PERIODICAL SERVICES, REPAIRS TO ROOF PROJECTIONS, PLASTER, SHED AND CONNECTED ITEMS AT 03 AFRU CHANDAN UNDER GE (AF) JAISALMER

Amount

Demolition of cement concrete (reinforced) in roofs,ceiling floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:2:4 type B-0 using 12.5mm graded stone aggregate in column, Beams, cantilevers, bressummers, lintels and related members etc complete all as specifiedand dir. Note:-(i) Reinforcement & formwork shall be measured and paid for separately. (ii) Procurment of sand from Barmer (Sindri) and aggregate from Barmer (Black Granite)

M&L for reinforced cement concrete (nominal mix) 1:2:4 type B-0 using 12.5mm graded stone aggregate in chajjas and the like and complete all as specified. Note:- Reinforcement & formwork shall be measured and paid for separately.

M&L for providing Micro concrete with MICROCRETE at the rate of 25kg per 0.0125 m3 with 20% properly graded 5mm to 10mm silt free aggregate as per manufacturer instructions and mixing concrete with mechanically electrically operated mixer machine etc all as specified and directed. Make: CICO MICROCRETE of CICO Technologies ltd or equivalent in Fosroc/STP/BASF

Rough finished flat form work to Chajjas, beam, column, lintel, chullah hoods, water troughs and similar items including edges and formwork including necessary struts, scaffolding etc.

M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips .

M&L for Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

M&L for 8mm dia and over rebar using HY-200 chemical from HILITI or equivalent including drilling hole of required size in RCC beam/column/lintel/chajjas complete all as specified and as directed by Engr-in-charge.

M & L for removing of rust from existing steel surfaces with rust removrs of SIKA Rustoff 10 applied two coats @ 0.15Ltr/Sqm per coat and cleanng all rust with steel wire brush and washed with wter/chemical complete all as spd and dir by Engr-in-Charge. (Make- SIKA/BASF/FOSROC.)

M & L for application of Anti corressive coating with SIKA Rustoff friazinc on the exposed reinforcement proper mix applied @ 0.25 Ltr Sqm of exposed steel surface as per manufacture's instruction complete all as spd an dir by Engr-in -charge.(Make- SIKA/BASF/FOSROC.)

S&F galvanised welded steel wire fabric as extra reionforcement to RCC members like ceilings, chajja’s, beams, columns parapet walls, waste slab etc including all cutting and waste (wt not exc 4.00 kg/Sqm) complete all as specified and directed.

M&L for applying one coat of epoxy resin (FAIR BOND EP) on old concrete surfaces @ 0.30Kg/Sqm including preparation of surfaces as per manufacturer's instructions and applying 25mm thick (average thickness) of cement ,sand & Aggregate (1:1.5:3) in ratio aggregate n'less than 6mm size mixed with chloride free concrete plasticiser as per manufacturer's instruction with guniting applying manual and finished the surface even and smooth complete all as specified and directed.(Manual applied) Make : Fairmate chemicals or equivalent make of SIKA/BASF/FOSROC.

M&L for applying one coat of epoxy resin (FAIR BOND EP) on old concrete surfaces @ 0.30Kg/Sqm including preparation of surfaces as per manufacturer's instructions and applying 15mm thick (average thickness) rendroc plaster on concrete surfaces of Beam, column, ceiling, chajja Etc as per manufacturer's instruction with guniting applying manual and finished the surface even and smooth complete all as specified and directed.(Manual applied) Make : Fairmate chemicals or equivalent make of SIKA/BASF/FOSROC.

M&L for applying one coat of epoxy resin (FAIR BOND EP) on old concrete surfaces @ 0.30Kg/Sqm including preparation of surfaces as per manufacturer's instructions and applying 25mm thick (average thickness) rendroc plaster on concrete surfaces of Beam, column, ceiling, chajja Etc as per manufacturer's instruction with guniting applying manual and finished the surface even and smooth complete all as specified and directed.(Manual applied) Make : Fairmate chemicals or equivalent make of SIKA/BASF/FOSROC.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm,(400x400) in floors etc over and including 15 mm thick screed bedding in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed. Make: Orient bell, Johnson, Somany,Nitco.

S&F Glazed ceramic coloured tiles in vertical surface 300mm X 450mm x 7 thick set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 10mm thick backing coat in cm 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors (below or above ground level ) not exceeding 15 cm thickness complete all as spd and dir

Demolition of cement concrete (unreinforced) above ground floors not exceeding 15 cm thickness complete all as spd and dir

M & L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) as in 25 mm thick levelling coarse in flooring finished even and rough.

M & L 40 mm thick PCC type B-1,1:2:4 (using 20mm graded aggregate) as in flooring finished even and smooth with using extra cement all as specified.

