PROVISION OF CERTAIN LBW AND REVENUE WORKS UNDER GE 865 EWS AT LEH

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil complete all as specified and directed. (65.16+20.25+24.3+197.44+19.44)

M&L PCC 1:4:8 Type D2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. (7.39+4.05)

M&L Precast cement concrete solid blocks masonary PCC 1:3:6 type C1, using 20 mm graded crushed stone aggregate & set in cement motar 1:6 complete all as specified and directed. (20.58+27.96)

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. (34.25+7.29+15+143.03+11.6)

Removal excavated material exc 250m and n.exc 500m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

M&L for Reinforced Cement Concrete (design mix) M-25 using 20 mm graded crushed stone aggregate for plinth beams and mass concrete complete all as specified and directed. (3.2+2.03)

M&L for Reinforced Cement Concrete (design mix) M-25 using 20 mm graded crushed stone aggregate for roof beams and mass concrete complete all as specified and directed.

M &L for Formwork to sides of concrete foundations, footings, bases of columns, plinth beams fair finished complete all as specified and directed. (125.04+13.5)

M &L for Formwork to sides and soffits of floor or roof beams, fair finished complete all as specified and directed.

S&F for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. (1776.42+239.76)

All as per item No. 11 above here-in- before but up to and including 6 to 8 mm dia in stirrups, spacers and binders as in columns and beams etc complete all as specified and directed. (1160.9+55.44)

M &L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions fair finished complete all as specified and directed.

M&L for RCC M-25(Design Mix) using 20mm graded crushed stone aggregate in lintels over 1.5m span complete all as specified and directed.

M&L Cement concrete type B1(1:2:4) using 20mm graded crushed stone aggregate in lintels upto 1.5m span complete all as specified and directed.

M&L for Hardcore of guage exc 63mm but nexc. 100 mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for laying 100mm thick PCC, type B- 2, (1:2:4) using 40mm graded crushed stone aggregate as in sub base or floor complete all as specified and directed.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes etc complete all as specified and directed.

M&L rendering 15 mm thick in cm 1:4 on fair faces of concrete or brick surfaces as in wall finishes even and smooth without using extra cement, complete all as specified and directed.

M&L rendering 15 mm thick in cm 1:4 on other than fair faces of concrete or brick surfaces as in wall finishes even and smooth without using extra cement, complete all as specified and directed. (93.78+226.16)

M&L rendering 5 mm thick in cm 1:4 on ceilings of concrete or brick surfaces as in wall finishes even and smooth without using extra cement, complete all as specified and directed.

M&L Virified Ceramic tiles double charged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for PCC type C-2(1:3:6) using 40mm graded crushed stone aggregate in plinth protection, finished even and smooth as mass concrete and filling of foundation complete all as specified and directed.

M&L for two coats distember over a coat of primer on plastered surface of any description, including preparation of new plastered surface complete all as specified and as directed.

M&L for two coats of cement based paint over a coat of primer on plastered surface of any description, including preparation of new plastered surface complete all as specified and as directed.

M&L for two coats distember over a coat of primer on ceiling of any description, including preparation of new plastered surface complete all as specified and as directed.

S&F Anodised powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for plain sheet glass 4.80mm thick ordinalry quality and glazing with oil putty or wooden beads in square or fixed with aluminium section including rubber beads not exc 0.50 sqm in each pane complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10cm in width or girth, not other wise decribed and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for 2nd Class softwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S & F 35mm thick 2nd class softwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

M&L for preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

S&F Extruded aluminium alloy handles 150mm long, fabricated type, anodised complete all as specified and directed.

S&F Butt hinges 100mm long , heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts 125mm long of extruded section and fixed complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts 100mm long of extruded section and fixed complete all as specified and directed.

S&F 1000 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S & F 3-layer PP-R Polypropylene random copolymer) concealed pipes 25 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F 75/110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75 mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110 mm dia PVC (SWR) 'S' trap complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with seat cover complete including provision of lime concrete complete all as specified and directed.

S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F Vitreous China wash basin, white, flat back, size 580x450mm (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F Chrominum plated Bib taps 15 mm dia, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F Stop valves 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F hand shower (health faucet) brass, CP, polished with 8 mm dia. 1.2 Metre long flexible tube and wall hook complete all a specified and directed.

S & F toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all a specified and directed.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all a specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all a specified and directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all a specified and directed.

M&L waste fittings 32mm brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all a specified and directed.

S&F 750 mm long, 32/40 mm dia, PVC plain waste pipe for sinks/wash hand basins complete all as specified and directed.

S& F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all a specified and directed.

S&F 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all a specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all a specified and directed.

S&F PP-R Gate valves 25 mm dia (brass insert) as per requirement of the site complete all a specified and directed.

S&F stop valves, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all a specified and directed.

S&F PP-R Ball valves 25 mm dia (brass insert) as per requirement of the site complete all a specified and directed.

S&F Nipple suitable for HDPE water tank. (Minimum weight 15mm-38gms/20mm- 45gms /25mm- 65gms) complete all a specified and directed.

S&F 75mm bore PVC (SWR) pipe bends ISI marked any radius complete all a specified and directed.

