Pot hole repars to damaged road at different places of ward no. 22

Dismantling & removing cement concrete including the useful materials for reuse & removing the debris with in 50 mt lead.

Earth work for excavation in all kinds of soil for excavation including rough dressing and leveling the bed and depositing the soil with in 50mt.initial lead and 1.5mt.initial lift and as direction of the Engineer-in-charge.

C.C (1:4:8) with 4cm size HG CRUSHER BROKEN metal including all cost, conveyance,royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C

R.C.C work of M-20 grade with 20mm & down grade BHG C/B chips including hoisting, laying & all cost, conveyance, royalty & taxes etc. comp. to work site as per the specification approved by the deptt. & direction of EIC.( Data for 15 cum)

Supplying fitting & placing uncoated HYSD reinforcement including cutting, bendind,binding & placing the steel rods as per drawing & technical specification with cost of binding wire 18 to 20 gauge

Rigid & smooth centering & shuttering for R.C.C. and C.C. works including false works, dismantling and removing them from the site after casting, curing including cost of materials etc., complete.

Scarifying the existing road surface and disposal of scarified materials,with with all leads and lifts etc.complete

Providing and applying primer/Tack coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60Kg/M2 using mechanical means as per clause 502 of MoSRT&H specification for road & bridge work.

Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen transporting the hot mix to work site laying with a hydro static paver finisher with mechanical control to the required grade, level and alignment rolling with smooth wheeled vibratory and tendem rollers to achieve the desired compaction as per clause 508 of MoSRT&H specification for road & bridge work.

Labour for scrapping, cleaning the road surface applying tack coat using 3.00 Kg of bitumen for 10M2 and laying 75 mm. thick built up spray grouting in two layers 37.50 mm. thick each layer using 0.45 Cum of 25 mm. to 40 mm. size hard grauite metal and 12.00 kg penetration grade of bitumen for 10.00M2 in each layer with 0.12 Cum of 12 mm. chips as key stone for 10M2 spreading over and laying including heating pouring and spreading over and spreading bitumen metal and chips and rolling with P.R.R. including hire and running charges of P.R.R and all other machineries but including costs and conveyance of bitumen metal and chips as per specification and direction of Engineer-in-charge. (Data for 5889M2)