Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.0 LAccepted-AOC | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹16.2 L+₹1.0 L (6.91%)Rejected-Finance | L2 | Rejected-Finance Due to higher rates. | |
| 3 | L3₹17.2 L+₹2.0 L (13.3%)Rejected-Finance PO LEKHAPANI DIST TINSUKIA PIN 786 180 ASSAM | 786180 | L3 | Rejected-Finance Due to higher rates. |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
23 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
REPAIRS TO DRAIN, BOUNDARY/SECURITY WALL, GATE, FENCING, PATH, CULVERT ETC IN ZONE 1, II AND III, AT LEKHAPANI MIL STN
2022_MES_554403_2
8698/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (i)
4 documents required · 4 mandatory
₹500
GE LEKHAPANI
₹30,000
Yes
17 Dec 2022
31 Oct 2022
28 Nov 2022
31 Oct 2022
23 Nov 2022
9 Nov 2022
Amount
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water and removal of debris off the premises etc. complete all as specified and directed.
M&L Rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surfaces and finishing with fair and even complete all as specified and directed..
M&L Prepration of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete and removal of debris off the premises etc. complete all as specified and directed.
Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundation, etc or n. exc.10 sqm on plan for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed.
Surface excavation nexc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Removing excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in CM (1:4) complete all as specified and directed.
All as per Item No. 8 above,but except bricks complete all as specified and directd by Engr-in-Charge. (Note : Servicable Old bricks obtained from demolition shall be reused after cleaning and washing )
M&L Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
M & L Bricks sub class B laid on edge bedded and jointed and pointed in CM (1:6) complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removal of debris off the premises etc. complete all as specified and direected.
Demolition of lime/cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and removal of debris off the premises etc. complete all as specified and directed.
M&L PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M & L PCC (1;3:6) type C1 (using 20mm graded stone aggregate) as in foundation concrete drain and surface channels etc complete all as specified and as directed.
Extra for forming fair finished drain or channel inner girth 30 cms in cement concrete using extra cement incl forms moulds mitred/stopped ends etc complete all as specified and directed.
M&L PCC (1:2:4) type B-1 using (using 20 mm graded stone aggregate) as in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed surfaces embedded in concrete.complete all as specified and directed.
Excavating in post holes (or similar holes) in soft /loose soil, each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm ,watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.
S&F Rolled mild steel section such as angle etc as in post and struts as in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, Flat iron fillets (for securing wiremesh etc ) including all necessary drilling , bolting or riveting etcand similar works conforming to Fe 410-0 or Fe 310-0, ccomplete all as specified and dircted.
S&F Mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 cm but not exceeding 10 cm long and dia of neck 11 to 15 mm complete all as specified and directed.
Dismantling Barbed wire fencing / wire mesh, any type complete all as specified and directed.
Supply only chain link mild steel galvanized fencing, any type or size complete all as specified and directed.
Fixing chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.
Restraining, resecuring including making good staples etc Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (Each line wire to be measured).
S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (Each line wire to be measured).
M&L Preparation of new or previously un treated steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L Preparation of old painted or plastered surfaces of walls etc by washing, rubbing down and applying one coat of cement base paint complete all as specified and directed.
M&L Preparation of old painted surfaces of steel of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L Preparation of old plastered / unplastered surfaces of walls / floor/ceilings, etc and applying two coast of acrylic antifungal exterior emulsion paint complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry or laid dry and pointed complete all as specified and directed.
Fixing only factory made chamfered edge cement concrete paver block laid in required coloured and pattern over and including supply,laying of 50 mm thick compacted bed of coarse sand, compacting and proper embedding/ layingof inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.laid over sand bed complete all as specified and directed by Eng-in-charge.
M&L 75mm thick PCC (1:3:6), type C-2, (using 40mm graded stone aggregates) as in path/paving complete all as specified and directed.
M & L Chequered cement conc tiles of size 25cm x 25cm x 22mm thick, cast in rubber moulded glossy finish of approved colour general purpose double layer with mixture of white and grey cement in equal proportions and pigments set and jointed and pointed in neat cement slurry in floor incl layer over 15 mm thick bedding of CM (1:6) complete all as specified and as directed
M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ layingof inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed
S&F TMT bar 10 mm dia and above cut to length bent to shape required including cranking hooking ends and binding with and including mild steel (annealed) wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed
M&L Providing precast PCC (1:2:4) Type B-1 (using 20mm graded stone aggregate) as in precast manhole cover slab set in CM (1:6) complete all as specified and as directed.
Dismantling wrought cast iron or mild steel work of any description not otherwise provided for complete all as specified and as directed
S&F Framed work of rolled mild steel conforming to Fe-290 (GdeE165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing complete all as specified and as directed.
S&F Mild steel best quality lathe machine made floor bushes and pintal hinges for steel gate welded to existing gate complete all as directed by Eng-in-charge. Note:- Any additional Mild steel member welded shall be masured and paid separately
Taking down steel gates from its position and repair the same including thorughtining alignment properly including welding additional stiffer, brases, pintol hinges locking arrangement etc and erecting the same back in position after applying one coat of synthetic enamel paint in area of gate n.exc 5.00 sqm each leaf complete all as directed by Eng-in-charge. Note : Necessary MS sections such as angle, pipe, bars, flats , lathe /bush Pintol hinges shall be finished with necessary greasing and the same shall be be measured and paid seperately by weight.
S&F Expanded metal cut to length bent to shape weight exc 4 kg per square metre required and tying with including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples or necessary welding with frame complete all as directed by Engr-in-Charge.
RC CONSTRUCTION
RIA CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .