SPL REPAIR TO BLDG NO CBB-2 (JCOS MD ACCN) UNDER GE (MCTE) MHOW

Amount

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings/ wall cladding including portions bedded in cement mortar complete all as specified and directed.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified including necessary scaffolding of any height and safety measures at any floor complete all as specified and directed.

Supply & Fixing Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof coverings/ claddings to wall, fixed with self tapping screws including scafoldings of any height complete all as specified and directed.

S & F hot rolled mild steel of grade E 250 quality A conforming to IS 2062: 2011 as in joist, channel, angle, flat iron or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed.

Dismantling of ceiling board (Plup insulation or insulation etc) or insulation board any thickness including cover fillet and grid frame work complete all as specified and directed.

Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200mm c/c in both directions using 3.0mm thick pre-straightened GI wire. laying 595 x 595 x 6mm thick E-Board Designer ceiling fixing 600mm x 600mm x 6mm grid (Frame work) etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exc 4 Sqm each complete all as specified and directed.

S&F Solid single PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, edges will be painted to match with prelam sheet suppling & fixing in opening as per specification & drawing including all fixtures shown on drawing complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0 bent edge, Paneling of 2mm thick prelam PVC sheet on bothfaces i.e front face & back face with particle board core to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, and including all hardware necessary for a door supplying & fixing in the frame at site as per specification & drawing. given SSR 2010 complete all as specified and directed.

S&F pressed steel door frames of size 125 x 60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified directed.

S&F Factory made, 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35mm thick complete all as specified and directed.

S&F Factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass/ gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I section 8.20 (a), complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; complete all as specified and directed.

M&L for PCC 1:3:6 Type C1(20mm graded aggregate) as in bed block for holdfast and filling door frame complete all as specified and directed

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 100mm size of Butt hinges, medium weight cold rolled mild steel complete door etc complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section with 100mm long bolt, complete all as specified and directed.

S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed

S&F Extruded aluminium alloy handles fabricated type anodised 100mm size complete all as specified and directed.

M&L for floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, 140mm long, fixed in floor complete all as specified and directed.

S&F hasp and staple 125mm, safety type, aluminium anodised with alu hinge pin incl bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L for preparation of new steel or iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, comlete, complete all as specified and directed.

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of filler coat with grey filler or liquid wood filler, transparent, and bringing forward surfaces to smooth even finish, complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and directed.

M&L for stainless steel wire cloth, 0.71mm nominal dia of wire and average width of aperture 1.20mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.

M & L for Resecuring or easing and adjusting door shutters of any size and any description without taking down shutter from frame complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F of Powder coated aluminum three track sliding shutters consisting two Glazed shutters and one guazed shutters (with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces with brick work and plaster as required at site:- (i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick. (ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm. (iii) Aluminium glazing strip of size 18.2 x 16.66mm. (iv) 4 to 5mm thick float glass superior quality make Modi float for two shutters. (v) IDPE rubber gasket for fixing glass. (vi) Locking cleat per shutter - 01 No. (vii) Two nos sliding rollers per shutter. (viii) Rubber shock absorber - 03 No per shutter. (ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter. (x) Fixing screws for frame with wall - 06 No per window.

S & F Powder coated Aluminium ventilator, fixed type without sash bar, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc. including 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion complete all as specified and directed.

M&L for in repair Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 etc complete all as specified and directed.

M&L for 4mm thick sheet glass ordinary quality in panes n.exec 0.5 sqm in each pane fixed with & including glazing with oil putty complete all as specified and directed.

S& F 18mm thick factory made PVC sheet one side pre laminated sheet kitchen cabinet shutter/ cupboard shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for making edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bodning etc complete all as specified and directed.

S&F factory made PVC shelf/ partition of required size consisting of panel of 12mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provide 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the fronth of the self/ partition to be edge lipped by 18mm width x 1mm thick PVC sheet of density 600kg/cum manufactured by ISO 9001-2015 Certified company using solvent cement etc complete all as specified and directed.

Supply and fixing in of Partial overlay/ fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/ silver complete all as specified and directed.

S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed.

S&F 100mm size MS mat/ glossy finish handle complete all as specfied and directed.

S&F modular type stainless steel cutlery basket size 20 x 19 x 4 inches (dia of wire not less than 3.00mm) of any shape withside corrosion resistance telescopic drawer channel on both side fixed with steel screws incl all fixing arrangements complete all as specified and directed.

All as per Srl item No.38 above but cup and saucer basket size 20 x 17 x 4 inches complete all as specified and directed.

All as per Srl item No.38 above but plain basket size 20 x 19 x 6 inches complete all as specified and directed.

