SPECIAL REPAIRS TO BLDG NO P-23 (C COY COOK HOUSE) 17 GRENADIERS AT MIL STN POKARAN UNDER AGE (I) POKARAN

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge

S&F, Powder coated, anodised aluminium frame & shutter for door, window and ventilator including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, etc complete all as specified & directed by Engineer-in-charge.

M&L for sheet glass 5.5mm thick, ordinary quality and glazing with, rubber packing n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge

--Ditto--as item no -04 but exc 0.5 sqm in each pane complete all as specified and as directed by the Engineer-in-Charge.

S&F Aluminium anodised, barrel tower bolt of extruded section and fix of length 125mm complete all as specified and as directed by the Engineer-in-Charge.

S&F Aluminium handles, cast type, anodised of size 150mm long complete all as specified and as directed by the Engineer-in-Charge.

S&F stainless steel wire cloths 0.36mm nominal dia of wire and averaging width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge.

M&L for anodised aluminium framed work such as grills with frame, & framed guard bars similar work complete all as specified and as directed by the Engineer-in-Charge.

M&L Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufactures complete all as specified and as directed by the Engineer-in-Charge.

M&L for double action door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium sheet foundation box ,main body with stainless steel cover, grovering piovt made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed by the Engineer-in-Charge.

Prelaminated particle board,interior grade, prelaminated both side 18 /19 mm thick with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work but prelaminated both sides with decorative choice laminations complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix in repairs18 / 19 mm thick Veneered particle board, fix in cupboard shelves, interior grade, solid core, medium density general purposes type with commercial face veneers type ‘BB’ complete all as specified and as directed by the Engineer-in-Charge.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps (when open) 30 mm complete all as specified and as directed by the Engineer-in-Charge.

S&F Ball catches with 8mm dia steel ball, and bras body and striking plate including letting in and fixed complete all as specified and as directed by the Engineer-in-Charge.

M & L II nd class hard wood Plain fillets, square, rectangular or triangular in section, clean swan, se-cured with nails or brads, sectional area not exc 3.00 Sqcm complete all as specified and as directed by the Engineer-in-Charge.

S & F aluminium anodised Hasp and staple 75mm , safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by the Engineer-in-Charge.

S&F 100 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix Extruded aluminium alloy handles, 100 mm long fabricated type., anodised complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of Stone slabs and tiles of any description or thickness in floors, walls, aprons etc., removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge.

S&F for Non- skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with screed bed 15 mm thick CM 1:6 complete all as specified and as directed by the Engineer-in-Charge.

M&L Glazed ceramic coloured tiles in vertical surface 350x250x7 mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering CM1:4 complete all as specified and as directed by the Engineer-in-Charge.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing over 15mm thick screed in CM(1:6) complete all as specified and as directed by the Engineer-in-Charge.

M&L for 5cm sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete complete all as specified and as directed by the Engineer-in-Charge

S/F sinks made of stainless steel of 1 mm thick kitchen sink with plug washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size with drainage board overall size 915 mm x460 mm bowl size 410 mm x330 mm x160 mm complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs 15mm dia stop valves fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for union complete all as specified and as directed by the Engineer-in-Charge.

S&F in repairs 15mm bore bib taps, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down 15mm dia steel tubing and connections, complete all as specified and as directed by the Engineer-in-Charge.

S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down 20mm dia steel tubing and connections, complete all as specified and as directed by the Engineer-in-Charge.

S&F 20 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and as directed by the Engineer-in-Charge.

Dismentaling of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000Ltr capesity complete all as specified and as directed by the Engineer-in-Charge.

S&F of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000Ltr capesity hoisted and fixed in position all as specified including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. complete screwed for 20mm bore iron pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 15 mm bore pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 20 mm bore pipe complete all as specified and as directed by the Engineer-in-Charge.

Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and as directed by the Engineer-in-Charge.

S&F Welded steel wire fabric supplied and fixed complete to wood or steel members complete all as specified and as directed by the Engineer-in-Charge.

Taking down cement plaster on walls and roof ceilings etc., including racking out joints, hacking for key, scrubbing down with water etc. to receive new plaster complete all as specified and as directed by the Engineer-in-Charge.

M&L rendering 15mm thick in 1:6 cement plaster on stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and as directed by the Engineer-in-Charge.

M&L rendering 15mm thick in 1:4 cement plaster on of stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and as directed by the Engineer-in-Charge.

M&L preparation of new wall surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer,including 3mm thick wall care putty on wall complete all as specified and as directed by the Engineer-in-Charge.

Complete removal of existing treatment and applying chalk whiting (putty) on plastered surface, preparatory to distempering, priming plastered and other surfaces with alkali resistant priming paint and applying two coats of OBD on wall complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of white wash on surfaces of ceiling complete all as specified & directed by Engineer-in-charge.

Complete preparation new surfaces of walls and preparation of surfaces (external faces) of walls and applying two coats of external weather proof paint of Apex or equivalent over a coat of primer (self coat) complete all as per manufacturers instructions, complete all as specified and as directed by the Engineer-in-Charge.

