NAME OF WORK-Stage renovation work at Gandhi stadium WARD NO-35 in NAGAR NIGAM BEGUSARAI

Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottom. Lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kind of soil as per specification and direction of E/I.

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.

Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:2:4 (1 Cement: 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, inishing and reinforcement-All work upto plinth level in 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)

Reinforced cement conrete work in beams, suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforement with 1:1.5:3(1 cement:1.5 coarse sand:3 graded stone aggregate 20 mm nominal size).

Brick work with bricks of class designation 100A in foundations and plinth in :Cement mortar 1 .:6(1 cement: 6 coarse sand )

Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor V

Centring and shuttering including strutting,propping etc. and removal of form for.Foundations, footings, bases of columns etc. for mass concrete

Centring and shuttering including strutting,propping etc. and removal of form for.Lintels, beams, plinth bams, griders, bressumers and contilevers.

Centring and shuttering including strutting,propping etc. and removal of form for Columns,Pillars, Piers, Abutments, Posts and Struts

12 mm cement plaster of mix: 1:3 (1 cement:3 coarse sand) with WP material

6 mm cement plaster to ceiling of mix :1:4(1 cement: 4 coarse sand)

Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stoneaggregate

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying marble flooring of 18 mm thick laid on 20 mm thick Cement motar 1:3 (1 cement: 3coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required. In gratings, frames, guard bar, ladders, railings, brackts gates & similar works.

Providing and fixing 1 mm thick M.S. sheet door with frame of40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings complete jncluding applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece.

Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars TMTC-500-

Total carriage Amt.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 15 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).

Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all

Particular

Wiring for light point/fan/exhuast fan/call bell point with 1.5 sq.mm pvc insulated copper cond.single core cable in surface/ recessed pvc conduit with piano type switch phenolic laminated sheet suitable size pvc/G.I.box as reqd.

Wiring for power plug with 2x4 sq.mm PVC insulated copper cond.single core cable in surface/recessed PVC conduit along with 1 No.4 sq.mm PVC insulated copper cond;single core cable for loop earthing as reqd.

S/F suitable size G.I.PVC box on surface or in recess with phenolic laminated sheet cover in front in including P/F 6 pin 15/16 amps.socket outlet and 15/16 amps piano type switch connection painting etc.as reqd.

S/F/F 5/6 amps one way switch piano type on the existing switch box/cover including connection as reqd.

S/F/F 6 amps. 5 pin socket outlet on the existingswitch box/cover including connection etc.as reqd.

Wiring for circuit/submain wiring along with earth wire with PVC insulated copper cond.single core cable in surface / recessed PVC conduit as reqd.

S/F 2 pin 5 amps.ceiling rose on the existing iunction box/pvc box including connection as reqd.

S/F batten angle holder including connection etc.as reqd.

Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. 10/12 watt LED lamp

Supplying and installation of 300 mm, 230 volt AC Exhaust fan in the existing opening including making good the damage, connection testing, commissioning etc as required.

S/F 4'x 40 watt single box type flourescent tube light fitting including connection with 1.5 sq.mm pvc insulated copper conductor cable etc.as reqd.

Installation, testing and commissioning of pre-wired flourescent fitting of all types complete with all accessories and tube etc.directly on ceiling wall,including connection etca s reqd.

Supply and installation of regular/standared mmodel AC ceiling fan of 1200 mm sweep including wiring the down rods of standard length upto 30 cm with 1.5 sq.mm FR PVC insulated copper conductor etc as required.

Installation, testing and commissioning of ceiling fan including wiring the down rods of standard length (upto 30cm) with 1.5 sq.mm insulated , copper cond. single core cable etc. as reqd.

Supplying and fixing following Retrofit CFL type street light fitting with sheet aluminium housing, clear acrylic cover and all accessories including Retrofit CFL lamp etc. on pole/building includingconnection with FR PVC insulated copper conductor cable and earthing the body etc. as required. With 85 watt Retofit CFL lamp

S/F Ding Dong call bell suitable for D.C/A.C single phase 230.complete as reqd.

S/F 3 pole sheet steel MCB distribution board 415V.on surface/ recess complete with copper bus bar, earthbar din bar, detachable gland plate, interconnections phosphatized and powder painted including earthing

S/F/F MCB distribution board 240V.on surface recess complete with copper bus bar Din bar, detachable glandplate, inerconnection,phosphatized & powder painted including earthing etc.as reqd.

S/F/F 6-32 amps.MCB 'B' Sereis S.P.miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB.complete with connection testing and commissioning etc.as reqd.

S/F/F 63 amps.4 pole 240V.Isolator in the existing MCB DB.complete with connections, testing and commissioning etc.as reqd.

S/F/F 40 amps.double pole 240V.Isolator in the existing MCB DB.complete with connections, testing and commissioning etc.as reqd.

Earthing with G.I.earth pipe 4.5 mtr long, 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.as reqd.

S/L 6SWG copper wire at 0.50 meter below ground level for conductor earth electrode including soldering etc. as reqd.