S&F 110mm bore PVC (SWR) pipe bends ISI marked any radius complete all a specified and directed.

M&L PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate to concrete bed to 100 mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all a specified and directed.

Removal of excavated material nexc. 50m and depositing where directed at a level nexc 1.5 m above the startig point complete all a specified and directed. (12.96+6+59.85+7.84)

M&L for providing cement concrete in coping type B-0 (1:2:4) using 12.5 mm graded crushed stone aggregate complete all a specified and directed.

M&L for preperation of new concrete/plastered surface of any description and applying two coats of whitewash complete all as specified and as directed.

M&L for 40mm dia MS ERW pipe heavy grade Class 'C' complete with welded ends laid in ducts over the angle iron supports/fixed on the walls including fittings complete all as specified and directed. (Note : The item rate is inclusive of cutting to any levels/shapes like elbows, tees, bends etc, welding joints wherever necessary as per the site requirement)

M&L for 32mm dia MS ERW pipe heavy grade Class 'C' complete with welded ends laid in ducts over the angle iron supports/fixed on the walls including fittings complete all as specified and directed. (Note : The item rate is inclusive of cutting to any levels/shapes like elbows, tees, bends etc, welding joints wherever necessary as per the site requirement)

M&L for 25mm dia MS ERW pipe heavy grade Class 'C' complete with welded ends laid in ducts over the angle iron supports/fixed on the walls including fittings complete all as specified and directed. (Note : The item rate is inclusive of cutting to any levels/shapes like elbows, tees, bends etc, welding joints wherever necessary as per the site requirement)

S&F Inlet/outlet forged brass ball valve 25 mm with Y Stainer for FCU, hot water for -25 to 90 degree temperature as per existing, including supply and fixing GI nipple of size 3/4 inch including welding work, cutting the existing rusty unserviceable MS/GI nipple complete including taking out existing unserviceable valve complete all as specified and directed.

Supply and fixing Chilled/Hot water wall mounting indoor type Fan Coil Unit 600/1.5TR (CFM/TR) Capacity including 02 Nos of 20mm valve with stainer (inlet&outlet) including heavy duty PVC pipe for connection complete all as specified and directed.

Supply and laying GI pipe “Medium class”, including fittings 25 mm (1”) dia complete all as specified and directed.

S&F gun metal, globe or gate valve ISI marked cast with iron wheel head, screwed both ends for iron pipe and fixed for 25 mm dia bore complete all as specified and directed.

Supply and fixing 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Supply and fix ball brass valve 25mm high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

M&L for Point wiring for one light point or fan point or bell point controlled by one switch with PVC insulated FRLS copper conductor stranded cable of size 1.5 sqmm and including PVC casing/caping terminated in existing sunk CI/ pressed steel terminal boxes for fixing and 1.5 sqmm PVC insulated copper wire as earth wire connected to earth wire connected to earth folly and 3.00mm thick plastic lamiated sheet cover complete all as specified and directed.

All as per item No. 86 here -in-before but 1.5 sqmm for one 3 pin 5 Amps socket outlet including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly on same board complete all as specified and directed.

All as per item No. 86 here -in-before but 1.5 sqmm for one 3 pin 5 Amps socket outlet independent including 1.5 sqmm insulated copper wire as earth wire to the same earth dolly complete all as specified and directed.

M&L for point wiring for 3pin 15 Amps socket outlet independent with copper conductor cable PVC insulated multistrand 2.5 Sqmm with 1 .5 sqmm PVC copper conductor as earth wire connected to earth dolly and including PVC casing/caping with sunk cast iron complete all as specified and directed.

M & L for Modular Switch one way single pole 6 Amp 1 Module 240 Volts complete all as specified and directed.

M & L for Modular Switch one way single pole 16 Amp 1 Module 240 Volts complete all as specified and directed.

M & L for Modular Bell push, flush type, 5 amp 1 Module 240 Volts complete all as specified and directed.

S & F Modular Sockets 6 A 2/3 Pin combined 2 module 240 Volts complete all as specified and directed.

S & F Modular Sockets 6/16 Amp 2/3 Pin combined 2 module 240 Volts complete all as specified and directed.

S & F for Modular white cover plate with frame 3 module complete all as specified and directed.

S & F for Modular white cover plate with frame 4 module complete all as specified and directed.

S & F for Modular white cover plate with frame 6 module complete all as specified and directed.

S&F ceiling rose surface bakelite two or three terminal all as specified and directed.

M&L for Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed.

Supply and fixing surface/wall mounted LED fittings with LED tube 20 watts, 6000K capacity decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 4 feet long type bracket including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose/PVC connector to light fittings complete all as specified and directed.

Supply and fixing surface/wall mounted LED fittings with LED tube 10 watts, 6000K capacity decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 4 feet long type bracket including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose/PVC connector to light fittings complete all as specified and directed.

S&F in replacement sheet metal enclosure SPN DBs with 200 Amps rated bus bar of 8 way 240 volts with blank plate double door complete all as specified and directed.

S&F in replacement MCB SPN 63 Amps 10 KA, 'C' series complete all specified and directed.