Taking down & refixing in the same opening after resecuring or easing & adjusting of shutters of any description exc 1 Sqm but nexc 2 Sqm each.

Demolition of stone/brick masonry built in cement mortar including coping etc all as specified and directed by Engr - in - charge.

M&L for precast cement concrete solid blocks ( 1:3:6 ) type C-I (using 20mm graded stone aggregate) exc 10cm in width as in block masonry built in CM 1:4 etc complete all as specified.

M & L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths)as in other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, complete

M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

M&L for cutting holes into or through brick/stone walls built in cement mortar (nexc 400mm thick), superficial area exc 400 Sqcm nexc 0.10 Sqm and making good in cement mortar 1:3 or PCC 1:2:4: type B-1 as required.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbedground

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n'exc 50m and making good distrubed surface for any type of soil complete all as spd and dir.

M & L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation for concrete post/struts complete all as spd anddir.

M &L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Brick /stone wall.

S & F 2.8 mm thick factory made Polycarbonate chajjas with decorative frame complete ready to fix at site of dome shape as specified and directed having 600mm or an other width including fixing to stone/block masonary wall/RCC beam or column with anchor fasteners (min 04 Nos fastener or more ) as per fixing requirment and manufacturer instruction at site complete all as spd and dir.

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed self tapping screws as specified

S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed self tapping screws as specified

M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified.

Taking down cement plaster of any description, on brick or stone walls or ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc complete.

M & L 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick or concrete surfaces or stone masonry surfaces of wall, finished even and smooth w/o using extra cement complete.

M&L 15 mm thick rendering in cement mortar (1:6) on fair faces of brick or concrete surfaces or stone masonry surfaces of wall, finished even and smooth w/o using extra cement complete.

M&L 10 mm thick rendering in cement mortar (1:3) on ceiling faces of concrete surfaces or stone masonry surfaces of wall, finished even and smooth w/o using extra cementcomplete.

Raking out old, decayed cement mortar pointing to boulders, pitching, stone paving in horizontal/sloped surface and washing the joints, removing rubbish off the premises etc all as directed.

M&L for flush pointing in CM 1:4 to boulders, pitching, stone paving in horizontal/sloped surface all as directed.

M & L for prepariation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resitant primer on surfaces of walls any colour as approved by GE.

M & L for prepariation of new plastered surfaces and applying two coats of distemper oil emulsion including chalk whitening preparatory to distempering on surfaces of walls.

M & L for prepariation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying one coats of cement base paint (tinted) on surfaces of walls any colour as approved by Egr-in-charge.

Description all as per Ser item No above but two coats

M&L for preperation of old decorated or unplastered surfaces by brooming down and steel wire brushing , scrapping down smoke soot, moulds , moss and efflorescent salts and greasy spot etc, and applying two coat of white wash on walls including all cornices etc.

Description all as per item above item here - in - before but on ceiling

M & L for prepariation of old surfaces by washing, rubbing down and stopping of painted surfaces and applying one coat of tinted oil bound distemper on walls complete all as spd.

M&L for preperation of old decorated or unplastered surfaces by brooming down and steel wire brushing , scrapping , down smoke soot, and greasy spot etc, and applying one coats of exterior emulsion paint on surfaces of walls/Floor surface (VVIP area) any colour as approved by Egr-in-charge

Description all as per Ser item No above above but two coats

M&L for preperation of old decorated or unplastered surfaces by brooming down and steel wire brushing , scrapping , down smoke soot, and greasy spot etc, and applying one coats of exterior emulsion paint on surfaces of walls any colour as approved by Egr-in-charge

M&L for preparation of old painted wooden surface or wood based materials of any description, not otherwise described, over 10 cms widths or girth and applying one coat of synthetic enamel paint complete all as specified any colour as approved by Egr-in-charge

Description all as per Ser item No above above but on steel surfaces.

M&L for complete removal of existing treatment, filling up undulation and applying two layers readymixed wall putty on entire surface of wall etc cutting and finishing with appropriate sand paper and applying two coat of oil bound distemper (White or tinted) over one coat of primer after smoothening of surfaces complete of wall

M&L for one coat of water based synthetic emulsion paint to road side kerb stone incl preparation of old painted surface complete all as spd.

shiv construction & Engineers (BID ID -3477909)

M/s Ramesh & Company (BID ID -3472629)

KHUSBU CONSTRUCTION COMPANY (BID ID -3472631)

M/S MAYA CONSTRUCTION COMPANY (BID ID -3472715)

MARUDHARA CONSTRUCTION COMPANY (BID ID -3472443)

M.D. CONSTRUCTION CO. (BID ID -3477797)

RJS INFRATECH (BID ID -3477776)

M/S VISHNOI ENTERPRISES (BID ID -3471535)