Repairing, providing and fitting of Exhaust system in central kitchen of Main Hospital.

Amount

Providing and fitting of double skin modular construction, draw through floor mounted exhaust air units of 0.6mm thick plain GI sheet from inside and 0.6mm thick pre-plasticized GI sheet from outside with 25mm thick puf insulation with 40kg/m³ density, CFC free in between them. The unit shall be complete with DIDW centrifugal fan backward curved blower (plug fan/belt driven), Squirrel cage induction motor, filtration system capable of entrapping of moisture contents, smoke and oil particles, drain pan, V belt drive, fire proof double canvass connection, drain piping and other accessories as per requirement. The job also includes fabrication, supplying, fixing in position, connecting, testing and commissioning of electrical control panel provided with suitable incoming MCCB/switch fuse unit, voltmeter and ampere meter, contactor, over load relay, push button station, single phase preventer, requisite electrical cabling, etc. All the components shall be housed in 2mm thick MS sheet steel housing. The control panel shall be cubical type, dust and vermin proof, hinged and lockable doors and deed front operation to be positioned at optimum place inside the central hospital kitchen.

i. Air displacement:-6000CFM ii. Static pressure:-80mm of WG. iii. Motor rating:-5H.P. iv. Power supply:415v,3phase, 50Hz

Providing and fitting of 24SWG sheet metal ducts fabricated from galvanizes steel sheets complete with all accessories, straight and smooth finished G.I. flanges with air tight joints for connecting of the ducts, all 90⁰ elbow must be provided with double radius turning vanes, all rectangular duct taps should be made with shoe (45⁰) fittings includes supports for hanging of ducts and shall be in compliance as per SMACNA norms.

M/S STAR NEOTECH ENGINEERS