S&F in replacement of MCB SP 6 to 32 Amps 'C' series complete all specified and directed.

S&F sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 4 Sqmm along with one run of 4 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire complete all as specified and directed.

Supply and laying PVC insulated, heavy duty, LT XLPE galvanised steel strip or wire armoured electric power cable of size 16 Sqmm, 4 core with stranded aluminium conductor 1100 Volts grade, jointed with cable glands, lugs etc., laid in trenches/drawn through pipe, complete all as specified and directed.

M & L for sand cushioning to protection of underground cables, laid 8 cm before laying and 15 cm after laying of cable, and punned to form an overall layer of 18 cm thick, complete all as specified and directed. Note: Punned thickness shall be measured and paid. (5.67+47.39+5.83)

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type-I, flat, size 250mmx150mmx40mm, complete all as specified and directed. (420+480)

S&L Galvanized iron tubing 'light grade' 40 mm bore, with all fittings, laid in trenches or under road crossing as protection pipe, or fixed alongwith walls/poles with clamps including bolts, nuts & washers, including taking down old steel tubing and connections complete all as specified and directed.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts grade, of size 3 core 185 sq mm complete all as specified and directed.

M & L for Earthing complete with galvanised iron earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected using galvanised iron strip 32×6mm as earthing leadby means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed by Engineer-In-Charge. Note: Earth pit chamber and RCC pit cover shall be painted with two coats of red synthetic enamel paint over one coat of primer including preparing of surfaces.

Supply and fix cable jointing kit for 11 KV grade cable for in door termination, heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Aluminium conductor cable of size 185 sqmm complete all as specified and directed.

Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination, heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Aluminium conductor cable of size 185 sqmm complete all as specified and directed.

Supply and fix triple pole, 6600 volt mechanically operated, mounted on insulator and steel frame, with operating mechanism worked from ground level, for current rating upto 200 amps complete all as specified and directed.

M&L for factory made, machine pressed, unreinforced, pre-cast concrete cable cover class HV type-I flate size 300mm x l80mm x 40mm, complete all as specified and directed.

M& L of GI Pipe light grade for cable protecton in road crossing of size 100 mm dia complete all as specified and directed.

Horizontal boring in soft/loose soil/under roads of any width by manual arrangements for inserting GI pipe up to 100mm bore for passing cables complete all as specified and directed. Note : GI pipe shall be measured and paid separately.

Supply, Laying, jointing & testing in trenches or passing through pipe or fixed on surface XLPE insulated, armoured, heavy duty electric cable with aluminium conductor 240 Sqmm 3.5 core, 1100 volts grade complete all as specified and directed.

S&F of tubes light grade of size 80 mm dia galvanised with all fittings and fixed complete to walls and ceiling or laid in treanches, fixed on pole /under road crossing or passing through gutters etc including necessary road cutting and making good with PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) complete all as specified and as directed.

Supply and fixing OFF Load Change Change over ( Side Handel) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 400 Amps with connecting acessories complete all as specified and directed.

M&L for earthing complete with galvanised iron earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with 25x4 mm size GI strip as earth lead, by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed.

M&L for automatic digital servo voltage satblizer, 3 Phase, 300 KVA for automatic operation , three phase suitable for unbalanced input load and provide balanced out put in each phase naturally oil colled indoor/outdoor type & designed input voltage 130-280 Volt, 50 c/S A/C between any phase to neutral correspond to 400 V + 1%, 50 c/S AC between any phase to neutral correspond to 400V + 1% Phase to phase complete inclusive of time delay relay (TDR Protecting device, Bulk & boost transformeer in each phase, with power transformer oil equipped with most advance power technology 270V to 460 Volts with out put voltage stabilized at 415 with accuracy + 2.5 % and speed of correction 8 volts per second including installation, testing and commissioning all as specified and directed by Engineer-in-charge. Tech Specification :- Drive : Direct AC drive for fastest voltage correction and durability (without any chain, Spockets and rail of pulleys) Controls : All the three phase controlled individually for better voltage and load management, applicable standards : IS 9815, Input voltage range : 270-460V, Output voltage 415V + 1%, Duty Cycle : Continuous 24x7, Wave for distrortion : Nil, Response time less than 10ms, suitability : suitable for power factor load, cooling : Natural Oil cooled, effeciency : 99%, correction speed : Faster than 60V per Second Major Assembly : 3 Nos copper wound vaiable auto transformers, one for each phase. 3 Nos Heavy duty AC synchronise motors for indl phase correction. 3 Nos copper wound buck/boost transformer. 3 Nos control circuit for indl phase control. Winding & wiring material : Copper EC grade (99.9% pure), Input/Output termination. New Transformer Oil : New insulated transformer oil ISI 335 marked Standard fittings : Two earthing terminals. Cable end boxes for incoming and outgoing side for terminating cables. Oil level indicator, Oil filling hole with cap, lifting lugs and wheels.

M/s B R Constructions (BID ID -3145838)

M/S VINAY KUMAR SHARMA (BID ID -3150421)

M/S BALI CONSTRUCTIONS (BID ID -3145971)

SINGH CONST CO (BID ID -3150427)