8938REPAIR TO WOODEN/STEEL FURNITURE,POLISHING PAINTING AND OTHER RELATED WORK AT VARIOUS UNITS UNDER GE NORTH MUMBAI

Amount

CHAIR DINING OFFRS FD/MAP-II/04 Removing the existing unserviceable seat foam and replacing with 75mm thick urethane foam with 40 density pasted with adhesive duly covered with acrylic fabric of approved class, not less than 350/- per Rm complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING OFFRS FD/MAP-II/04 Removing the existing unserviceable seat and replacing with 12mm thick BWR Phenol bonded plywood complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING OFFRS FD/MAP-II/04 Removing the existing unserviceable side and front rail and replacing with 70mm x 40mm teakwood complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING OFFRS FD/MAP-II/04 Removing the existing unserviceable rear rail and replacing with 90mm x 40mm teakwood complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING OFFRS FD/MAP-II/04 Removing the existing unserviceable front/ rear leg and replacing with 35mm x 50mm teakwood complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING OFFRS FD/MAP-II/04 Removing the existing unserviceable stiffener and replacing stiffener with 20mm x 25mm teakwood complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING OFFRS FD/MAP-II/04 Removing the existing unserviceable wooden block stopper and replacing block with 120mm x 75mm x 25mm teakwood stopper complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING OFFRS FD/MAP-II/04 Removing old broken PVC ring/rubber shoe and replacing with new one as shown in furniture drawing complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING OFFRS FD/MAP-II/04 Preparing/ cleaning of old decorated surface/ rubbing by emery paper, removing all spots, filling with putty and applying two coats of French polish match with existing polish complete all as specified in drawing and directed by Engineer-in-Charge.

SOFA SET WOODEN 5 SEATER ( 3+1+1) FD-258, FD-373 Removing the existing unserviceable foam replacing with new foam 40 density 100mm thick covered with long cloth complete all as specified in drawing and directed by Engineer-in-Charge. Note : tapestry cloth will be measured and paid on relevalent item

SOFA SET WOODEN 5 SEATER ( 3+1+1) FD-258,FD-373 Removing the existing unserviceable tapestry cloth of seat cushion replacing with new tapestry cloth of approved quality not less than Rs.340/- per metre complete all as specified in drawing and directed by Engineer-in-Charge.

SOFA SET WOODEN 5 SEATER ( 3+1+1) FD-258,FD-373 Removing the existing unserviceable arm rest and replacing with new teakwood of section 70 x 35mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

SOFA SET WOODEN 5 SEATER ( 3+1+1) FD-258,FD-373 Removing the existing unserviceable seat ply for single seater and replacing with 12mm thick BWR Phenol bonded plywood complete all as specified in drawing and directed by Engineer-in-Charge.

SOFA SET WOODEN 5 SEATER ( 3+1+1) FD-258,FD-373 S & F in repairs new PVC ring/rubber shoes to the legs duly screwed complete all as specified in drawing and directed by Engineer-in-Charge.

SOFA SET WOODEN 5 SEATER ( 3+1+1) FD-258,FD-373 Preparing/cleaning of old decorated surface/rubbing by emery paper removing all spots, filling with putty and polishing with two coats of French polish match to match existing polish complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR WRITING FD-280/FD-250 Removing the existing unserviceable front leg and replacing with new teakwood legs of section 30 x 55mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR WRITING FD-280/FD-250 Removing the existing unserviceable rear leg and replacing with new teakwood legs of section 30 x 55mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR WRITING FD-280/FD-250 Removing the existing unserviceable left/right/rear rail and replacing with new one teakwood section 30 x 65mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR WRITING FD-280/FD-250 Removing the existing unserviceable front rail and replacing with new one teakwood section 30 x 65mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR WRITING FD-280/FD-250 Removing the existing unserviceable side stiffener for bottom legs and replacing with new one teakwood section 25 x 20mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR WRITING FD-280/FD-250 Removing the existing unserviceable centre stiffener for bottom legs and replacing with new one teakwood section 25 x 20mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR WRITING FD-280/FD-250 Removing the existing unserviceable left/right armrest and replacing with new one teakwood section 60 x 25mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR WRITING FD-280/FD-250 Removing the existing unserviceable upper/lower stiffener and replacing with new one teakwood section 50 x 15mm out of 50 x 35mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR WRITING FD-280/FD-250 Removing the existing unserviceable Plastic cane from seat and replacing with best quality of white plastic cane 2mm wide and 0.4mm thick half round gola type, without any joint, in Godrej pattern complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR WRITING FD-280/FD-250 Removing the existing unserviceable PVC ring/ rubber shoe and replacing with new one complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR WRITING FD-280/FD-250 Preparing/cleaning of old decorated surface/rubbing by emery paper removing all spots, filling with putty, two coats of French polish match with existing polish complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING JCOs/Ors (FD/Map-II/05) Removing old unserviceable/broken PVC seat and provision of new PVC seat 4mm thick and 4 x 10mm thick ribs moulded along with seat in single piece with holes & screwed with frame complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING JCOs/Ors (FD/Map-II/05) Removing the existing unserviceable front leg and replacing with new teakwood legs of section 45 x 45mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING JCOs/Ors (FD/Map-II/05)CHAIR DINING FD-228 Removing the existing unserviceable rear leg and replacing with new teakwood legs of section 65 x 45mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING JCOs/Ors (FD/Map-II/05) Removing old broken centre stiffener of legs bottom and replacing with new French polished teakwood stiffener of legs bottom of size 20 x 25mm duly furnished and polished complete all as specified and directed by Engineer-in-Charge.

CHAIR DINING JCOs/Ors (FD/Map-II/05) Removing old broken side stiffener of legs bottom and replacing with new French polished teakwood stiffener of legs bottom of size 20 x 25mm duly furnished and polished complete all as specified and directed by Engineer-in-Charge.

