Loading
Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.7 L
Closing Date
17 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TRD BSL
17 conditions · 5 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB(available in GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (In case, the tenderer fails to submit Annexure VIB and/or Audited Balance Sheets, the offer will be summarily rejected).
Tenderer shall have "Electrical Contractor License", which must be valid at least up to Tender closing date. Copy of valid license must be attached along with the offer. In case the validity of the License submitted has expired, the tenderer's offer will be considered only if they have applied for renewal before the expiry of the License and have submitted valid proof of the same along with their offer. Otherwise, the offer shall not be considered.
In case a tenderer is participating as Sole Proprietor in a tender, it is mandatory for him to submit an undertaking on suitable stamp paper to this effect clearly mentioning PAN number also along with tender document at the time of submission of tender. (CEGE/CRly's letter no.CR.PCEE.Secy.Genl.Corresp, dated 13-10-2022.). Sole proprietor Certificate Format is uploaded herewith. (This certificate is mandatory for Proprietor firm and not equired from other than Proprietor firm. Other than Proprietor firm may upload a pdf with remark "Not applicable") ( Click here to download Format)
Bidder should submit the documents as prescribed in para 14 of second sheet of GCC-2022 to establish constitution of firm as well as legality of the person submitting the tender.
3 conditions · 1 needing a document upload
In case of other than Company/Proprietary firm, Annexure -V(A) shall be submitted by each member of Partnership Firm / Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/digitally signed by which they / he is qualifying the Qualifying Criteria mentioned in the Tender Document. Format of Annexure VA is available in GCC April'2022 uploaded with the tender.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
a. List of personal organization available on hand and proposed to be engaged for the subject work. b. List of Plant & Machinery available on hand (own) and proposed to be inducted (own & hired to be given separately) for the subject work. c. List of works completed in the last three financial year giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of schedule completion of work. Date of actual start, actual completion and final value of contract should also be given. d. List of works on hands indicating description of work, contract value, approximate value of balance work yet to be done and date of award.
Design, supply, erection testing and commissioning of 25 KV, Single Phase, AC OHE works, in connection with Yard re-modelling work at Walgaon and Chandur Bazaar stations in Bhusawal division of Central Railway.
BSL-ELECT-TRD-18-2026
BSL-ELECT-TRD-18-2026
Open
Works - General
9 Months
Jalgaon, Maharashtra
₹0
₹2.7 L
17 Apr 2026
24 Mar 2026
3 Apr 2026
320 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 77,05,897.6 | ||
| — | 200.00 | — | — | ||
| Digging, casting, grouting & muffing of foundation including cost of cement and material in other than hard soil & rock. (Foundation should be M-15 type as per IS-456, i.e ratio 1:2:4) | — | — | — | 15,14,800 | |
| — | 80.00 | — | — | ||
| Digging, casting, grouting & muffing of foundation including cost of cement and material in hard soil & rock. (Foundation should be M-15 type as per IS-456, i.e ratio 1:2:4) | — | — | — | 6,21,760 | |
| — | 6.00 | — | — | ||
| Preparation of design & drawing for overhead equipment | — | — | — | 1,08,348 | |
| — | 50.00 | — | — | ||
