Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹22.7 LAccepted-AOC 0 MATADIN KAKRAHI KAKRAHI BHARTHANA ETAWA ETAWAH UTTAR PRADESH 206242 | ETAWAH | UTTAR PRADESH | 206242 | L 1 | Accepted-AOC L1 | |
| 2 | L 2₹23.9 L+₹1.2 L (5.30%)Rejected-Finance | L 2 | Rejected-Finance L 2 |
Tender Value
₹20.7 L
EMD Value
₹38,500
Closing Date
12 Jun 2020, 10:25 amClosed
Executive Engineer
Executive Engineer HPPWD Division Barsar
C/O Building portion i/c W.S. and S.I. and septic tank etc. on 1st floor at PWD coloney at Barsar
2020_PWD_37776_1
C/O 02 Nos. Type-III Qtr.
Open Tender
Civil Works - Buildings
Item Rate
270 days
Brasar
Please refer Tender documents.
13 documents required · 13 mandatory
₹500
Executive Engineer HPPWD Division Barsar
₹38,500
22 Jun 2020
2 Jun 2020
12 Jun 2020
2 Jun 2020
12 Jun 2020
2 Jun 2020
Amount
Excavation in foundation, trenches etcetera in all classification of soil such as pick work jumper work, pick jumper work blasting work and soft rock work in dry or saturated conditions upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable materials separately as directed and then returning the stacked soil in 15cm (fifteen centimeters)layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth within all leads and lifts as directed by the Engineer-in-charge and including entire carriage of material in all leads and lifts disposed materials to be neatly leveled. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Excavation in drain channel etc. in all classification of soil pick work , jumper work, blasting work hard blasting work in dry of saturated condition upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and un serviceable material separately as directed & then returning the stacked soil in 15 cm (fifteen centimeter) layers, when required in to plinth sides of foundation etc. consolidation each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth within all leads and lifts as directed by the Engineer-in- Charge including entire carriage of material in all leads and lifts disposed material to be neatly dressed and leveled. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Filling of plinth with sand under floor including watering, ramming, consolidating and dressing complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etc. up to any thickness, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkana, Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.
Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto any depth/heights, up to all floor level and as directed by the Engineer-in-Charge including carriage materials of within all leads, lifts and other incidentals.The rate including Royality, Malkana, Octroi, Toll Tax GST or any other taxes imposed by the Government.
Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular/ polygonal in plan), up to all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, Toll Tax GST or any other taxes imposed by the Government.
Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering, strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses, plinth and string courses and the like, up to all heights complete as per HPPWD specification and as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including, Octroi, Toll Tax GST or any other taxes imposed by the Government.
Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkana, Octroi, Toll Tax GST or any other taxes imposed by the Government.
Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate including Royality, Malhana, Octroi, Toll tax ,GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, excluding the cost of form work in foundation and plinth/under floors in all depths including pumping or bailing out water/dewatering and removal of slush as required at site complete as per HPPWD specifications and as directed by the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkana, Royality, Octroi, toll tax, GST or any taxes imposed by the Government.
Providing and laying cement concrete 1:4:8 (one cement : Four sand : eight graded /crushed /broken stone aggregate) 40mm (forty millimeter) nominal size mechanically mixed and vibrated and curing complete excluding cost of centering , shuttering depressed portion all floor level . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and laying cement concrete 1:2:4( One cement : Two sand : four graded crushed stone) aggregate 20mm(Twenty millimeter) nominal size mechanically mixed and vibrated reinforced cement concrete in chajja up to any thickness including finished the exposed surface with cement motor 1:3 (one cement : three sand) to give a smooth and even surface centring / form work and curing complete excluding the cost of reinforcement etc. up to any floor level including carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 330 kg (three hundred thirty) Killogram per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in wall any thickness including attached pilasters, buttresses, plinth and string course etc. from top of foundation upto all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkana, Royality, Octroi, toll tax GST or any taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 320 Kg (three hundred twenty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landings and shelves and their supports, balconies, beams, girders, bressumers cantilevers and the like shelves and work tops etcetera in all upto all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkana, Royality, Octroi, toll tax , GST or any taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated plain/reinforced cement concrete Grade-M-25 (M-Twenty five) nominal mix 1:1.5:3 (One cement isto one and half sand isto three graded crushed stone aggregate 20mm (Twenty millimeter) nominal size in open foundation footing bases of cloumns and the linke and mass concrete excluding the cost of form work and cost of reinforcement for reinforced concrete work and curing complete as per satisfaction and direction of Engineer-in-Charge, including carriage of materials up to all leads, lifts. The rates including Royality, Malkhana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing and laying mechanically mixed and vibrated plain/reinforced cement concrete Grade-M-25 (M-Twenty five) nominal mix 1:1.5:3 (One cement isto one and half sand isto three graded crushed stone aggregate 20mm (Twenty millimeter) nominal size in suspended floor roofs, landings and shelves and their supports, balconies, beams, girders, bressumers cantilevers and the like shelves and work tops etcetera in all upto all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge excluding the cost of form work and curing complete but excluding cost of reinforcement for reinforced concrete work as per satisfaction and direction of Engineer-in-Charge, including carriage of materials up to all leads, lifts. The rates including Royality, Malkhana, Octroi, toll tax, GST or any other taxes imposed by the Government.