CHAIR DINING JCOs/Ors (FD/Map-II/05) Removing old broken PVC ring/ rubber shoes and replacing with new one complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING JCOs/Ors (FD/Map-II/05 S&F providing new front/side rail of chair dining for supporting between side rail left and right size 20 x 25mm x2 Nos duly furnished and polished complete all as specified and directed by Engineer-in-Charge

CHAIR DINING JCOs/Ors (FD/Map-II/05) Preparing/ cleaning of old decorated surface/ rubbing by emery paper removing all spots, filling with putty, two coats of French polish match with existing polish complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR EASY FD-229 / FD-358 Removing the existing unserviceable Plastic cane from seat and replacing with best quality of white plastic cane 2mm wide and 0.4mm thick half round gola type, without any joint, in Godrej pattern complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR EASY FD-229 / FD-358 Removing the existing unserviceable Plastic cane from back and replacing with best quality of white plastic cane 2mm wide and 0.4mm thick half round gola type, without any joint, in Godrej pattern complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR EASY FD-229 / FD-358 Removing the existing unserviceable front legs and replacing with new teakwood section of section 55 x 25mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge

CHAIR EASY FD-229 / FD-358 Removing the existing unserviceable rear legs and replacing with new teakwood section of section 55 x 25mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge

CHAIR EASY FD-229 / FD-358 Removing the existing unserviceable arm rest and replacing with new teakwood section of section 65 x 25mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge

CHAIR EASY FD-229 / FD-358 Removing the existing unserviceable PVC ring/ hard rubber shoe and replacing with new one complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR EASY FD-229 / FD-358 Preparing/ cleaning of old decorated surface/ rubbing by emery paper removing all spots, filling with putty, two coats of French polish match with existing polish complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING FD-228 Removing the existing unserviceable Plastic cane from seat and replacing with best quality of white plastic cane 2mm wide and 0.4mm thick half round gola type, without any joint, in Godrej pattern complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING FD-228 Removing the existing unserviceable front leg and replacing with new teakwood legs of section 45 x 45mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING FD-228 Removing the existing unserviceable rear leg and replacing with new teakwood legs of section 65 x 45mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING FD-228 Removing the existing unserviceable upper/lower stiffener for back and replacing with new one teakwood section 45 x 15mm out of 45 x 35mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING FD-228 Removing the existing unserviceable centre stiffener for bottom legs and replacing with new one teakwood section 25 x 20mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING FD-228 Removing the existing unserviceable side stiffener for bottom legs and replacing with new one teakwood section 25 x 20mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING FD-228 Removing the existing unserviceable PVC ring/ rubber shoe and replacing with new one complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR DINING FD-228 Preparing/cleaning of old decorated surface/rubbing by emery paper removing all spots, filling with putty, two coats of French polish match with existing polish complete all as specified in drawing and directed by Engineer-in-Charge.

MIRROR DRESSING (GENTS) FD/E6/MAP-II/16 Removing the existing unserviceable mirror and replacing with new mirror, 5.5mm thick electro copper plated mirror of polished sheet complete all as specified in drawing and directed by Engineer-in-Charge.

MIRROR DRESSING (GENTS) FD/E6/MAP-II/16 Removing the existing unserviceable mirror back and replacing with new back out of 12mm thick BWR Phenol bonded plywood complete all as specified in drawing and directed by Engineer-in-Charge.

MIRROR DRESSING (GENTS) FD/E6/MAP-II/16 Removing the existing unserviceable shelves and replacing with 03 nos each, 5.5mm thick glass shelves supported on and including glass holder complete all as specified in drawing and directed by Engineer-in-Charge.

MIRROR DRESSING (GENTS) FD/E6/MAP-II/16 Removing the existing unserviceable sides and replacing with new side out of 18mm thick pre laminated particle board complete all as specified in drawing and directed by Engineer-in-Charge.

MIRROR DRESSING (GENTS) FD/E6/MAP-II/16 Removing the existing unserviceable hinges and replacing with 03 nos each,75mm thick MS hinge complete all as specified in drawing and directed by Engineer-in-Charge.

MIRROR DRESSING (GENTS) FD/E6/MAP-II/16 Removing the existing unserviceable magnetic catch and replacing with magnetic catch 02 Nos at top and bottom, inside the cabinet to catch mirror frame complete all as specified in drawing and directed by Engineer-in-Charge.

DRESSING TABLE (LADIES) FD/MAP-II/07 Removing the existing unserviceable Top and replacing with 18mm thick MDF board complete all as specified in drawing and directed by Engineer-in-Charge.

DRESSING TABLE (LADIES) FD/MAP-II/07 Removing the existing unserviceable drawer shutter and replacing with 18mm thick pre-laminated particle board, one side lamination, exterior grade, ISI Marked with 2 nos piano hinges, 75mm, stainless steel complete all as specified in drawing and directed by Engineer-in-Charge.

DRESSING TABLE (LADIES) FD/MAP-II/07 Removing the existing unserviceable drawer shutter top and replacing with 18mm thick pre-laminated particle board, one side lamination, exterior grade, ISI Marked complete all as specified in drawing and directed by Engineer-in-Charge.

DRESSING TABLE (LADIES) FD/MAP-II/07 Removing the existing unserviceable drawer shutter side and replacing with 18mm thick pre-laminated particle board, one side lamination, exterior grade, ISI Marked complete all as specified in drawing and directed by Engineer-in-Charge.

DRESSING TABLE (LADIES) FD/MAP-II/07 Removing the existing unserviceable drawer shutter back and replacing with 18mm thick pre-laminated particle board, one side lamination, exterior grade, ISI Marked complete all as specified in drawing and directed by Engineer-in-Charge.

DRESSING TABLE (LADIES) FD/MAP-II/07 Removing the existing unserviceable drawer bottom and replacing with 6mm thick BWR Phenol bonded plywood complete all as specified in drawing and directed by Engineer-in-Charge.

DRESSING TABLE (LADIES) FD/MAP-II/07 Removing the existing unserviceable mirror and replacing with new mirror, 5.5mm thick electro copper plated mirror of polished sheet with TW framing of size 25 x 20mm complete all as specified in drawing and directed by Engineer-in-Charge.

DRESSING TABLE (LADIES) FD/MAP-II/07 Removing the existing unserviceable mirror back and replacing with new back out of 6mm thick BWR Phenol bonded plywood complete all as specified in drawing and directed by Engineer-in-Charge.

DRESSING TABLE (LADIES) FD/MAP-II/07 Removing the existing unserviceable knob and replacing with brass CP knob 25mm dia complete all as specified in drawing and directed by Engineer-in-Charge.

DRESSING TABLE (LADIES) FD/MAP-II/07 Removing the existing unserviceable wheel and replacing with 50mm dia new twin wheel castors of injection moulded in black nylon complete all as specified and as directed by Engineer-in-Charge.

DRESSING TABLE (LADIES) FD/MAP-II/07 Removing the existing unserviceable seat foam and replacing with 75mm thick urethane foam with 40 density pasted with adhesive duly covered with tapestry cloth of approved class, not less than 350/- per Rm complete all as specified in drawing and directed by Engineer-in-Charge.

TV TROLLY FD/E6/MAP/04(R) Removing the existing unserviceable Top and replacing with 18mm thick MDF board complete all as specified in drawing and directed by Engineer-in-Charge.

TV TROLLY FD/E6/MAP/04(R) Removing the existing unserviceable sides and replacing with 18mm thick MDF board complete all as specified in drawing and directed by Engineer-in-Charge.

TV TROLLY FD/E6/MAP/04(R) Removing the existing unserviceable back and replacing with 18mm thick MDF board complete all as specified in drawing and directed by Engineer-in-Charge.