All as per Srl item No.38 above but grain basket size 20 x 17 x 6 inches complete all as specified and directed.

All as per Srl item No.38 above but thali basket size 20 x 19 x 8 inches complete all as specified and directed.

All as per Srl item No.38 above but plain basket size 20 x 17 x 8 inches complete all as specified and directed.

S&F 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F repair stainless steel curtain rod with brackets 25mm dia including necesary SS clamp complete all as specified and directed.

M&L in fixed in repairs 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured epoxy grout for tile joint including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured epoxy grout for tile joint incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Glazed Coloured ceramic tiles (textured and designed as required) in vertical surfaces size 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured epoxy grout for tile joint incl 10mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L for Granite slabs (of any type) 20mm thick machine cut bedded laid over cement screed 15mm thick in CM 1:4 laid and jointed with grey cement slurry and pointed with white/ coloured epoxy grout for tile joint with admixture of pigment to match the shade of slab and polishing complete all as specified and directed.

Rounding to edges of stone slab slab one edge such as in steps, cooking platform, and other similar situation complete all as specified and directed.

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F Plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair vitreous china sqatting pan (orissa pattern) size 580mm x 440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, Fixed in repairs, complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair Vitreous China wash basin, angle back, size 550 x 400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair angular stop valves, cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair Long body CP Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Brass CP wall mixer 3-in-1 for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair Brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed complete all as specified and directed.

S&F in repair chromium plated shower roses 125mm sizes with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair of size PVC mirror cabinet complete all as specified and directed

M&L in repair for Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe 1.25 M long flexible tube and ABS wall Hook including making connection and fixed in position complete all as specified and directed.

Taking down old GI tubing ISI marked medium grade 15mm bore with all fittings including connection etc, complete all as specified and directed.

Taking down old GI tubing ISI marked medium grade 20mm bore with all fittings including connection etc, complete all as specified and directed.

Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.

Supply and Fixing of CPVC brass elbow 20mm dia SDR-11 on wall/ ceiling or laying in floor complete all as specified and directed.

Supply and Fixing of CPVC brass Tee 20mm dia SDR-11 on wall/ ceiling or laying in floor complete all as specified and directed

Supply and Fixing of CPVC brass Male brass Adeptor (MTA/ MBTA) 20mm dia SDR-11 on wall/ ceiling or laying in floor complete all as specified and directed

Supply and Fixing of CPVC Ball valve 20mm dia SDR-11 on wall/ ceiling or laying in floor complete all as specified and directed.

M&L for GI tubing ISI marked medium grade 25mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified and directed.

Cutting chases for concealed water tubing in brick wall and making good in CM 1:3 cutting n.exc 10cm girth. complete all as specified and directed.

S&F in repairs incl hoisting HDPE plastic water cylindrical vertical type tanks closed top of capacity 1000Ltrs incl 20mm bore brass stop cock and 20mm bore brass float valve with polythene float including removing the existing one complete all as specified and as directed.

S&F in repair SS Sinks with drainage board in repair made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and including waste pipe complete all as specified and directed.

S & F in repairs PVC (SWR) Floor trap/ Nahani trap plain or multi with stainless steel grating incl joinig to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and directed.

S&F in repair CP WHB mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed.

Demolition of stone, brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone Work etc. complete all as specified and directed.

M&L for Brick work with sub-class 'B' burnt bricks, straight or curved on plan exceeding 6 M mean radius built in half brick wall bulit in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with sub-class 'B' burnt bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for 15mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement all as specified incl mixing with water proofing compound as per manufacturers instruction complete all as specified and directed. (WPC shall be measured and paid separately).

Supply only liquid water proofing compound complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old surfaces and applying two coat Acrylic emulsion with roller over applying primer and including minimum 1mm thick white wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed (Note:- primer and emulsion paint shall be carried out through air less spray machine (Mechanical means)

M&L for preparation of newly plastered surfaces and applying two coat Acrylic emulsion with roller over applying primer and including minimum 1mm thick white wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed. (Note:- primer and emulsion paint shall be carred out through air less spray machine (Mechanical means)

M&L for complete removal of existing treament and preparation of wall, washing, scrubbing down and stopping old treatment and painted surface of plastered/ decorated surface and applying two coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall putty complete all as specified and directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site and painting will be done by brush/ spray/ roller).

M&L for newly plastered surfaces and applying two coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall putty complete all as specified and directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site and painting will be done by brush/ spray/ roller).

Jamna Constructions (BID ID -3420823)

sunway associates (BID ID -3422298)

r.s.jain & sons (BID ID -3422499)