| Preparation, supply & fixing of sectioning diagram on foam sheet board with vinyl printing & framing | — | — | — | 15,650 | |
| — | 20.00 | — | — | ||
| Supply of galvanized steel for structure | — | — | — | 24,00,000 | |
| — | 18.00 | — | — | ||
| Erection of galvanized steel for structure | — | — | — | 1,26,000 | |
| — | 18.00 | — | — | ||
| Extra charges for power block work for Erection of galvanised steel for structures | — | — | — | 72,000 | |
| — | 2.00 | — | — | ||
| Erection of Portal / TTC Boom (Manual/with Road Crane) | — | — | — | 20,000 | |
| — | 2.00 | — | — | ||
| Extra charges for power block work for Erection of Portal / TTC Boom (Manual/with Road Crane) | — | — | — | 10,000 | |
| — | 3.00 | — | — | ||
| Supply of galvanized small parts steel (SPS) | — | — | — | 3,60,000 | |
| — | 3.00 | — | — | ||
| Erection of galvanized small parts steel (SPS) | — | — | — | 21,000 | |
| — | 3.00 | — | — | ||
| Extra charges for power block work for Erection of galvanised small parts steel (SPS) | — | — | — | 15,000 | |
| — | 36.00 | — | — | ||
| Supply of a single bracket / cantilever assembly suitable for Coventional OHE with bracket and stay porcelain insulators. | — | — | — | 7,56,000 | |
| — | 36.00 | — | — | ||
| Erection of a single bracket / cantilever assembly suitable for Coventional OHE with bracket and stay porcelain insulators | — | — | — | 36,540 | |
| — | 36.00 | — | — | ||
| Extra charges for power block work for Erection of a single bracket / cantilever assembly suitable for Coventional OHE with bracket and stay porcelain insulators. | — | — | — | 36,540 | |
| — | 80.00 | — | — | ||
| Supply of hard drawn round copper for dropper wire, diameter 5 mm as per IS:282:1982. | — | — | — | 80,000 | |
| — | 360.00 | — | — | ||
| Supply Contact wire Dropper clip (107) with locking wire as per RDSO Drawing no. RE/33/P/ 1181 Rev. G or latest. | — | — | — | 36,000 | |
| — | 360.00 | — | — | ||
| Supply 65 Sq.mm copper catenary dropper clip assembly consisting of catenary clip SS bolt M-10X30X35 mm (10/16), spring washer B-10, Split pin 2.5X20mm, as per RDSO Drawing no. ETI/OHE/P/1192 Mod. C or latest. | — | — | — | 36,000 | |
| — | 360.00 | — | — | ||
| Fabrication & erection of dropper assembly (Conventional OHE) including removal of old droppering. | — | — | — | 36,000 | |
| — | 360.00 | — | — | ||
| Extra charges for power block work for Fabrication & erection of dropper assembly (Conventional OHE) including removal of old droppering. | — | — | — | 36,000 | |
| — | 1.60 | — | — | ||
| Manual erection of overhead equipment (Conventional OHE). | — | — | — | 67,953.6 | |
| — | 1.60 | — | — | ||
| Extra charges for power block work for Manual erection of overhead equipment (Conventional OHE). | — | — | — | 40,000 | |
| — | 1.00 | — | — | ||
| Supply of Contact wire splice (Toothed type) complete with stainless steel stud bolt M-12, 25/20 as per RDSO drg no. ETI/OHE/P/1080-1 Mod-C | — | — | — | 1,192 | |
| — | 1.00 | — | — | ||
| Supply of Catenary Splice (65) as per RDSO drg. No. ETI/OHE/O/1090 or latest. | — | — | — | 616 | |
| — | 2.00 | — | — | ||
| Splicing & extension of anchored over head equipment. | — | — | — | 4,530 | |
| — | 2.00 | — | — | ||
| Extra charges for power block work for Splicing & extention of anchored over head equipment. | — | — | — | 4,530 | |
| — | 4.00 | — | — | ||
| Supply of termination assembly for Conventional OHE (Including insulators) | — | — | — | 38,000 | |
| — | 4.00 | — | — | ||
| Erection of termination assembly for Conventional OHE (Including insulators) | — | — | — | 6,000 | |
| — | 4.00 | — | — | ||
| Extra charges for power block work for Erection of OHE termination assembly Conventional OHE (Including insulators) | — | — | — | 4,000 | |
| — | 3.00 | — | — | ||