TV TROLLY FD/E6/MAP/04(R) Removing the existing unserviceable glass and replacing with 5.5mm thick sheet glass, ordinary quality, fitted with SS hinges and magnet catcher complete all as specified in drawing and directed by Engineer-in-Charge.

TV TROLLY FD/E6/MAP/04(R) Removing the existing unserviceable castor wheels and replacing with new 50mm PVC heavy duty twin castor wheel complete all as specified in drawing and directed by Engineer-in-Charge.

TV TROLLY FD/E6/MAP/04(R) Removing the existing unserviceable shutter and replacing with new shutter made up of 18mm thick MDF board complete all as specified in drawing and directed by Engineer-in-Charge.

TV TROLLY FD/E6/MAP/04(R) Removing the existing unserviceable handle and replacing with new 100mm brass heavy duty decorative handle complete all as specified in drawing and directed by Engineer-in-Charge.

PEG TABLE FD-25 Removing the existing unserviceable top and replacing with 19mm MDF board with 4mm thick teakwood edging complete all as specified in drawing and directed by Engineer-in-Charge.

PEG TABLE FD-25 Removing the existing unserviceable leg and replacing with new teakwood legs of section 30 x 50mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

PEG TABLE FD-25 Removing the existing unserviceable front rail and replacing with new teakwood rail of section 20 x 40mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

PEG TABLE FD-25 Removing the existing unserviceable short stiffener and replacing with new teakwood stiffener of section 20 x 40mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

PEG TABLE FD-25 Removing the existing unserviceable PVC ring/ hard rubber shoe and replacing with new one complete all as specified in drawing and directed by Engineer-in-Charge.

PEG TABLE FD-25 Preparing/ cleaning of old decorated surface/ rubbing by emery paper removing all spots, filling with putty, two coats of French polish match with existing polish complete all as specified in drawing and directed by Engineer-in-Charge.

HAT STAND WITH MIRROR FD-233/FD-23 Removing the existing unserviceable mirror and replacing with new mirror, 5.5mm thick electro copper plated mirror of polished sheet with 6mm x 35mm TW edging complete all as specified in drawing and directed by Engineer-in-Charge.

HAT STAND WITH MIRROR FD-233/FD-23 Removing the existing unserviceable peg and replacing with copper oxidised steel peg complete all as specified in drawing and directed by Engineer-in-Charge.

HAT STAND WITH MIRROR FD-233/FD-23 Removing the existing unserviceable key plate and replacing made out of 3mm thick MS plate of size 40 x 25mm complete all as specified in drawing and directed by Engineer-in-Charge.

HAT STAND WITH MIRROR FD-233/FD-23 Preparing/cleaning of old decorated surface/rubbing by emery paper removing all spots, filling with putty and polishing with two coats of French polish match to match existing polish complete all as specified in drawing and directed by Engineer-in-Charge.

BED CHARPOY WOODEN DRG NO : FD-21/FD-246 Removing the existing unserviceable top and replacing with 12mm thick commercial plywood ISI marked size exact as mentioned in drawing, complete all as specified in drawing and directed by Engineer-in-Charge.

BED CHARPOY WOODEN DRG NO : FD-21/FD-246 Removing the existing unserviceable short rail and replacing with new teakwood side rail size and length as indicated in drawing, complete all as specified in drawing and directed by Engineer-in-Charge.

BED CHARPOY WOODEN DRG NO : FD-246 Removing the existing unserviceable long rail and replacing with new teakwood long rail size and length as indicated in drawing complete all as specified in drawing.

BED WITH PLY WOOD DRG NO : FD-246 Removing the existing unserviceable head rest with legs and replacing with new head board including legs with 3.5/4.0mm thick teak ply face both sides, including 12 dia half cut teak wood bead complete all as specified in drawing and directed by Engineer-in-Charge.

BED CHARPOY WOODEN DRG NO : FD-246 Removing the existing unserviceable footboard with legs and replacing with foot board including legs with 3.5/4.0mm thick teak ply face both sides, including 12 dia half cut teak wood bead complete all as specified in drawing and directed by Engineer-in-Charge.

BED CHARPOY WOODEN DRG NO : FD-246 Removing the existing unserviceable Centre stiffener and replacing with new one to support bed top plywood complete all as specified in drawing and directed by Engineer-in-Charge.

BED CHARPOY WOODEN DRG NO : FD-246 Removing the existing unserviceable Corner block rail and replacing with new one of size 50 x 100 x 100 mm between rail and legs for tightening of bed complete all as specified in drawing and directed by Engineer-in-Charge.

BED CHARPOY WOODEN DRG NO : FD-246 Preparing/cleaning of old decorated surface/rubbing by emery paper removing all spots, filling with putty, two coats of French polish match with existing polish complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE CENTRE FD-235 Removing the existing unserviceable top and replacing with 19mm MDF board with 4mm thick teakwood edging complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE CENTRE FD-235 Removing the existing unserviceable top long rail and replacing with new teakwood rail of section 25 x 50mm thick duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE CENTRE FD-235 Removing the existing unserviceable top short rail and replacing with new teakwood rail of section 25 x 50mm thick duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE CENTRE FD-235 Removing the existing unserviceable top centre stiffener and replacing with new teakwood rail of section 25 x 50mm thick duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE CENTRE FD-235 Removing the existing unserviceable legs and replacing with new teakwood legs of section 45 x 45mm at top and 25 x25mm at bottom duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE CENTRE FD-235 Removing the existing unserviceable PVC ring/ rubber shoe and replacing with new one complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE CENTRE FD-235 Preparing/cleaning of old decorated surface/rubbing by emery paper removing all spots, filling with putty, two coats of French polish match with existing polish complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE 3' x 2' W/O DRAWER Removing the existing unserviceable top and replacing with 19mm MDF board with 4mm thick teakwood edging complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE 3' x 2' W/O DRAWER Removing the existing unserviceable top long rail and replacing with new teak wood rail of section 25 x 65mm thick duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE 3' x 2' W/O DRAWER Removing the existing unserviceable top short rail and replacing with new teakwood rail of section 25 x 65mm thick duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE 3' x 2' W/O DRAWER Removing the existing unserviceable legs and replacing with new teakwood legs of section 60 x 60mm at top and 30 x 30mm at bottom duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE 3' x 2' W/O DRAWER Removing the existing unserviceable centre stiffener and replacing with new teakwood rail of section 25 x 40mm thick duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE 3' x 2' W/O DRAWER Removing the existing unserviceable side stiffener and replacing with new teakwood rail of section 25 x 40mm thick duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE 3' x 2' W/O DRAWER Removing the existing unserviceable PVC ring/ rubber shoe and replacing with new one complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE 3' x 2' W/O DRAWER Preparing/cleaning of old decorated surface/rubbing by emery paper removing all spots, filling with putty, two coats of French polish match with existing polish complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE BEDSIDE MAP S & F of front/side panels made out of prelaminated board 18/19mm thick after tacking out of old/broken/cracked side panels carefully shape and size all as per drg and directed by Engineer-in-Charge.