M&L for 50 mm thick PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregates) as in plinth protection finished even and smooth complete all as specified and as directed by the Engineer-in-Charge.

Demolition of cement concrete unreinforced in groundfloors and pavings not exc 15cm thickness below or above ground level etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including screed bed or bedding layer of 15 mm thick in CM (1:6) complete all as specified and as directed by the Engineer-in-Charge.

M&L for machine cut kota stone slab 20-25mm thick as in skirting & dado and laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick backing coat in CM (1:6) complete all as specified and as directed by the Engineer-in-Charge.

Taking down carefully existing point wiring of any description light, fan,sockets,bells etc) complete including fittings such as terminal boxes, switches, sockets, ceiling rose, lamp holders, brackets sketch fittings, pendants, fan regulartors and making good the disturbed surfaces, walls, floors etc. complete all as specified and as directed by the Engineer-in-Charge.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as specified and as directed by the Engineer-in-Charge.

M&L point wiring complete with 1.5 Sqmm single core PVC insulated cable 1100 Volts grade multistranded copper conductor drawn through in PVC Casing and Capping on surface stone/brick, masonry walls, roofs floors etc including MS terminal boxes fabricaterd out of 1.12mm thick MS sheet sunk type / surface type and laminated top sheet of 2mm thick for housing switches sockets, regulators etc including provn of 1.5 sqmm dia copper conductor for earth wire connected to common dolly complete all as specified and as directed by the Engineer-in-Charge. (a) One light point / Fan point / Exhuast Fan point controlled by one 5 Amps One way switch complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No. 51 but for one 3 pin 5/6 Amps switch socket outlet on same board complete all as specified and as directed by the Engineer-in-Charge.

All as per Item No. 51 but for one 3 pin 5/6 Amps switch socket outlet on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per item No.51 above but wiring with 4.0 Sq mm and 2.5 sqmm for earth continuity for 3 pin 15/16 Amps switch socket combination complete all as specified and as directed by the Engineer-in-Charge.

M&L switch piano flush type single pole one way 5 Amps complete all as specified and as directed by the Engineer-in-Charge.

M&L switch piano flush type single pole one way 15 Amps complete all as specified and as directed by the Engineer-in-Charge.

M&L Switch Socket Combination outlet, multipurpose, 2 pin 5 amps/3 pin 5 amps controled by one switch 5 amps, flush type complete all as specified and as directed by the Engineer-in-Charge.

M&L Universal socket outlet with shutter, 5/15 amps controlled by one switch 15 amps, flush type complete all as specified and as directed by the Engineer-in-Charge.

S&F Ceiling fan regulator Stepped type, 120 W-2 module AC 240 V complete all as specified and as directed by the Engineer-in-Charge.

M&L lamp holder insulated body with back plate suitable for battern fittings complete all as specified and as directed by the Engineer-in-Charge.

supply and fix LED Lamp Retro fit type 9 watts 230 V and all as specified by Engr-in-charge complete all as specified and as directed by the Engineer-in-Charge.

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminais complete all as specified and as directed by the Engineer-in-Charge.

S&F Sheet Modular metal enclosure DB TPN 415 Volts 4 Way double door type with 200 Amps busbar for fixing of MCBs complete all as specified and as directed by the Engineer-in-Charge.

S&F Sheet Modular metal enclosure DB SPN 240 Volts 8 Way double door type with 200 Amps busbar for fixing of MCBs complete all as specified and as directed by the Engineer-in-Charge.

S&F MCB Triple pole and neutral, 63A, 415 Volts AC complete all as specified and as directed by the Engineer-in-Charge.

S&F MCB Single pole and neutral, 40A, 415 Volts AC complete all as specified and as directed by the Engineer-in-Charge.

S&F MCB Single pole, 5-32A, 415 Volts AC complete all as specified and as directed by the Engineer-in-Charge.

Supply and drawn sub main wiring with two runs of 4 Sq mm single core PVC insulated unsheathed cable upto and including 1100 volts grade with multistranded copper conductor drawn through in PVC Casing and Capping on surface walls, floors etc including one run of 2.5 Sqmm PVC insulated copper conductor for earth continuity wire complete all as specified and as directed by the Engineer-in-Charge. (Note : Two runs of copper conductor and one run of 2.5 Sqmm copper earth wire will be measured and paid as one unit only)

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.5 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by the Engineer-in-Charge.

S&F new generation energy saving and environmental friendly long life varsatile pressure die cast aluminium IP66 road way light fitting with high power LED as light source of capacity 20 watts with suitable drivers etc fixing to wall/poll with and including bracket made out of GI pipe of suitable dia light grade not less than 1.5 mtr long, bent to shape, fixed to Pole/Wall in any position with flat iron clamps of size 30 x 4mm including taking down old unserviceable street light fitting of any type and capacity complete all as specified and directed. Make : Havells cat No : VILUMINASL20WLED757SASYBOPC or techno commercial equivalent model in Philips /Bajaj /Luker /Wipro.

M/s Shri Inder Construction Company

Habib Traders