| Supply of 3 pulley type ATD assembly for Conventional OHE as per 2X25 KV AT System. (Without Counter Weight ) | — | — | — | 1,20,000 | |
| — | 3.00 | — | — | ||
| Erection of 3 pulley type ATD assembly for Conventional OHE as per 2X25 KV AT System. | — | — | — | 10,809 | |
| — | 3.00 | — | — | ||
| Extra charges for power block work for Erection of 3 pulley type ATD for Conventation OHE as per 2X25 KV AT System. | — | — | — | 6,000 | |
| — | 1.00 | — | — | ||
| Erection of anticreep arrangement | — | — | — | 4,000 | |
| — | 1.00 | — | — | ||
| Extra charges for power block work for Erection of anticreep arrangement | — | — | — | 2,000 | |
| — | 10.00 | — | — | ||
| Supply of guy rod assembly | — | — | — | 86,360 | |
| — | 10.00 | — | — | ||
| Erection of guy rod assembly | — | — | — | 6,000 | |
| — | 2.00 | — | — | ||
| Supply of Section Insulator assembly along with all fittings including porcelain sectioning insulator & porcelain 9 tonne insulator suitable for Conventional OHE | — | — | — | 84,972 | |
| — | 2.00 | — | — | ||
| Erection of Section Insulator assembly along with all fittings suitable for Conventional OHE | — | — | — | 6,772 | |
| — | 2.00 | — | — | ||
| Extra charges for power block work Erection of Section Insulator assembly along with all fittings suitable for Conventional OHE | — | — | — | 4,000 | |
| — | 2.00 | — | — | ||
| Supply of 25 KV 1600 A Single Pole Isolator assembly with Insulators and pad lock (03 keys) | — | — | — | 1,50,000 | |
| — | 2.00 | — | — | ||
| Erection of 25 KV 1600 A Single Pole Isolator assembly with Insulators | — | — | — | 10,000 | |
| — | 2.00 | — | — | ||
| Extra charges for power block work Erection of 25 KV 1600 A Single Pole Isolator assembly with Insulators | — | — | — | 4,000 | |
| — | 2.00 | — | — | ||
| Supply of Integral lock for Isolator with 02 nos key. | — | — | — | 3,312 | |
| — | 4.00 | — | — | ||
| Supply of 25 KV Post Insulator | — | — | — | 24,000 | |
| — | 4.00 | — | — | ||
| Erection of 25 KV Post Insulator | — | — | — | 3,200 | |
| — | 10.00 | — | — | ||
| Supply of single earth electrode | — | — | — | 39,110 | |
| — | 10.00 | — | — | ||
| Erection of single earth electrode | — | — | — | 9,560 | |
| — | 10.00 | — | — | ||
| Supply of Porcelain 9 Tonne Insulator RI 6020-I (Minimum CD 1050 mm) conforming to RDSO Specification no.T1/SPC/OHE/INS/0070 (04/2007) with A & C Slip no.1 & 2 or latest for Cut-in Insulator/Suspension. | — | — | — | 32,000 | |
| — | 10.00 | — | — | ||
| Supply of Contact Wire Ending Clamp (107) as per ID no.1110-2 & DRG.No ETI/OHE/1110-2. Each set comprising of 01 No. contact wiree nding clamp body part no.1118. 01 No. contact wire ending clamp wedge part no.1119 for Cut- in Insulator/Suspension. | — | — | — | 3,760 | |
| — | 10.00 | — | — | ||
| Supply of Catenary Wire Ending Clamp (65 Sq.mm) Part No.1121, 1092 &1094 with fasteners as per Drg NO.ETI/OHE/P/1120 Rev-B or Latest for Cut- in Insulator/Suspension | — | — | — | 5,640 | |
| — | 10.00 | — | — | ||
| Erection of cut-in Insulator assembly. | — | — | — | 7,120 | |
| — | 10.00 | — | — | ||
| Extra charges for power block work for erection of cut-in Insulator assembly. | — | — | — | 7,120 | |
| — | 80.00 | — | — | ||
| Supply of Copper Jumper wire (160 sq mm) | — | — | — | 80,240 | |
| — | 60.00 | — | — | ||
| Supply of P.G.Clamp (1030-3) complete assembly | — | — | — | 17,820 | |
| — | 10.00 | — | — | ||
| Erection of any type jumper assembly such as G Jumper, AT Jumper, Isolator Jumper etc | — | — | — | 5,000 | |
| — | 10.00 | — | — | ||
| Extra charges for power block work for Erection of any type jumper assembly such as G Jumper, AT Jumper, Isolator Jumper etc | — | — | — | 1,000 | |
| — | 450.00 | — | — | ||
| Supply of 40mm X 6mm Galvanized Traction Bond | — | — | — | 1,12,500 | |