TABLE BEDSIDE MAP Removing the existing unserviceable top and S & F new prelaminated particle board18/19mm as per drawing and directed by Engineer-in-Charge.

TABLE BEDSIDE MAP S & F CP brass handle of size 75 mm shall be provided complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE BEDSIDE MAP S & F Set of two telescopic channel shall be provided of drawer complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DINING 1200x900x760mm FD/MAP-II/03 Removing the existing unserviceable MDF board and replacing with new Pre laminated 18mm thick MDF board 1200 x 900mm with TW lapping all-round duly furnished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DINING 1200x900x760mm FD/MAP-II/03 Removing the existing unserviceable legs and replacing with new teakwood legs of section 45 x 95mm thick duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DINING 1200x900x760mm FD/MAP-II/03 Removing the existing unserviceable long rail and replacing with new teakwood long rail of section 45 x 100mm thick duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DINING 1200x900x760mm FD/MAP-II/03 Removing the existing unserviceable short rail and replacing with new teakwood short rail of section 45 x 100mm thick duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DINING 1200x900x760mm FD/MAP-II/03 Removing the existing unserviceable Corner block rail and replacing with new one of size 50 x 100 x 100 mm between rail and legs for tightening of bed complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DINING 1200x900x760mm FD/MAP-II/03 Removing the existing unserviceable PVC rubber shoe and replacing with new one complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DINING 1200x900x760mm FD/MAP-II/03 Preparing/cleaning of old decorated surface/rubbing by emery paper removing all spots, filling with putty,two coats of French polish match with existing polish complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DINING 8 PER FD-273 Preparing/cleaning of old decorated surface/rubbing by emery paper removing all spots, filling with putty,two coats of French polish match with existing polish complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE WRITING FD-275 Removing the existing unserviceable top and replacing with 19mm MDF board with 4mm thick teakwood edging complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE WRITING FD-275 Removing the existing unserviceable legs and replacing with new teakwood legs of section 60 x 60mm at top and 30 x 30mm at bottom duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE WRITING FD-275 Removing the existing unserviceable drawer and replace with new drawer drawer made out of 19mm commercial Ply BWR both side commercial finish provided with 3mmthick teak wood beading all around complete all as specified and directed by Enge-in- charge.

TABLE WRITING FD-275 Removing the existing unserviceable Shutter and replace with new drawer shutter made out of 19mm commercial Ply BWR both side commercial finish provided with 3mmthick teak wood beading all around complete all as specified and directed by Enge-in- charge.

TABLE WRITING FD-275 Removing the existing unserviceable rail and replace with new rail made IInd class hard teakwood all as specified and directed by Enge-in- charge.

TABLE WRITING FD-275 Removing the existing unserviceable PVC rubber shoe and replacing with new one complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE Writing FD-275 Preparing/cleaning of old decorated surface/rubbing by emery paper removing all spots, filling with putty, two coats of French polish match with existing polish complete all as specified in drawing and directed by Engineer-in-Charge.

Side Board FD-275 Preparing/cleaning of old decorated surface/rubbing by emery paper removing all spots, filling with putty, two coats of French polish match with existing polish complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DINING 6 PER FD-30/FD-239/FD-273 Preparing/cleaning of old decorated surface/rubbing by emery paper removing all spots, filling with putty, two coats of French polish match with existing polish complete all as specified in drawing and directed by Engineer-in-Charge.

ALMIRAH LARGE STEEL- FD-1031 Removing of unserviceable handle of any description and supplying and fixing chromium plated handle of size 150mm long to almirah large steel complete all as specified and as directed by Engineer-in-Charge. Make Godrej or equivalent to Godrej pattern

ALMIRAH LARGE STEEL- FD-1031 Removal of unserviceable locks of any description and supplying and fixing locks of grade- II quality and shall conform to IS: 729-1979, 6 lever brass (50mmx50mm) Godrej pattern to almirah large steel with duplicate stainless steel keys complete all as specified and as directed by Engineer-in-Charge. Make - Godrej or equivalent to Godrej pattern

ALMIRAH LARGE STEEL- FD-1031 Removing of unserviceable cleats and supplying and fixing new cleats using with 1.6mm thick MS sheet to shelves of almirah large steel complete all as specified and as directed by Engineer-in-Charge.

ALMIRAH LARGE STEEL- FD-67/FD-1031 M & L for removing old unserviceable hinges 75mm from almirah large steel and supply & fix new hinges 75mm same as per existing size and material by welding complete all as specified and as directed by Engineer-in-Charge.

ALMIRAH LARGE STEEL- FD-67/FD-1031 Removing old unserviceable legs and supplying and fixing new legs of size 100mm x 485mm x 75mm made out of 1mm thick CRCA steel and welding to almirah large steel complete all as specified and as directed by Engineer-in-Charge.

ALMIRAH LARGE STEEL- FD-67/FD-1031 Removing old unserviceable locking vertical rod and supplying and fixing new locking vertical rod of 10mm MS rod to almirah large steel complete all as specified and as directed by Engineer-in-Charge.

ALMIRAH LARGE STEEL- FD-1031 Removing of unserviceable shelves from Almirah large and supplying and fixing new shelves to almirah large steel with 1mm thick CRCA steel shelves complete all as specified and as directed by Engineer-in-Charge.

ALMIRAH LARGE STEEL-FD-1031 Removing old unserviceable shutter and supplying and fixing new shutter made out of 1mm thick CRCA steel and fixed to almirah large steel with and including hinges complete all as specified and as directed by Engineer-in-Charge.

ALMIRAH LARGE STEEL- FD-1031 M & L for preparing the surface of almirah large steel with shelves by scrapping with emery paper, filling holes with putty wherever required and painting both internally and externally with two coats of olive green synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

ALMIRAH MEDIUM/SMALL STEEL- FD-1032 Removing of unserviceable handle of any description and supplying and fixing chromium plated handle of size 150mm long to almirah medium/small steel complete all as specified and as directed by Engineer-in-Charge. Make Godrej or equivalent to Godrej pattern

ALMIRAH MEDIUM/SMALL STEEL-FD-1032 M & L for removing old unserviceable 3 way locking device from almirah medium/small steel and supply & fix lock 6 lever 50x50mm device operated by means of a chromium plated steel handle same as per existing size and material complete all as specified and as directed by Engineer-in-Charge. Make Godrej or equivalent to Godrej pattern

ALMIRAH MEDIUM/SMALL STEEL- FD-1032 Removing of unserviceable cleats and supplying and fixing new cleats using with 1.6mm thick MS sheet to shelves of almirah medium/small steel complete all as specified and as directed by Engineer-in-Charge.