Providing and laying TISCON ,SAIL ,TATA JINDAL, steel reinforcement for reinforced cement concrete work including bending, binding straightening and placing in position complete in all heights in any floor including cost of bending binding wire etc. including entire carriage of material in all leads and lifts The rates are inclusive octroi , royality , Malkana, toll tax, GSTor other taxes imposed by the Government . .
Applying cement slurry on RCC slab or cement concrete work using 2.75kgs(two point seven five kilogram) of cement per square metre of floor area before laying cement concrete flooring including roughening cleaning of the concrete surface complete including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Brick work using Second class common burnt clay buildings bricks in foundation and plinth level upto all floor level in cement mortar 1:6 (one cement : six sand) and curing complete including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate including Royality, Malkana, Octroi, Toll Tax GST or any other taxes imposed by the Government.
Second class half brick work using common burnt clay building bricks in foundation plinth level upto all heights/floor level in cement mortar 1:4 (one cement : four sand) and curing complete including carriage of materials within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate including Royality, Malkana, Octroi, Toll Tax GST or any other taxes imposed by the Government.
Random rubble masonry / polygonal rubble masonry un-coursed brought to courses with hard stone of approved quality foundation and plinth in cement motor 1:6(one cement : six sand) including leveling up with cement concrete 1:6:12 (One Cement : six Sand : Twelve graded/ crushed stone aggregate 20mm( twenty millimetre ) nominal size including entire carriage of materials in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Squared rubble masonry coursed with hard stones of approved quality in super structure including raking out joints in cement mortar 1:4 (One Cement : four Sand) and curing complete and as per entire satisfaction of the Engineer-in-charge including carriage of materials in all leads and lifts, in all heights . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and laying 40mm (forty millimetre ) thick Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm(twenty millimetre) nominal size)laid in one layer finished with a floating coat of neat Cement including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and laying 50mm (fifty millimetre ) thick Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm(twenty millimetre) nominal size)laid in one layer finished with a floating coat of neat Cement including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Supplying and fixing rolling shutters of approved make made of 80 mm X 1.25mm ( eighty millimetre into one point two five millimetre) M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft,with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring.Shutters having width below 3.5 metres (three point five metre) including applying a priming coat of red lead paint including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and fixing angle iron cupboard frames manufactured from M.S.Angle iron section 25X25X5mm thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-inCharge. including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and fixing angle iron door, windows ,CW frame manufactured from Mild steel angle 40x40x6mm(forty into forty into six millimetre) including hings, jamps, lock jamb bead and it required angle threshold of mild steel 50x25mm(fifty millimetre into twenty five millimetre) welded or rigidly fixed by mechanically means lugs with splits ends rail to each jump including steel butt hinges 2.5mm(two point five millmetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of steel primer complete including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing double rebate angle iron door, windows ,CW frame manufactured from Mild steel angle 50x50x6mm(fifty into fifty into six millimetre) including hings, jamps, lock jamb bead and it required angle threshold of mild steel 50x25mm(fifty millimetre into twenty five millimetre) welded or rigidly fixed by mechanically means lugs with splits ends rail to each jump including steel butt hinges 2.5mm(two point five millmetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of steel primer complete including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm (sixteen into three point fifteen millimetre) lugs 10 cm. (ten centimetre ) long embedded in cement concrete blocks 15 cmx10cmx10cm(fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (1 cement:3 sand:6 graded stone aggregate 20mm (twenty millimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint including entire carriage of material in all leads and lifts. The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government . Fixed Steel Window
Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm (sixteen into three point fifteen millimetre) lugs 10 cm. (ten centimetre ) long embedded in cement concrete blocks 15 cmx10cmx10cm(fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (1 cement:3 sand:6 graded stone aggregate 20mm (twenty millimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint including entire carriage of material in all leads and lifts. The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government . Side Hung Window
Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm (sixteen into three point fifteen millimetre) lugs 10 cm. (ten centimetre ) long embedded in cement concrete blocks 15 cmx10cmx10cm(fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (1 cement:3 sand:6 graded stone aggregate 20mm (twenty millimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint including entire carriage of material in all leads and lifts. The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government . Single Leaf Door
Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm (sixteen into three point fifteen millimetre) lugs 10 cm. (ten centimetre ) long embedded in cement concrete blocks 15 cmx10cmx10cm(fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (1 cement:3 sand:6 graded stone aggregate 20mm (twenty millimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint including entire carriage of material in all leads and lifts. The rates are inclusive octroi , royality , Malkana, toll tax, GST, sale tax or other taxes imposed by the Government . Double Leaf Door
Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm (sixteen into three point fifteen millimetre) lugs 10 cm. (ten centimetre ) long embedded in cement concrete blocks 15 cmx10cmx10cm(fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (1 cement:3 sand:6 graded stone aggregate 20mm (twenty millimetre) nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint including entire carriage of material in all leads and lifts. The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government . Centre hung Ventilator
