jehta, Lucknow

Tender Inviting Authority: Superintending Engineer, Electricity 765/400 KV Substation Design Circle, U.P. Power Transmission Corporation Limited, 11th Floor, Shakti Bhawan Extension, 14-Ashok Marg, Lucknow-226001

Name of Work: Construction of 02 nos. 132kV GIS Line Bays at 400kV GIS Substation Jehta, Lucknow

Tender Specification No. : ESD-8/227

SCHEDULE OF QUANTITIES AND PRICES FOR 02 NO. 132KV GIS LINE BAYS AT 400KV GIS SUBSTATION JEHTA, LUCKNOW

(SUPPLY CHARGES)

( All Prices are in Rupees )

Sl. No. EQUIPMENT / ITEM (Complete with all fittings, accessories, associated equipments etc. as specified in Technical Specifications) Unit Qty. Quoted Unit prices in Rs. (Exclusive of GST and other duties & taxes) Total FOR Destination Prices without GST (4x8)

Unit Ex-Works Prices Unit Pkg, Fwdg, Charges Unit Freight & Insurance charges Total unit rate without GST (5+6+7)

1 145kV Line Feeder Bay Module: 145kV, 1600A, 40kA, SF6 gas insulated Line feeder bay module each comprising of SF6 gas insulated circuit breaker (1250A), current transformer (1000-800-400/1-1-1A),voltage transformer, two bus-bar disconnectors (1600A) with common grounding switch, line disconnector with safety grounding switches, high speed safety grounding switch, Local Control Cubicle, SF6 gas monitoring system for complete bay, gas insulated terminal connection for connecting XLPE cable with cable termination enclosure and other accessories with 132 kV GIS with overhead line to complete Line feeder bay module as per technical specification. Nos. 2

2 145 kV Extension busbar including adapter Module Integration required to connect Existing 145 kV bus bar to new extension 145 kV bus bar for Double main Bus (for Bus-I and Bus-II) Set 2

0.0 120 KV Surge Arresters Nos. 6

0.0 Control and Relay Panel

0.9 132kV Feeder Control & Relay Panel Simplex Type (SAS Based) Nos. 2

0.0 132kV Power Cable:

0.9 1000 Sqmm 132 kV XLPE Cu Power Cable Mtr

0.0 Indoor Termination Kit suitable for 145 KV 1CX1000 Sq.mm XLPE Copper conductor Power cable for GIS End Nos. 6

0.9 Outdoor Termination Kit suitable for 145 KV 1CX1000 Sq.mm XLPE Copper conductor Power cable for Outdoor End Nos 6

0.0 Cable link box with SVL Nos 6

0.0 Cable link box without SVL Nos 6

0.9 3.3 kV , 300 Sqmm Copper Earthing cable Mtr 120

0.0 3.3 kV , 300 Sqmm Copper Bonding cable Mtr

0.0 Line Termination Items :

0.9 Single Suspension fittings for ACSR Panther Nos 6

0.0 70 KN Porcelain Disc insulator Nos

0.9 PG Clamp suitable for Panther/Panther Nos

0.0 ACSR Panther conductor KM 1

7 1.1 kV Grade PVC insulated copper conductor armoured Control Cable (PVC)

7.1 2Cx2.5 sq.mm km 2

7.2 4Cx2.5 sq.mm km 3

7.3 6Cx2.5 sq.mm km 3

7.4 10Cx2.5 sq.mm km 4

7.5 14Cx2.5 sq.mm km 2

7.6 19Cx2.5 sq.mm km 0.5

8 1.1 kV Grade PVC insulated Al. conductor armoured power cables

8.1 4Cx16 sq.mm km 1

9 Grounding/ Earthing System

9.1 75x10 mm MS Flat for earthing Metre 400

###0.9;###0.9 50x6 mm MS Flat for earthing Metre 500

###0.0;###0.0 25x6 mm MS Flat for earthing Metre 400

9.4 50x6 mm Copper Flat for earthing Metre 300

10 Lighting arrangement for bay and switchyard panel room L.S. 2

11 ERW Pipe structure( Tubular Structure for LA,CSE) MT 4.28

12 Hot Dip galvanised structure for gantry MT 9.272

Total for 02 nos. 132kV GIS Line Bays at 400kV GIS Substation Jehta, Lucknow (without GST)