| — | 450.00 | — | — | ||
| Fabrication & fixing of 40mm X 6mm Galvanized Traction Bond | — | — | — | 36,000 | |
| — | 50.00 | — | — | ||
| Supply of Retro reflective type Location number plates. | — | — | — | 21,550 | |
| — | 50.00 | — | — | ||
| Erection of Retro reflective type Location number plates including clamps & nut bolt. | — | — | — | 4,300 | |
| — | 10.00 | — | — | ||
| Supply of 25 KV Caution Board in electrified area as per RDSO Drawing. | — | — | — | 3,950 | |
| — | 10.00 | — | — | ||
| Erection of 25 KV Caution Board in electrified area as per RDSO Drawing including clamps & nut bolts. | — | — | — | 860 | |
| — | 50.00 | — | — | ||
| Painting of "OHE Parameters" on OHE structures as per Drwaing no. BSL/TD/SK-441 | — | — | — | 2,600 | |
| — | 50.00 | — | — | ||
| Painting of "Location Numbers" on backside of OHE structures as per Drawing no. BSL/TD/SK-424 | — | — | — | 2,150 | |
| — | 3.00 | — | — | ||
| Painting of Counter Weight of ATD by Silver Paint & Painting of Location number on bottom 3 pieces of counter weight with similer colour of enamelled number plate. | — | — | — | 954 | |
| — | 10.00 | — | — | ||
| Transfer of equipment from one mast or support to another including old bracket removal. | — | — | — | 25,000 | |
| — | 10.00 | — | — | ||
| Extra charges for power block work for Transfer of equipment from one mast or support to another including old bracket removal. | — | — | — | 10,000 | |
| — | 3.00 | — | — | ||
| Dismantling of OHE termination assembly | — | — | — | 2,250 | |
| — | 1.00 | — | — | ||
| Extra charges for power block work for Dismantling of OHE termination assembly | — | — | — | 693 | |
| — | 1.00 | — | — | ||
| Dismantling of any type of ATD assembly | — | — | — | 2,500 | |
| — | 1.00 | — | — | ||
| Extra charges for power block work for Dismantling of any type of ATD assembly | — | — | — | 1,000 | |
| — | 2.00 | — | — | ||
| Dismantling of guy rod assembly | — | — | — | 1,000 | |
| — | 4.00 | — | — | ||
| Dismantling OHE structures by cutting & transporting to Railway depot including loading and unloading. | — | — | — | 16,000 | |
| — | 1.00 | — | — | ||
| Dismantling of Single Pole Isolator assembly including SPS | — | — | — | 2,000 | |
| — | 1.00 | — | — | ||
| Extra charges for power block work for Dismantling of Single Pole Isolator assembly including SPS | — | — | — | 1,000 | |
| — | 5.00 | — | — | ||
| Breaking of foundation | — | — | — | 20,000 | |
| — | 50.00 | — | — | ||
| Supply of P.G.Clamp (1050-3) complete assembly | — | — | — | 22,350 | |
| — | 150.00 | — | — | ||
| Erection of copper feeder wire (150 sq.mm.) | — | — | — | 23,400 | |
| — | 150.00 | — | — | ||
| Extra charges for power block work for Erection of copper feeder wire (150 sq.mm.) | — | — | — | 24,150 | |
| — | 8.00 | — | — | ||
| — | 8.00 | — | — | ||
| — | 8.00 | — | — | ||
| — | — | — | 19,864 | ||
| — | 4.00 | — | — | ||
| — | — | — | 32,452 | ||
| — | 4.00 | — | — | ||
| Erectionof 9 Tonne insulator & suspension assembly for feeder wire. | — | — | — | 2,144 | |
| — | 4.00 | — | — | ||
| Extra charges for power block work for Erection of 9 Tonne insulator & suspension assembly for feeder wire. | — | — | — | 2,104 | |
| — | — | — | 58,75,670.5 | ||
| — | 150.00 | — | — | ||
| Digging, casting, grouting & muffing of foundation including cost of cement and material in other than hard soil & rock. (Foundation should be M-15 type as per IS-456, i.e ratio 1:2:4) | — | — | — | 11,36,100 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Soleproprietorcertificatepdf.pdf
ATTACHMENT
GCC-2022-ACS10_merged_compressed.pdf
ATTACHMENT
ACS11toGCC2022.pdf
ATTACHMENT
TenderBooklet18-2026.pdf
ATTACHMENT
Explanatory18-2026.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].