REPAIR/ MAINT OF LIFTS AT SANGLI APARTMENT UNDER GE NEW DELHI

Amount

Comprehensive, Periodical and Preventive Maintenance of "THYSSENKRUPP" make passenger lifts, 01 No lift in Block 'C' of capacity- 1000 Kg (G+7), 01 No lift in Block 'B' of capacity- 1000 Kg (G+7) and 01 No lifts in block 'A' of capacity-1020 Kg (G+11), 01 No lift in Block 'C' of capacity 680 Kgs (G+7), 02 Nos lift of make Johnson in Block 'A' , 01 No lift at ECHS Polyclinic Make : Kone, 01 No Lift in block B Make Johnson electrically operated 1.5 meter/second speed with power driven automatic steel sliding doors of single speed and efficient operating condition through manufacturer's instructions by regular examination, lubrication and carrying out planned maintenance of system in controlled manner using techniques and expertise and including Sunday & Holidays complete all as specified and directed at Sangli Apartments. Notes:- (i) The above maintenance shall be done through OEM of existing lifts. Please also refer Sch 'A' Notes. (ii) The contractor will have to submit MOU as given in Particular Specifications from OEM i.e M/s Thyssenkrupp Lifts India/ M/s Johnson Lifts & Escalators /M/s KONE India Ltd within fifteen days of acceptance of tender, failing which the contract will be liable to be cancelled and further action to be taken as per policy in vogue. (iii) Spare parts to be replaced as listed in item Nos 02 to 15 of BoQ /Sch 'A' shall be measured and paid separately as Supply Only. Fixing charge is deemed to be included in unit rate quoted for above item No. 01.

(iv) Oil required in gear box and lubrication shall be provided by the contractor at his own cost of Grade Indian oil, Servo Mesh 320 or Servo System 320 equivalent grade of oil all as approved By Engr-in-charge alongwith cleaning material and contractor shall quoted his rate accordingly. (v) The Replacement of material like car cabin, ceiling frame, panels, hoist way door panels, door frame, car flooring, floor covering,hand resting rails,mirrors,light bulb/tubes,car cabinet key,door unlocking keys in case of loss,sills, main line power switches, breakers, feeders to controller, hoist way wiring, hydraulic jack outer casing, burried piping, alignment of elevator guide rails, smoke and fire sensors, communication devices, security systems, landing doors are not included in the quoted rate. (vi) Any items not covered under as 'supply only' (ie. item No 2 to 15 of BOQ) as well as items other than excluded vide Serial Note No (v) above shall be deemed to be included in the unit rate quoted for the above item for the smooth functioning of lifts and the contractor may quote the rate accordingly. Contractor is expected to inspect the lift before quoting the rate. (vii) Contractor shall be attending complaints round the clock i.e. 24 hrs including Sunday & Holiday. If contractor is not able to rectify the complaint, penalty shall be charged as given below:- (a) Upto 12 Hrs - NIL (b) 12 Hrs - 24 Hrs - Rs 200/- Per Hour per Complaint (c) After 24 Hours - Rs 4000/- Per complaint per day. (viii) All existing earthing of the lift shall be maintained and made fully functional by the contractor at his own cost to the entire satisfaction of the Engr-in-charge & nothing extra will be paid to contractor.

(ix) Contractor shall submit safety security certificate of lifts from OEM in every month as per performa mentioned in perticular specification here-in-after. (x) The OEM will also detail one technician to inspect the lift every week regarding functioning of lift or any other issue arising in the lift. The problem noticed if any shall be informed immediately to JE E/M / Engr-in-charge. In case, no technician detailed, an amount of Rs - 1000/- per week per lift will be deducted from contractor's dues. Technician should always carry necessary service tools during sight visit every week. (xi) The unit rate quoted shall be inclusive of T&P required for carrying out repair, stationary for maintinance of records, uniform for mechanic etc all as specified. (xii) The unit rate quoted by the contractor for the above item shall be deemed to be included for all above provision.

Note:-The following items covered under Comprehensive Maint of Make : Thyssenkrupp/Johnson/Kone :-Repair/Replacement of unserviceable components such as PCBs, LB Card, LOP, COP, DIB Card, door sensor, sight guard, limit switch, single phase preventer, door drive, SMPS, overload device, emergency alarm, worn out gear, thrust bearing, drive sleeve bearing, brake contact, linings, motor winding, rotating elements, relays, solid state components, resistance, condensers, power amplifier, transistors, contacts, VF drive &braking unit, ARD parts, diodes, governor jaws car, hall buttons, car & hall position indicators, car direction indicator, hall lanterns, deflector car and counter weight, guide rails, top and bottom limit switch, battery operated emergency light and alarm system, wiring of all equipments and accessories, reverse phase indicator.

M&L for installation in replacement of car doors with connected header accessories complete all as specified and directed by Engr-in-Charge.

Supply only in replacement cabin fan made of metalic body and copper wounded motor with 3 set of blades of suitable size as per sample up to 350 mm with complete fixing accessories all as specified and directed by Engr-in-Charge.

Supply only in replacement of 5 watts circular type LED light fitting complete suitable for fixing in existing size all as specified and directed by Engr-in-Charge.

Supply only in replacement of 7 watts square type LED light fitting complete suitable for fixing in existing size all as specified and directed by Engr-in-Charge.

Supply only in replacement of 10 watts circular type LED light fitting complete suitable for fixing in existing size all as specified and directed by Engr-in-Charge.

Supply only in replacement 15 Watts bulkhead type LED light fitting complete suitable for fixing in existing shaft size all as specified and directed by Engr-in-Charge. (For shaft area )

Supply only in replacement of Guard rail made of stainless steel and smooth finished surface upto 50 mm dia including its fixing arrangments inside cabin (size as per sample or suggested be Engr-in-Charge ) all as specified and directed.

Supply only in replacement of battery for lift upto 1020 Kg and rating upto (20V & 10 AH ) for UPS system in lift machine room (other rating as per smaple) all as specified and directed by Engr-in-Charge.

Supply only in replacement of Over load device ILC-2 suitable as per existing Make of lift all as specified and directed by Engr-in-Charge.

Supply only in replacement of Infra-red door sensors multi beam with automatically adjusting operating condition suitable as per existing Make of lift all as directed and specified by Engr-in-Charge.

Supply only in replacement of Single phase preventer suitable for existing Make of lift with necessary fixing arrangements and as per existing length suitable for cabin all as directed and specified by Engr-in-Charge.

Supply only in replacement of limit switches suitable as per existing Governor complete all as directed and specified by Engr-in-Charge.

Supply only in replacement of Door Drive suitable as per existing Make of lift all as directed and specified by Engr-in-Charge.

Supply only in replacement of Car CPU card suitable as per existing Make of lift all as directed and specified by Engr-in-Charge. .

Iconic Engineers (BID ID -3374033)

MB Enterprises (BID ID -3377443)