Total for 02 nos. 132kV GIS Line Bays at 400kV GIS Substation Jehta, Lucknow (with GST)

Tender Inviting Authority: Superintending Engineer, Electricity 765/400 KV Substation Design Circle, U.P. Power Transmission Corporation Limited, 11th Floor, Shakti Bhawan Extension, 14-Ashok Marg, Lucknow-226001

Name of Work: Construction of 02 nos. 132kV GIS Line Bays at 400kV GIS Substation Jehta, Lucknow

Tender Specification No. : ESD-8/227

SCHEDULE OF QUANTITIES AND PRICES FOR 01 NO. 132KV GIS LINE BAY AT 400KV GIS SUBSTATION JEHTA, LUCKNOW

HANDLING, ERECTION, TESTING AND COMMISSIONING CHARGES

(All Prices are in Rupees)

Sl. No. EQUIPMENT / ITEM (Complete with all fittings, accessories, associated equipments etc. as specified in Technical Specifications) Unit Qty. Unit Handling, Erection,Testing & Commissioning Charges without GST Total Handling, Erection,Testing & Commissioning Charges without GST (4x5)

145kV Line Feeder Bay Module: 145kV, 1600A, 40kA, SF6 gas insulated Line feeder bay module each comprising of SF6 gas insulated circuit breaker (1250A), current transformer (1000-800-400/1-1-1A),voltage transformer, two bus-bar disconnectors (1600A) with common grounding switch, line disconnector with safety grounding switches, high speed safety grounding switch, Local Control Cubicle, SF6 gas monitoring system for complete bay, gas insulated terminal connection for connecting XLPE cable with cable termination enclosure and other accessories with 132 kV GIS with overhead line to complete Line feeder bay module as per technical specification. Nos.

145 kV Extension busbar including adapter Module Integration required to connect Existing 145 kV bus bar to new extension 145 kV bus bar for Double main Bus (for Bus-I and Bus-II) Set

120 KV Surge Arresters Nos.

Control and Relay Panel

132kV Feeder Control & Relay Panel Simplex Type (SAS Based) Nos.

4.2 Augmentation of Line Panel with existing Bus Bar Protection Panel including all supplies required for successful augmentation Job 2

4.3 Integration of C&R Panel of line bay with existing SAS including all supplies required for successful integration Job 2

5 Laying & Erection of of 132kV Power Cable:

5.1 1000 Sqmm 132 kV XLPE Cu Power Cable Mtr

5.2 Indoor Termination Kit suitable for 145 KV 1CX1000 Sq.mm XLPE Copper conductor Power cable for GIS End Nos.

5.3 Outdoor Termination Kit suitable for 145 KV 1CX1000 Sq.mm XLPE Copper conductor Power cable for Outdoor End Nos

5.4 Cable link box with SVL Nos

5.5 Cable link box without SVL Nos

5.6 3.3 kV , 300 Sqmm Copper Earthing cable Mtr

5.7 3.3 kV , 300 Sqmm Copper Bonding cable Mtr

6 Line Termination Items :

6.1 Single Suspension fittings for ACSR Panther Nos

6.2 70 KN Porcelain Disc insulator Nos

6.3 PG Clamp suitable for Panther/Panther Nos

6.4 ACSR Panther conductor KM

7 1.1 kV Grade PVC insulated copper conductor armoured Control Cable (PVC)