ALMIRAH MEDIUM/SMALL STEEL- FD-1032 M & L for removing old unserviceable hinges 75mm from almirah medium/small steel and supply & fix new hinges 75mm same as per existing size and material by welding complete all as specified and as directed by Engineer-in-Charge.

ALMIRAH MEDIUM/SMALL STEEL- FD-1032 Removing old unserviceable legs and supplying and fixing new legs of size 100mmx 400mm x 75mm made out of 20 Gauge MS sheet and welding to almirah medium and small steel complete all as specified and as directed by Engineer-in-Charge.

ALMIRAH MEDIUM/SMALL STEEL- FD-1032 Removing old unserviceable locking vertical rod and supplying and fixing new locking vertical rod of 10mm MS rod to almirah medium and small steel complete all as specified and as directed by Engineer-in-Charge.

ALMIRAH MEDIUM/SMALL STEEL- FD-1032 Removing of unserviceable shelves from Almirah medium and supplying and fixing new shelves to almirah medium and small steel with 1mm thick CRCA steel shelves complete all as specified and as directed by Engineer-in-Charge.

ALMIRAH MEDIUM/SMALL STEEL- FD-67/FD-1032 M & L for preparing the surface of almirah medium/small with shelves by scrapping with emery paper, filling holes with putty wherever required and painting both internally and externally with two coats of synthetic enamel olive green paint of approved shade complete all as specified and as directed by Engineer-in-Charge.

BOOK SHELF STEEL WITH GLASS SHUTTER FD-1028 SIMILAR PATTERN Replacing unserviceable glass from book shelf glass shutter and S & F for providing new glass of 3mm thick as per existing pattern complete all as specified and as directed by Engineer-in-Charge.

BOOK SHELF STEEL WITH GLASS SHUTTER FD-1028 SIMILAR PATTERN Replacing unserviceable locks from book shelf glass shutter and S&F for providing new locks of grade- II quality and shall conform to IS: 729-1979, 6 lever brass (50mmx50mm) Godrej pattern with duplicate keys as per existing size and pattern complete all as specified and as directed by Engineer-in-Charge.

BOOK SHELF STEEL WITH GLASS SHUTTER FD-1028 SIMILAR PATTERN Replacing unserviceable shutter from book shelf glass shutter and S&F for providing new shutter made out of 1mm thick as per existing size and pattern including 3mm glass complete all as specified and as directed by Engineer-in-Charge.

BOOK SHELF STEEL WITH GLASS SHUTTER FD-1028 SIMILAR PATTERN Replacing unserviceable handle from book shelf glass shutter and S&F for providing new chromium plated steel handle of size 75mm complete all as specified and as directed by Engineer-in-Charge.

BOOK SHELF STEEL WITH GLASS SHUTTER FD-1028 SIMILAR PATTERN M & L for preparing the surface of book shelf glass shutter by scrapping with emery paper, filling holes with putty wherever required and painting with two coats of synthetic enamel paint of olive green shade as approved complete all as specified and as directed by Engineer-in-Charge.

CHAIR VERANDAH FD-19 SIMILAR PATTERN Removing the unserviceable plastic cane from seat of chair verandah, cleaning tubular surface of chair and M & L for recaning with 4mm new plastic cane closely knitting as per approved mat pattern complete all as specified and as directed by Engineer-in-Charge.

CHAIR VERANDAH FD-19 SIMILAR PATTERN Removing the unserviceable plastic cane from back of chair verandah, cleaning tubular surface of chair and M & L for recaning with 4mm new plastic cane closely knitting as per approved mat pattern complete all as specified and as directed by Engineer-in-Charge.

CHAIR VERANDAH FD-19 SIMILAR PATTERN Removing old unserviceable PVC ring/ rubber of chair verandah and supplying and fixing new PVC ring/ rubbers suitable for 20mm MS tube complete all as specified and as directed by Engineer-in-Charge.

CHAIR VERANDAH FD-19 SIMILAR PATTERN M & L for preparing the tubular surface of chair verandah by scrapping with emery paper and painting with Two coat of synthetic enamel paint of approved shade complete all as specified and as directed by Engineer-in-Charge.

CHAIR CBA STEEL FD-75(M) SIMILAR PATTRN Removing the unserviceable Seat and S & F new seat of teak wood adjusting size duly 4mm plastic caned closely knitting and polished with nut and bolt complete all as specified and directed by Engineer-in -charge.

CHAIR CBA STEEL FD-75(M) SIMILAR PATTRN Removing the unserviceable back and S & F new back of teak wood adjusting size duly 2mm and around lining 4mm plastic caned closely knitting and polished with nut and bolt complete all as specified and directed by Engineer-in -charge.

CHAIR CBA STEEL FD-75(M) SIMILAR PATTRN Removing the existing unserviceable left/right armrest and replacing with new one teakwood section 60 x 25mm duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

CHAIR CBA STEEL FD-75(M) SIMILAR PATTRN Removing old unserviceable PVC ring/ rubber and supplying and fixing new PVC ring/ rubbers complete all as specified and as directed by Engineer-in-Charge.

CHAIR CBA STEEL FD-75(M) SIMILAR PATTRN M & L for preparing the surface of chair CBA steel by scrapping with emery paper, filling holes with putty wherever required and painting with two coats of synthetic enamel paint olive green complete all as specified and as directed by Engineer-in-Charge.

CHAIR WRITING MAP-SIMILAR PATTERN Removing old unserviceable seat from all type of chair writing and S & F new seat of 12mm thick hot pressed plywood upholstered with polypropylene fabric and moulded polyurethene foam with PVC lipping all round complete all as specified and as directed by Engineer-in-Charge.

CHAIR WRITING MAP-SIMILAR PATTERN Removing old unserviceable seat back from chair writing and S & F new seat of 12mm thick hot pressed plywood upholstered with polypropylene fabric and moulded polyurethene foam with PVC lipping all round complete all as specified and as directed by Engineer-in-Charge.

CHAIR VERANDAH- FD/ MAP-II/15(R) Removing of old damaged / unserviceable back from chair verandah steel and supplying and fixing new back 4mm thick made out of PVC moulded , weight not less than 1.85kg, along with 90 x 10mm ribs, 10 nos provided with PVC edges 20mm folded towards back complete all as specified and as directed by Engr-in-Charge. Make- AMKO

CHAIR WRITING-MAP SIMILAR PATTERN Removing old unserviceable polyurethene PVC arms rest of chair revolving and S & F new polyurethene PVC arms rest made out of black integral skin polyurethane reinforced with MS insert scratch and weather resistant 50-70 shore "A‟ Hardness, fitted to the seat with powder coated armrest brackets made of 5mm thick HR steel all as specified and as directed by Engineer-in-charge.

