Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.8 LAccepted-AOC | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹10.5 L+₹40,030.50 (3.98%)Rejected-AOC | L2 | Rejected-AOC Other than the lowest bidder | |
| 3 | L3₹14.4 L+₹4.3 L (42.8%)Rejected-AOC | L3 | Rejected-AOC Other than the lowest bidder | |
| 4 | L4₹14.9 L+₹4.8 L (47.9%)Rejected-AOC H NO 1395 SECTOR 21 PANCHKULA 134112 HARYANA | PANCHKULA | HARYANA | 134112 | L4 | Rejected-AOC Other than the lowest bidder |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
21 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE JUTOGH
GE JUTOGH, JUTOGH CANTT SHIMLA (HP) - 171008
CERTAIN MISC BLDGS REPAIRS IN THE AREA OF KELVIN GROVE UNDER GE JUTOGH
2022_MES_527522_3
GE/JUT-09 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
KELVIN GROVE (SHIMLA)
CLASS E CATEGORY a (i)
6 documents required · 6 mandatory
₹500
GE JUTOGH
₹20,000
Yes
29 Jul 2022
30 Jun 2022
23 Jul 2022
30 Jun 2022
21 Jul 2022
7 Jul 2022
Amount
Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc, of any height (G Floor to 3rd Floor) including necessary scaffolding and T&P required to complete the work complete all as specified and as directed.
Demolition of brick or stone masonary built in cement mortar incl all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete block, at any height complete all as specified and directed.
M & L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6 complete all as specified and directed.
M&L for brick work with sub class 'B' brick in cement mortar 1:4, straight or curved on plan to any radius in half brick thick wall built complete all as specified and directed.
M&L for rendering 15 mm thick in CM (1:6) on brick work or concrete surfaces finished even and smooth complete all as specified and directed.
M&L for rendering 15 mm thick on other than fair surfaces of brickwork or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement mixed with WPC as per manufacturer instructions, of any height (G Floor to 3rd Floor) including necessary scaffolding and T&P required to complete the work complete all as specified and directed. Note: WPC shall be measured and paid separately.
M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over and incl a coat of primer and putty 1-2 mm thick on walls complete all as specified and directed.
M&L for preparing of new plastered surface walls and applying two coats of weather proof paint on external surfaces over and including a coat of alkali resistant priming paint at any height including necessary scaffolding etc. complete all as specified and as directed.
Supply only Liquid water proofing compound complete all as specified and directed.
Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for rendering/screed bed 15mm thick in CM 1:3 in (Sunken slab) mixed with and incl water proofing compound as per manufacturer instruction's surface shall be finished even and smooth without extra cement complete all as specified and directed.
M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm icluding cleaning surfaces etc complete as in sunken portion complete all as specified and directed.
M & L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in filling and mass concrete complete all as specified and directed.
S & F 1.5mm thick PVC tiles/sheets, laminated plain coloured, marbled mosaic or mottled finish, homogeneious laid with approved rubber based adhesive in floors (incl dismantling of old PVC sheet from floor and removing from site) complete all as specified and directed.
Demolition of cement concrete in ground floors or pavings n.exc 15cm thickness below or above ground level complete all as specified and directed.
M &L 75mm thick for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection & paving finished even & smooth without using extra cement complete all as specified and directed.
M&L 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in subbase of flooring complete all as specified and directed.
M & L for chequered cement concrete tiles rubber moulded pre polished with lacquar finish 30cmx30cm x 22-25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment laid over and incl 20mm thick screed bed in CM 1:6, complete all as specified and directed.
M & L for Machine pressed precast concrete interlocking paver block with lacquer finish pre polished glossy finish of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment set over and incl sand cushioning as per site requirement complete all as specified and directed.
M&L for sand filling under floor or in foundation including spreading levelling in layers n exc 25 cm thick, well ramming, watering and consolidation complete all as specified and directed.
Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises complete all as specified and directed.
M & L for 25mm thick PCC 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate as in sub base orf floor finished rough complete all as specified and directed.
M & L for vitrified ceramic tiles light shade (square / rectangular) of 8 to 9mm thick, of size 600x600mm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and incl 15mm thick screed bed in CM (1:6), complete all as specified and directed.
M & L for vitrified ceramic tiles light shade (square / rectangular) of 8 to 9mm thick, of size 600x600mm as in skirting, dado and riser to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles fixed over and incl rendering 10mm thick in CM (1:4) complete all as specified and directed.
M&L for non skid ceramic tiles 7-8mm thick coloured (Square/rectangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 15mm thick screed bed in CM (1:6), complete all as specified and directed.
M&L for glazed ceramic tiles joint free in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm, 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and incl 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Demolition of stone slabs and tiles of any description laid beded and pointed in any mortar or thickness in floors, aprons etc. complete all as specified and directed.
M & L for granite (of any type) 19-20 mm thick one side machine polished in steps, jambs, pillars, window Cills, and top of kitchen platform and top of counter top wash basin etc set and jointed in neat cement slurry and pointed with coloured cement to match fixed over and incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for machine cut pre polished Kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for pre polished Machine cut Kota stone slab flooring 18-20mm thick in skirting/dados and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing fixed over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for Rounding to edges of stone slabs one edge, such as in, cooking platform, and other similar situations complete all as specified and directed
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets or GI grid frame work complete all as specified and directed.
M&L for 4mm thick non asbestos fibre cement building boards (E- board self-design with PVC coating) fixed or laid /inserted to timber/GI/Aluminium frame work with screws in ceiling flat or sloping complete all as specified and directed.
M&L for GI frame work (bottom pre painted and puetyelene coated) of size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.
M&L for Hangers 4 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition)of any description and in any position not otherwise specifically provided complete all as specified and directed.
M & L for RCC 1:2:4. type B-1, using 20mm graded crushed stone aggregate as in columns/beams/slab, landings, chajja and in shelves and the like complete all as specified and directed.
M&L for formwork flat rough finished surfaces of concrete to soffits of suspended slabs, roof slabs, landings and similar work not exc 200mm thick complete all as specified and directed.
S&F TMT bar 10 mm dia and over cut to length bent to shape required including cranking, binding spirally hooking end and binding with MS wire annealed not less than 0.9mm dia complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed.
S&F pre-engineered galvalume aluminium zinc coating GI based profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.
Fixing only pre-engineered galvalume aluminium zinc coating GI based profile steel sheet 0.50 mm thick as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed. Note: Old Sheet obtained from dismantling shall be reused.
S&F pre-engineered galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.
S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer /self tapping screw complete all as specified and directed .
Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.
S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors frame; ladders; framed balusters; walk ways; railings’; weldmesh, framework of water tanks and similar work conforming to Fe-290. Gde-E-165. complete all as specified and directed.
S & F rolled section as in framing for cladding, glazing and the like fixed with angle/Rectangular or Square pipe cleats and connecting plates etc of Gde Fe-410-W (Gde-E250 quality-A for sheet fixing complete all as specified and directed.
Taking down chowkat or frames with shutters withoutout taking off shutters from the frames) n exc 1.5 Sqm each complete all as specified and directed.
Taking down chowkat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified and directed.
S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.
M&L for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
M&L for PCC 1:3:6, type C-1, (using 20mm graded crushed stone aggregate) as in coping, block for hold fast block or similar work and finished the surface with existing and including form work complete all as specified and directed.
S&F Aluminium anodised powder coated sliding type three track window with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass, size of frame 93.00 x 31.75 x 1.3 mm thick for top and sides, 93.00 x 31.75 x 1.3 mm thick, bottom and shutter frame 38 x 18 x 1.5 mm thick., Aluminium grill 6 mm dia design No DG-102 make DEDO grill or design No A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick including necessary handles, tower bolts, stopper etc complete all as specified.
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F flush shutters, 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 35mm thick, IInd class hard wood (factory made) glazed and skeleton shutter open rebated and prepared to receive glass gauge etc edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/ gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.
S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and directed.
S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads, including necessary scaffolding etc. complete all as specified and as directed.
S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or wooded bead/aluminium clip built in squares exceeding 0.5 sq.m in each pane, including necessary scaffolding etc. complete all as specified.
S & F figured glass ordinary quality 4mm thick glazing in square/ rectangle n.exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden frame at any height including necessary scaffolding etc. complete all as specified and directed.
S&F mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long complete all as specified and directed.
S & F 300mm ordinary rat rail pattern springs including roller and roller plate complete all as specified and directed.
S&F aluminium extruded alloy handles fabricated type anodised 150mm long complete all as specified and directed.
S&F butt hinges medium weight cold rolled mild steel of 100mm size complete all as specified and directed.
S&F Butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodisedand fixed, type B-21 complete all as specified and directed.
S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified and directed.
S&F aluminium anodized barrel tower bolt of extruded section of size 150mm long complete all as specified and directed.
S & F floor door stoppers 140mm of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floors complete all as specified and directed.
M&L for preparation of new or previously untreated wood or wood based surface not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Taking up or down 15mm bore, steel water tubing & connections complete all as specified and directed.
Taking up or down 20 bore, steel water tubing & connections complete all as specified and directed.
S&F in repair grating doom 100mm dia of PTMT (Minimum weight 25gms) with CP grating complete all as specified and directed.
Refixing old steel tubing 15mm dia and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and directed.
Refixing old steel tubing 20mm dia and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and directed.
S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 15mm bore complete all as specified and directed.
S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 20mm bore complete all as specified and directed.
S & F in repair 15mm bore concealed stop valve fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for unions pipe complete all as specified and directed.
S & F in repair 15mm bore CP bib tap fancy type long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F in repair 15mm brass CP wall mixer for mixing hot and cold water with hand shower complete all as specified and directed.
S & F 15mm brass CP basin/ sink mixer for mixing hot and cold water complete all as specified and directed.
S& F in repairs 15mm size PVC connection pipe with PTMT nuts of length 600mm long complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan padestal pattern white with and incl inbuilt flushing cistern, flush pipe and all fittings, P/S trap fixed with brass screw complete all as specified and directed.
S&F in repairs vitreous China wash basin pedastal pattern super white/ colour of size 560x475mm including all fittings, decorative type, complete all as specified and directed
M&L 20 mm dia mild steel coloured PVC coated fancy curtain rod complete all as specified and directed.
M&L for mild steel coloured brackets including PVC designer dom for curtain rod complete all as specified and directed.
S&F in repair CP brass jet spray (health faucet) with flexible pipe 1.50m long fixed to EWC suitable for 15mm bore of pipe complete all as specified and directed.
S & F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastecoupling/waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F steel rolling shutters made of 1.25mm thick laths, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type including taking down unserviceable rolling shutter complete all as specified and directed. Note: Safety liver lock and ball bearing shall be measured and paid separately as supply only.
Taking down existing unserviceable steel rolling shutters of any type and size and refixing the same after necessary repairs and make the rolling shutter fully functioning complete all as specified and directed. Note: Safety liver lock and ball bearing shall be measured and paid separately as supply only.
Supply only safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.
Supply only ball bearing for rolling shutters complete all as specified and directed.
S&F in repairs 32mm dia, PVC waste pipe for wash hand basin and kitchen sink of length 900mm long with PTMT nuts, complete all as specified and directed.
JASWANT SINGH ANAND
Rajesh Agencies
R B TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .