SPECIAL REPAIRS TO WALL AND CATTLE FENCING AROUND AIR FIELD AT AFA HYDERABAD.

Amount

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any exc 4 kg/Sqm weight complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of PCC solid block masonry of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for Removal and Refixing of Concertina coil (Two layered) 0.9 m dia complete all as specified and as directed.

S&F in repairs concertina coil 900 mm dia(in stretched position) hot dip galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dovetail clips (18 SWG) fixed over razor wire with angle iron. The concertina coil to be fixed with razor wire at points wherever coil touches bottom of barbed wire with the help of hog rings (14 SWG) complete all as specified and as directed.

M&L for Plain cement concrete 1:4:8 type D-2 mix using 40 mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and as directed.

M&L for PCC solid block masonry (except blocks) exc 10 cm in width type C-1 (1:3:6) (using 20 mm graded stone agregate) built in cement mortar (1:4) complete all as specified and as directed.

M&L for PCC solid block masonry exc 10 cm in width type C-1 (1:3:6) (using 20 mm graded stone agregate) built in cement mortar (1:4) complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Refixing only Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for Providing, cement concrete 1:2:4 type B-0 mix (using 12.5 mm graded stone aggeregat) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates,kerbs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

M&L for Reinforced Cement Concrete M-25 (Design Mix) (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed,

M&L for Reinforced Cement Concrete M-25 (Design Mix) (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

M&L for rendering 15 mm thick on fair face of brick or concrete surfaces in cement mortar (1:4) and rendering is to be finished even and fair complete all as specified and as directed.

S & F mild steel fencing posts and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E 165 complete all as specified and as directed.

Refixing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe 290 Gde E 165 complete all as specified and as directed.

M&L for MS round bars 10 mm dia of Fe-410-(Gde.E-250) quality-A and over cut to length bent to shape required incl bending hooking ends necessary to fix with angle iron post / wall complete all as specified and as directed

M&L for MS bolts machine made with hexognal or square head one end and scured and other or screwed both end each scewed end to be fitted with 2 washers and one hexonal or square 75 mm long, dia of neck 10 mm length of bolt exc 5 cm and n exc 10 cm long complete all as specified and as directed.

Supply Only galvanised chain link fencing, 40 mm x 40 mm x 4 mm complete all as specified and as directed.

Fixing Only chain link fening including line wires, any mesh, size type to any type of standards, rails,straining bolts, etc. including provision of binding wire complete all as specified and as directed.

M&L for Preparing new surfaces of steel and iron work of any description and treated with tar or coal tar black paint area tarred exc 0.1 Sqm but n exc 0.50 Sqm each (ends of fencing posts and struts) complete all as specified and as directed.

M&L for preparing new or previously untreated surfaces of steel of any des-cription, over 10 cm in width or grith, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparing new or previously untreated surfaces of steel of any description, not exc 10 cm in width or grith, not otherwise described, and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 mix using 40 mm graded stone aggregate as in subbase complete all as specified and as directed.

M&L for 75 mm thick Plain cement concrete (1:3:6) type C-1 mix using 20 mm graded stone aggregate as in flooring etc and finished even and fair without using extra cement complete all as specified and as directed.

S&F in repairs Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed (each line wire to be measured) complete all as specified and as directed.

M & L for preparing new plastered or unplastered surfaces on walls including cornices and applying two coats of cement base paint over a coat of chalk whiting primer complete all as specified and as directed .

M/s Amit Associates

M/s RAMA LAKSHMI CONSTRUCTIONS

Dwarka Pershad Radhey Ramanlal

power links

KENZ CONSTRUCTIONS