CHAIR COMPUTER/REVOLVING- TP SIMILAR PATTERN Removing old unserviceable gas lift from all type of chair revolving and S & F new gas lift of chrome free cylinder tube fixed in MS black powder coated outer central column tube 38mm dia and 2mm thick with 100mm stroke length and able to sustain gas pressure of 300 force complete all as specified and as directed by Engineer-in-Charge.

CHAIR COMPUTER/REVOLVING- TP SIMILAR PATTERN Removing old unserviceable seat from all type of chair revolving and S & F new seat of 12mm thick hot pressed plywood upholstered with polypropylene fabric and moulded polyurethene foam with PVC lipping all round complete all as specified and as directed by Engineer-in-Charge.

CHAIR COMPUTER/REVOLVING- TP SIMILAR PATTERN Removing old unserviceable back from all type of chair revolving and S & F new back of 12mm thick hot pressed plywood upholstered with polypropylene fabric and moulded polyurethene foam designed with contour lumber support for extra confortwith PVC lipping all round complete all as specified and as directed by Engineer-in-Charge.

CHAIR COMPUTER/REVOLVING- TP SIMILAR PATTERN Removing old unserviceable castor wheels of chair revolving and S & F new twin wheel castors of injection moulded in black nylon complete all as specified and as directed by Engineer-in-Charge.

CHAIR COMPUTER/REVOLVING- TP SIMILAR PATTERN Removing old unserviceable polyurethene PVC arms rest of chair revolving and S & F new polyurethene PVC arms rest made out of black integral skin polyurethane reinforced with MS insert scratch and weather resistant 50-70 shore "A‟ Hardness, fitted to the seat with powder coated armrest brackets made of 5mm thick HR steel all as specified and as directed by Engineer-in-charge.

CHAIR COMPUTER/REVOLVING- TP SIMILAR PATTERN Removing old unserviceable 5 star base of chair revolving and S & F new pedestal assembly injection moulded in black 30% glass filled nylon 10.5mm dia forged bright zinc coated MS castor pin, press fitted each prong for holding castor & 600mm pitch centre dia all as specified and as directed by Engineer-in-charge. Note- Castor wheel shall be measured and paid separately.

CHAIR VERANDAH- FD/ MAP-II/15(R) Removing of old damaged / unserviceable seat from chair verandah steel and supplying and fixing new seat 4mm thick made out of PVC moulded , weight not less than 1.85kg, along with 90 x 10mm ribs, 10 nos provided with PVC edges 20mm folded towards back complete all as specified and as directed by Engineer-in-Charge. Make- AMKO

CHAIR VERANDAH- FD/ MAP-II/15(R) Removing old unserviceable PVC ring/ rubber of chair verandah steel and supplying and fixing new PVC inner ring/ rubbers suitable for 19mm MS tube complete all as specified and as directed by Engineer-in-Charge.

CHAIR VERANDAH- FD/ MAP-II/15(R) M & L for preparing the surface of chair verandah by scrapping with emery paper, filling holes with putty wherever required and painting with two coats of synthetic enamel paint of approved shade complete all as specified and as directed by Engineer-in-Charge.

TABLE 3' x 2' STEEL FD-1008 Removing of old damaged / unserviceable table top from table 3' x 2' with drawer steel and supplying and fixing new table top of 17mm thick pre laminated particle MDF board, exterior grade with teakwood edging all around including polishing to teakwood beading complete all as specified and as directed by Engineer-in-Charge complete all as specified and as directed by Engineer-in-Charge.

TABLE 3' x 2' STEEL FD-1008 Taking out worn out Legs of table 3' x 2' with drawer without damaging the other components and supplying and fixing the new Legs made out of 25mm square mild steel tubing of 16 gauge and fixing the same by welding to the table in place of removed Legs all as per drawing, complete all as specified and as directed by Engineer-in-Charge.

TABLE 3' x 2' STEEL FD-1008 Taking out worn out long rail of table 3' x 2' with drawer without damaging the other components and supplying and fixing the new Top long rail made out of 25mm square mild steel tubing of 16 gauge and fixing the same by welding to the table in place of removed Legs all as per drawing, complete all as specified and as directed by Engineer-in-Charge.

TABLE 3' x 2' STEEL FD-1008 Taking out worn out short rail of table 3' x 2' with drawer without damaging the other components and supplying and fixing the new Top short rail made out of 25mm square mild steel tubing of 16 gauge and fixing the same by welding to the table in place of removed Legs all as per drawing, complete all as specified and as directed by Engineer-in-Charge.

TABLE 3' x 2' STEEL FD-1008 Taking out worn out stiffener of table 3' x 2' with drawer without damaging the other components and supplying and fixing the new stiffener long made out of 25mm square mild steel tubing of 16 gauge and fixing the same by welding to the table in place of removed Legs all as per drawing, complete all as specified and as directed by Engineer-in-Charge.

TABLE 3' x 2' STEEL FD-1008 Taking out worn out short stiffener of table 3' x 2' with drawer without damaging the other components and supplying and fixing the new stiffener short made out of 25mm square mild steel tubing of 16 gauge and fixing the same by welding to the table in place of removed Legs all as per drawing, complete all as specified and as directed by Engineer-in-Charge.

TABLE 3' x 2' STEEL FD-1008 Removing of unserviceable drawer with box of table 3' x 2' and supplying and fixing new drawer with box of existing size, made out of 1mm CRCA steel sheet with side channels ,back springs complete all as specified and as directed by Engineer-in-Charge.

TABLE 3' x 2' STEEL FD-1008 Removal of unserviceable locks of any description and supplying and fixing locks of grade- II quality and shall conform to IS: 729-1979, 6 lever brass (50mmx50mm) Godrej pattern to table 3' x 2' with drawer with duplicate stainless steel keys complete all as specified and as directed by Engineer-in-Charge. Make - Godrej or equivalent to Godrej pattern

TABLE 3' x 2' STEEL FD-1008 Removing old unserviceable PVC ring/ rubber of table 3' x 2' with drawer and supplying and fixing new PVC ring/ rubbers suitable for 25mm MS tube complete all as specified and as directed by Engineer-in-Charge.

TABLE 3' x 2' STEEL FD-1008 M & L for preparing the surface by scrapping with emery paper, filling holes with putty wherever required and painting with two coats of synthetic enamel paint olive green complete all as specified and as directed by Engineer-in-Charge.

TABLE 900 x 900 x760mm STEEL FD-1009 Removing of old damaged / unserviceable table top from table 900 x 900 x 760mm steel and supplying and fixing new table top of 18mm thick MDF board with 3m thick TW edging including polishing to teakwood beading complete all as specified and as directed by Engineer-in-Charge.

TABLE 900 x 900 x760mm STEEL FD-1009 Removing old unserviceable PVC ring/ rubber of table 900 x 900 x 760mm and supplying and fixing new PVC ring/ rubbers suitable for 25mm MS tube complete all as specified and as directed by Engineer-in-Charge.