7.1 2Cx2.5 sq.mm km

7.2 4Cx2.5 sq.mm km

7.3 6Cx2.5 sq.mm km

7.4 10Cx2.5 sq.mm km

7.5 14Cx2.5 sq.mm km

7.6 19Cx2.5 sq.mm km

8 1.1 kV Grade PVC insulated Al. conductor armoured power cables

8.1 4Cx16 sq.mm km

8.2 2Cx6 sq.mm km

8.3 3.5 Cx95sqmm km

Grounding/ Earthing System

9.1 75x10 mm MS Flat for earthing Metre

9.2 50x6 mm MS Flat for earthing Metre

9.3 25x6 mm MS Flat for earthing Metre

9.4 50x6 mm Copper Flat for earthing Metre

10 Installation of Lighting arrangement for bay and switchyard panel room L.S.

11 ERW Pipe structure( Tubular Structure for LA,CSE) MT

12 Hot Dip galvanised structure for gantry MT

Total for 02 nos. 132kV GIS Line Bays at 400kV GIS Substation Jehta, Lucknow (without GST)

Total for 02 nos. 132kV GIS Line Bays at 400kV GIS Substation Jehta, Lucknow (with GST)

Tender Inviting Authority: Superintending Engineer, Electricity 765/400 KV Substation Design Circle, U.P. Power Transmission Corporation Limited, 11th Floor, Shakti Bhawan Extension, 14-Ashok Marg, Lucknow-226001

Name of Work: Construction of 02 nos. 132kV GIS Line Bays at 400kV GIS Substation Jehta, Lucknow

Tender Specification No. : ESD-8/227

SCHEDULE OF QUANTITIES AND PRICES FOR 02 NO. 132KV GIS LINE BAYS AT 400KV GIS SUBSTATION JEHTA, LUCKNOW

MANDATORY SPARS

( All Prices are in Rupees )

Sl. No. EQUIPMENT / ITEM (Complete with all fittings, accessories, associated equipments etc. as specified in Technical Specifications) Unit Qty. Quoted Unit prices in Rs. (Exclusive of GST and other duties & taxes) Total FOR Destination Prices without GST (4x8)

Unit Ex-Works Prices Unit Pkg, Fwdg, Charges Unit Freight & Insurance charges Total unit rate without GST (5+6+7)

Select, Excess (+), Less (-)

Tender Inviting Authority: Superintending Engineer, Electricity 765/400 KV Substation Design Circle, U.P. Power Transmission Corporation Limited, 11th Floor, Shakti Bhawan Extension, 14-Ashok Marg, Lucknow-226001

Name of Work: Construction of 02 nos. 132kV GIS Line Bays at 400kV GIS Substation Jehta, Lucknow

Tender Specification No. : ESD-8/227

SCHEDULE OF QUANTITIES AND PRICES FOR CONSTRUCTION OF 02 NO. 132KV GIS LINE BAYS AT 400KV GIS SUBSTATION JEHTA, LUCKNOW (CIVIL WORK)

Sl. No. Item Description Unit Qty Unit Rate TOTAL AMOUNT Without Taxes

1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains , including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. in All kinds of soil Cubic meter

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. Cubic meter 50

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil Square meter 200

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Square meter 400

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Cubic meter 40

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) Cubic meter 40

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Cubic meter 52

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Cubic meter 85

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete Square meter 350

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Square meter 800

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts Square meter 450

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. Kilogram 9100

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) Cubic meter 60

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) Cubic meter 50

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Kg 5000

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) Square meter 250

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) Square meter 120

Neat cement punning. Square meter 450

Arranging and spreding 75 mm thick broken grit 20 mm (Granite stone) uniform for turfing over 100mm thick base course of C.C. In 1:4:8 (1cement:4coarse sand: 8, 40mm stone ballast) top finish by brooming of cement mortar 1:4(1cement: 4 Coarse sand) including supply of all materials, labour and tools and plants etc. required for proper completion. Square meter 350

Supply of 56 mm. dia M.S. Anchor bolts (conforming to IS 266,density 8 T/Cum) 1700 mm. long with base plate (100x100x6mm) welded with anchor bolts including its threading upto a length of 10cm. and also supply of a pair of galvanized standard nuts with threading including supply of 5 mm thick washer and cost of labour, material & T&P for proper completion of work. Number

Supply of 28 mm. dia M.S. Anchor bolts (conforming to IS 266) 900 mm. long with base plate (75x75x6mm) welded with anchor bolts including its threading upto a length of 10cm. and also supply of a pair of galvanized standard nuts with threading including supply of 5 mm thick washer and cost of labour, material & T&P for proper completion of work Number 48

Fixing and grouting 28 mm and above dia bolts in proper alignment level and setout with help of a template complete including supply of all labour & T&P etc. required for proper completion of the work.(labour rates only) . Number

Supply of 25 mm dia.M.S. Anchor bolts (conforming to IS-226) 500 mm long with base plate(50x50x6 mm)welded with anchor bolts,including its threading upto a length of 10cm. and galvanizing upto 15cm from top, also supply of a pair of galvanized standard nuts with threading including supply of 5mm thick washer and cost of labour material and T&P etc. required for proper completion of the work. Number 50

Fixing and grouting 25 mm and below dia M.S. Anchor bolt in proper alignment level and setout with the help of a template including supply of all labour T&P etc. reqd. for proper completion of the work. (labour rates only) . Number 50

Fixing and grouting of trench edging in proper level and alignment including cost of all labour, and T&P etc. required for proper completion of the work but excluding cost of C.C. (labour rates only) . Meter 250

Fixing of template in position level and alignment for grouting of Anchor bolt in main gantry (labour rate only). Number 3

Same in NSI item-23 above but for auxiliary structure. (labour rate only). Number 12

Fixing of cable trench racks in proper position and alignment including cost of all labour, material and T&Petc. required for proper completion of the work (Labour rate only). Number 850

Providing (12x15) mm section groove in plaster including all material, labour and T&P etc. required for proper completion of the work. Meter 150

Champering the edge of concrete in auxiliary structure, of size 25 mm wide in triangular section including all materials, labour & T&P etc complete. Meter 300

2.5 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC Square meter 250

As in NSI item No.-35 above but 4.0 cm thick floor in 1:1.5:3 concrete with out base concrete. Square meter 150

Painting letters & number over cable trench cover or other places with the help of stencils including painting of base of 150 mm. dia of one coat of primer and two coats of superior quality synthetic enamel paint size of letter to be 60 mm. x 10 mm. including cost of all materials labour and T&P etc. required for proper completion of the work including placing of Trench covers in required position Number 500

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Square meter 50

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Cubic meter 10

Placing of trench cover of all size in proper position including transportation from different places within the S/S area including all labour, T&P etc. required for proper completion of the work as per direction of Engineer - in - charge. Number 120

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On concrete work Square meter 460

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. Square meter 350

Supply of 40 mm. dia M.S. Anchor bolts (conforming to IS 266,density 8 T/Cum) 1200 mm. long with base plate (100x100x6mm) welded with anchor bolts including its threading upto a length of 10cm. and also supply of a pair of galvanized standard nuts with threading including supply of 5 mm thick washer and cost of labour, material & T&P for proper completion of work. Number 20

8 Laying and Jointing PVC Pipe. Heading

Total in Figures

Quoted Rate in Figures Select

Total for 02 nos. 132kV GIS Line Bays at 400kV GIS Substation Jehta, Lucknow (without GST)

Total for 02 nos. 132kV GIS Line Bays at 400kV GIS Substation Jehta, Lucknow (with GST)

Quoted Rate in Words

Tender Inviting Authority: Superintending Engineer, Electricity 765/400 KV Substation Design Circle, U.P. Power Transmission Corporation Limited, 11th Floor, Shakti Bhawan Extension, 14-Ashok Marg, Lucknow-226001

Name of Work: Construction of 02 nos. 132kV GIS Line Bays at 400kV GIS Substation Jehta, Lucknow

Tender Specification No. : ESD-8/227

02 nos. 132kV GIS Line Bays at 400kV GIS Substation Jehta, Lucknow

SI. No. Description Amount (in Rs.)

1 Total Price for Supply of Equipments and Material [Schedule-1 ]

2 Total Handling, Erection, Testing & Commissioning Charges [Schedule-2]

3 Total Price for Supply of Mandatory Spares [Schedule-3 ] -

4 Total Charges for Civil works including supply of materials [Schedule-4]

5 Summary of Total Price (1+2+3+4)