Construction of Multipurpose Hall in Govt. College at Narnaund in Distt. Hisar (Pdg. E.I Internal only). RECALL

Amount

Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. (HSR 31.12 (c). ii) 100 amp.to 220 amp.415 V,10 KA 3-phase.

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. (HSR 31.13) ii) Size 40 mm x 40 mm x 6 mm.

M.S.Sheet (HSR 31.14) i) Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

Distribution board with plug and socket. Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. (HSR 31.15) ii) S.P.N. enclosure for single pole MCB 20 amp.

Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (HSR 31.17) Miniature circuit breakers of 9 KA breaking capacity. ii)SP MCB 6 amp. to 32 amp.

ix) TP MCB 40 amp. to 63 amp.

x) TPN MCB 40 amp. to 63 amp.

Supply and erection of Fittings and Accessories. (HSR 31.18) xi) Bakelite angle / straight button holder large size.

vii) Call bell 220 / 230 volts A.C. bakelite with double coil.

ix) Bell push flush type ( without flexible wire ) in existing sheet.

xii) Switch 5 amp. On existing sheet.

xiii) Wall socket 5 amp. On existing sheet.

xxvi) Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job.

xxiv) Erection only of 1x40 watts or 2x40 watts 1220 mm long / 1x20 watts or 2x20 watts ,610 mm long fluorescent tube fitting directly on wall including necessary connections with 0.75 sqmm ( 24 / 0.20 mm ) PVC copper flexible cable for connecting the tube with the adjecent point.

Pipe Laying. Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (HSR 31.21) xxi) Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

xxii) Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

xxx) Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. c) PVC pipe 65 mm dia.

(Q) Earthing (HSR 31.22). iii) Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

iv) Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

v) Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

x) Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required .

xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required.

xix) Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. staples of same size.

Under Ground Cables. Supply and erection of underground cable 1 meter below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches. xxix) 95 Sq. mm 3.5 Core Ard. Cable.

Supply and erection of underground cable ,loose in existing pipe or trenches complete with necessary connections. (HSR 31.26) xxviii) 70 Sq. mm 3.5 Core Ard. Cable.

xxix) 95 Sq. mm 3.5 Core Ard. Cable.

xli) 25 Sq. mm 4 Core Ard. Cable .

Supply and erection of suitable compression type brass cable glands for underground Cable. (HSR 31.28). iii) 25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

iv) 70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core .

Miscellaneous (HSR 31.35). iii) Supply and erection of caution notice plate in three languages.

vii) Supply and erection of 75 mm x75 mm x 60 mm deep M.S.box for telephone and inter-communication system including 2 pin 5 amp. socket including cost of Bakelite sheet

PVC Insulated wiring in recessed conduit. Wiring in 1.5 sqmm PVC insulated copper conduct cable in 1.6 mm thick conduit pipe. (HSR 31.36). i) Fan Point b) Medium Point

c) Long Point

ii) Light Point a) Short Point

b) Medium Point

c) Long Point

iii) Twin Control Light point with 2 way, 5 amp. Single pole switch c) Long Point

vi) Call bell point including MS box of size 180mmx 60 mm deep for call bell. c) Long Point

vii) 3 pin 5 amp. Plug point including earthing the 3rd pin etc. a) Short Point

c) Long point

viii) 3 pin 15 amp. Plug point with 4 amp. PVC insulated copper conductor cable including earthing the 3rd pin etc. c) Long point

S/E of of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe. (HSR 31.40) i) Cable size 1.5 sqm(3/0.81 mm)

ii) Cable size 2.5 sqm(3/1.05 mm)

iii) Cable size 4 sqm(7/0.85 mm)

S/E of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.41) viii) 16-way,TP&N (Horizontal)(8+48)

S/E of PVC conduit pipe ISI marked (Medium) recessed in wall/ ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of the work. (HSR 31.44) b) 25mm dia

Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection ect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.55).

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect. (HSR 31.56). i) 10 amp. 1 way switch

ii) 10 amp. 2 way switch

iii) 20 amp. Switch

iv) 10 amp. Socket

v) 16 amp. Socket

vi) Bell Push

vii) Fan Regulator

viii) Call bell Ding-Dong (Monica)

ix) Blanking plate.

Providing and fixing GI concealed sheet metal boxes with inner and outer faceplate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect. (HSR 31.570 i) 1 & 2 Modules

ii) 3 Modules

iii) 4 Modules

iv) 6 Modules

v) 8 Modules

vi) 12 Modules

Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. (HSR 31.69) vi) 4 Pole MCCB 200 amp

Non Schedule Items Supply and erection of Double door sheet, steel superline/ Powerline/ Loadline TPN Vertical distribution boards suitable for TP/ FP veritcal MCCBs 25 KA MCCB upto 125 amp as incomer (but without cost of MCCBs) fitted with busbars, Neutral links,& Blanking plates complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make:- Havell's/ C&S. 4 way DB Vertical

S/E of M.S. box for computer made of 16 guage of size 250mm x 200mm x 100 mm deep covered with 5 mm thick bakelite sheet white colour of ISI mark fixed by means of 4 nos .brass screws with cost of 1 No. 15 amp multi socket of ISI mark and 15 amp switch and 3 nos .5 amp multi socket with 5 amp switches of ISI mark including fixing the M.S. box in wall with cost of cement sand mixture including painting of M.S. Box and to complete the job in all respect upto the entire satisfatoin of Engineer-in- Charge of the work.