TABLE 900 x 900 x760mm STEEL FD-1009 M & L for preparing the surface of table 900 x 900 x 760mm by scrapping with emery paper, filling holes with putty wherever required and painting both internally and externally with two coats of synthetic enamel paint of of olive green shade complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE OFFICERS STEEL FD-84, FD-1003 Removing of existing broken table top of table office officer steel and supplying and fixing new table top of size 1.68m x 0.87m of 18mm thick MDF board with 3m thick TW edging including polishing to teakwood beading complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE OFFICERS STEEL FD-84, FD-1003 Taking out worn out Legs of table office officer without damaging the other components and supplying and fixing the new Legs made out of 25mm square mild steel tubing of 16 gauge and fixing the same by welding to the table in place of removed Legs complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE OFFICERS STEEL FD-84, FD-1003 Taking out worn out stiffener of table office officer without damaging the other components and supplying and fixing the new stiffener made out of 25mm square mild steel tubing of 16 gauge and fixing the same by welding to the table in place of removed stiffener complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE OFFICERS STEEL FD-84, FD-1003 Removing of unserviceable drawer including drawer box(set of three drawer) of table office officer steel and S & F new drawer with box (Set of Three)boxes of existing size, made out of 1mm thick MS sheet with side channels ,back springs complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE OFFICERS STEEL FD-84, FD-1003 Removing of unserviceable shelf of table office officer steel and supplying and fixing new shelf made out of 1mm thick sheet of existing size complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE OFFICERS STEEL FD-84, FD-1003 Removing of unserviceable shutter of table office officer steel and supplying and fixing new shutter made out of 1mm thick sheet of existing size including standard PVC recessed handle complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE OFFICERS STEEL FD-84, FD-1003 Removing of unserviceable back of shutter/drawer of table office officer steel and supplying and fixing new back made out of 1mm thick sheet of existing size complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE OFFICERS STEEL FD-84, FD-1003 Removing of unserviceable lock of any description and supplying and fixing new locks of grade- II quality and shall conform to IS: 729-1979, with brass 4 lever with duplicate keys as Godrej pattern to table office officer complete all as specified and as directed by Engineer-in-Charge. Make : Godrej or equivalent to godrej make

TABLE OFFICE OFFICERS STEEL FD-84, FD-1003 Removing old unserviceable PVC ring/ rubber of table office officer and supplying and fixing new PVC ring/ rubbers outer suitable for 25mm MS tube complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE OFFICERS STEEL FD-84, FD-1003 M & L for preparing the surface by scrapping with emery paper, filling holes with putty wherever required and painting both internally and externally with two coats of synthetic enamel paint of of olive green shade complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE CLERK STEEL FD-84, FD-1004 Removing of existing broken table top of table office clerk steel and supplying and fixing new table top of size 1.2m x 0.61m made out of 18mm thick MDF board with 3m thick TW edging including polishing to teakwood beading complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE CLERK STEEL FD-84, FD-1004 Taking out worn out Legs of table office clerk steel without damaging the other components and supplying and fixing the new Legs made out of 25mm square mild steel tubing of 16 gauge and fixing the same by welding to the table in place of removed Legs complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE CLERK STEEL FD-84, FD-1004 Taking out worn out short stiffener on bottom legs of table office clerk steel without damaging the other components and supplying and fixing the new stiffener made out of 25mm square mild steel tubing of 16 gauge and fixing the same by welding to the table in place of removed stiffener complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE CLERK STEEL FD-84, FD-1004 Taking out worn out long stiffener on bottom legs of table office clerk steel without damaging the other components and supplying and fixing the new stiffener made out of 25mm square mild steel tubing of 16 gauge and fixing the same by welding to the table in place of removed stiffener complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE CLERK STEEL FD-84, FD-1004 Removing of unserviceable drawers(SET OF 3) including drawer box of table office clerk steel and supplying and fixing new( Set of three) drawer with box of existing size, made out of 1mm thick MS sheet with side channels ,back springs complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE CLERK STEEL FD-84, FD-1004 Removing of unserviceable lock of any description and supplying and fixing new locks of grade- II quality and shall conform to IS: 729-1979, with brass 4 lever with duplicate keys as Godrej pattern to table office clerk complete all as specified and as directed by Engineer-in-Charge. Make : Godrej or equivalent to godrej make

TABLE OFFICE CLERK STEEL FD-84, FD-1004 Removing old unserviceable PVC ring/ rubber of table office clerk and supplying and fixing new PVC ring/ rubbers outer suitable for 25mm MS tube complete all as specified and as directed by Engineer-in-Charge.

TABLE OFFICE CLERK STEEL FD-84, FD-1004 M & L for preparing the surface by scrapping with emery paper, filling holes with putty wherever required and painting both internally and externally with two coats of synthetic enamel paint of olive green shade complete all as specified and as directed by Engineer-in-Charge.

TABLE COMPUTER- FD/ E6/MAP-II/03 Removing of old damaged / unserviceable table top from table computer steel and supplying and fixing new table top of 18mm thick pre-laminated particle board, laminated on both sides with 4mm thick teakwood edging all around including polishing to teakwood beading complete all as specified and as directed by Engineer-in-Charge complete all as specified and as directed by Engineer-in-Charge.

TABLE COMPUTER- FD/ E6/MAP-II/03 Removing of old damaged / unserviceable shelf from table computer steel and supplying and fixing new shelf of 18mm thick pre-laminated particle board, laminated on both sides complete all as specified and as directed by Engineer-in-Charge.

TABLE COMPUTER- FD/ E6/MAP-II/03 Removing of old damaged / unserviceable key board tray from table computer and supplying and fixing new key board tray of size 450mm x 480mm of 18mm thick pre-laminated particle board, laminated on both sides complete all as specified and as directed by Engineer-in-Charge.

TABLE COMPUTER- FD/ E6/MAP-II/03 Removing of old damaged / unserviceable drawer from table computer and supplying and fixing new drawer, 75mm deep of 18mm thick pre-laminated particle board, laminated on both sides complete all as specified and as directed by Engineer-in-Charge.

TABLE COMPUTER- FD/ E6/MAP-II/03 Removing of old damaged / unserviceable pull out tray from table computer and supplying and fixing new pull out tray of 18mm thick pre-laminated particle board, laminated on both sides complete all as specified and as directed by Engineer-in-Charge.

TABLE COMPUTER- FD/ E6/MAP-II/03 Removing of old damaged / unserviceable knobs from table computer and supplying and fixing new knob made out of high density material complete all as specified and as directed by Engineer-in-Charge.

TABLE COMPUTER- FD/ E6/MAP-II/03 Removing of old damaged / unserviceable side board from table computer and supplying and fixing new side board of 18mm thick pre-laminated particle board, laminated on both sides complete all as specified and as directed by Engineer-in-Charge.

TABLE COMPUTER- FD/ E6/MAP-II/03 Removing of old damaged / unserviceable nylon buffers from table computer and supplying and fixing new nylon buffers made out of high density material complete all as specified and as directed by Engineer-in-Charge.

TABLE COMPUTER- FD/ E6/MAP-II/03 M & L for preparing the surface of table computer by scrapping with emery paper, filling holes with putty wherever required and painting both internally and externally with two coats of synthetic enamel paint of approved shade complete all as specified and as directed by Engineer-in-Charge.

DOUBLE BED MATTRESS/CHARPOY 6'-6" X 5' Removing the existing unserviceable head rest and replacing with new 19mm thick plywood head rest interior grade with teakwood beading duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

DOUBLE BED MATTRESS/CHARPOY 6'-6" X 5' Removing the existing unserviceable foot rest and replacing with new 19mm thick plywood foot rest interior grade with teakwood beading duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

DOUBLE BED MATTRESS/CHARPOY 6'-6" X 5' Removing the existing unserviceable top ply and replacing with new 19mm thick plywood BWR grade complete all as specified in drawing and directed by Engineer-in-Charge.

DOUBLE BED MATTRESS/CHARPOY 6'-6" X 5' Removing the existing unserviceable centre stiffener and replacing with new TW 40 x 25mm stiffener complete all as specified in drawing and directed by Engineer-in-Charge.

DOUBLE BED MATTRESS/CHARPOY 6'-6" X 5' Preparing/cleaning of old decorated surface/rubbing by emery paper removing all spots, filling with putty, two coats of polish glossy finish with MRF corp Vapocure paint (Durothane PU) with colour of high class finish complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DRESSING LADIES ( 2100mm X 0140mm X 380mm) Removing the existing unserviceable box unit and replacing with new of 19mm thick ply BWR Phenol bonded interior grade with teakwood beading duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DRESSING LADIES ( 2100mm X 0140mm X 380mm) Removing the existing unserviceable drawer and replacing with new of 19mm thick ply BWR Phenol bonded interior grade with teakwood beading duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DRESSING LADIES ( 2100mm X 0140mm X 380mm) Removing the existing unserviceable shutter and replacing with new of 19mm thick BWR Phenol bonded ply interior grade with teakwood beading duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DRESSING LADIES ( 2100mm X 0140mm X 380mm) Removing the existing unserviceable knob and replacing with 25mm dia new brass chromium plated knob fixed on shutter duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DRESSING LADIES ( 2100mm X 0140mm X 380mm) Removing the existing unserviceable mirror and replacing with new mirror, 5.5mm thick electro copper plated mirror of polished sheet of size 355 x 1220mm complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DRESSING LADIES ( 2100mm X 0140mm X 380mm) Removing the existing unserviceable mirror back and replacing with 6mm thick BWR Phenol bonded plywood with TW framing 25 x 19mm complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DRESSING LADIES ( 2100mm X 0140mm X 380mm) Preparing/cleaning of old decorated surface/rubbing by emery paper removing all spots, filling with putty, two coats of polish glossy finish with MRF corp Vapocure paint (Durothane PU) with colour of high class finish complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE BEDSIDE 590mm x 375mm x 445mm Removing the existing unserviceable board tray and replacing with new 19mm thick BWR Phenol bonded plywood board tray interior grade with teakwood beading duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE BEDSIDE 590mm x 375mm x 445mm Removing the existing unserviceable back and replacing with new 19mm thick BWR Phenol bonded plywood back interior grade with teakwood beading duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE BEDSIDE 590mm x 375mm x 445mm Preparing/cleaning of old decorated surface/rubbing by emery paper removing all spots, filling with putty, two coats of polish glossy finish with MRF corp Vapocure paint (Durothane PU) with colour of high class finish complete all as specified in drawing and directed by Engineer-in-Charge.

LUGGAGE CUM RACK 1380x620X610MM - TP Removing the existing unserviceable side and replacing with new 19mm thick BWR Phenol bonded plywood back interior grade with teakwood beading duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

LUGGAGE CUM RACK 1380x620X610MM - TP Removing the existing unserviceable back and replacing with new 19mm thick BWR Phenol bonded plywood back interior grade with teakwood beading duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

LUGGAGE CUM RACK 1380x620X610MM - TP Removing the existing unserviceable front and replacing with new IInd class teakwood duly furnished and polished complete all as specified in drawing and directed by Engineer-in-Charge.

LUGGAGE CUM RACK 1380x620X610MM - TP Preparing/cleaning of old decorated surface/rubbing by emery paper removing all spots, filling with putty, two coats of polish glossy finish with MRF corp Vapocure paint (Durothane PU) with colour of high class finish complete all as specified in drawing and directed by Engineer-in-Charge.

TABLE DINING ORs -FD-165(M) SIMILAR PATTERN Taking out worn out Legs without damaging the other components of table dining ORs and supplying and fixing the new Legs made out of 25mm square MS tubing of 16 gauge and fixing the same by welding to the table in place of removed Legs including two coats of synthetic enamel paint over a coat of red oxide primer over existing steel frame complete all as specified and as directed by Engineer-in-Charge.

All as per item No. 231 described here-in-before but Top rails long

All as per item No. 231 described here-in-before but Top rails short

All as per item No. 231 described here-in-before but Stiffeners long

All as per item No. 231 described here-in-before but Stiffeners short

Removing of existing broken table top of table dining OR s and supplying and fixing new table top made out of 18mm thick pre-laminated particle board, laminated on one side with 4mm thick teakwood edging all around including polishing to teakwood beading and fixing with suitable size of screws to table frame including one coat of black synthetic enamel paint over a coat of red oxide primer over existing steel frame complete all as specified and as directed by Engineer-in-Charge.

TABLE DINING ORS FD-165 Removing old unserviceable PVC ring/ rubber of table dining ORs and supplying and fixing new PVC ring/ rubbers outer suitable for 25mm MS tube complete all as specified and as directed by Engineer-in-Charge.

TTABLE DINING ORs -FD-165(M) SIMILAR PATTERN M & L for preparing the surface by scrapping with emery paper, filling holes with putty wherever required and painting both internally and externally with two coats of synthetic enamel paint of olive green shade complete all as specified and as directed by Engineer-in-Charge.

Preparation/ cleaning of existing decorated surface of rack 6 tier steel, rubbing by emery paper, removing all spots, filling with putty, spray painting with two coat of synthetic enamel black complete all as specified and as directed by Engineer-in-Charge.(FD/E6/MAP/08( R))

All as per item No. 239 described here-in-before but for Locker bed side steel FD-1032

All as per item No. 239 described here-in-before but for Book shelf open large steel FD69(M)

All as per item No. 239 described here-in-before but for Side rack with tray steel FD-97

M/s SK Construction

Chaudhary Enterprises