Providing and fixing 10mm (ten millimeter) thick antiskid water proof stain and impect resistent heavy duty vitrified tiles Kajariaria , NITCO 600x600mmx10mm(six hundred into six hundred millimeter into ten millimeter) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm(twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
White glazed tiles 6 mm (six millimetre ) thick in flooring, treads of steps and landing laid on a bed of 12 mm(twelve millimetre) thick cement mortar 1:3 (1 cement :3 sand) finished with flush pointing in white cement. including entire carriage of material in all leads and lift The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and laying Duro stone vitrified tiles Kajaria , NITCO (300x300mmx8mm) (three hundred into three hundred millimeter into eight millimeter) in grey/coloured of required shade in skirting risers of steps and dados on 12mm (twelve millimetre )thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and laying 6mm( six millimeter) thick cement plaster to ceiling in cement mortar 1:3( one cement : three sand )finished with floating coat of neat cement and thick upto any floor level heights including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
15mm (fifteen millimeters) thick cement plaster in single coat on the rough side of brick concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimeters) in girth and finished even and smooth in cement mortar 1:6 (One cement : Six sand) and curing complete as per entire satisfaction of the Engineer-in-charge including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
15mm (Fifteen millimeters) thick cement plaster in single coat on fair side of brick concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimeters) in girth and finished even and smooth in cement mortar 1:6 (One cement : six sand) and curing complete as per entire satisfaction of the Engineer-in-charge including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
20mm (twenty millimeters) thick cement plaster in single coat on the rough side of brick concrete/stone walls for interior plastering upto all floors level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty millimeters) in girth and finished even and smooth in cement mortar 1:4 (One cement : four sand) and curing complete as per entire satisfaction of the Engineer-in-charge including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete.With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax,GST or other taxes imposed by the Government
Painting two costs made of Nerolac , Berger, Asian paint of approved quality (excluding priming cost on new steel and other metal surfaces eith enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter etcetera including sand paper smooth complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Distempering two coats with oil bound made of Nerolac , Berger, Asian paint washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free form mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth complete as per entire satisfaction of the Engineer-in-charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropping dust loose material and other foreign matter sand papered smooth to give final finish t the surface complete including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and laying wall ceiling and floor galvanized mild steel tube ( medium graded tube fitting and clamps including making good the wall ceiling and floor 20mm( Twenty milimetre) nominal bore . including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and laying in trenches galvanised mild steel tube ( medium graded tube fitting (earth work in trenches to be measured and paid for separately 20mm( Twenty milimetre) nominal bore . including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and laying making connection of galvanized mild steel tube distribution branch with galvanized mild steel tube 20mm to 40mm (twenty millimeter to forty millimeter ) nominal size tee including cutting and threading etcetera including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Fixing water metre and stop cock in galvanised mild steel tube including necessary fitting such as mild steel galvanised jam nut socket etcetera cutting making long screws complete (water metre and stop cock to be paid for separately 20mm (twenty millimetre) nominal bore. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and fixing composite pressure pipe confirming to IS-15450 2004 for cold water supply e.g tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government Equal Tees 1216mm size( one thousand two hundred sixteen millimetre)
Providing and fixing composite pressure pipe confirming to IS-15450 2004 for cold water supply e.g tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government Equal Tees 1620 mm size( one thousand six hundred Twenty millimetre)
Providing and fixing composite pressure pipe confirming to IS-15450 2004 for cold water supply e.g tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government Reducing Tee 1620 mm size( one thousand six hundred Twenty millimetre) all branches
Providing and fixing composite pressure pipe confirming to IS-15450 2004 for cold water supply e.g tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government Female branch Tee 1216x1216x15mm thread
Providing and fixing composite pressure pipe confirming to IS-15450 2004 for cold water supply e.g tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government Female branch Tee 1620x1620x20 mm thread
Providing and fixing composite pressure pipe confirming to IS-15450 2004 for cold water supply e.g tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government Female elbows 1216x15 mm thread
Providing and fixing composite pressure pipe confirming to IS-15450 2004 for cold water supply e.g tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government Female elbows 1620x15 mm thread
Providing and fixing composite pressure pipe confirming to IS-15450 2004 for cold water supply e.g tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government Male thread connector 1216x15 mm
Providing and fixing composite pressure pipe confirming to IS-15450 2004 for cold water supply e.g tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government Male thread connector 1620x15 mm
Providing and fixing composite pressure pipe confirming to IS-15450 2004 for cold water supply e.g tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government Female thread connector 1216x15 mm
Providing and fixing composite pressure pipe confirming to IS-15450 2004 for cold water supply e.g tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government Female elbows 1620x15 mm thread
Providing and fixing composite pressure pipe confirming to IS-15450 2004 for cold water supply e.g tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government Couplers 1216 mm
Providing and fixing composite pressure pipe confirming to IS-15450 2004 for cold water supply e.g tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government Couplers 1620 mm
Providing and fixing composite pressure pipe confirming to IS-15450 2004 for cold water supply e.g tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government Reducers 1620x1216 mm
Providing and fixing Polyethylene- Aluminum Polyethylene (PE-AL-PE) composite internal seal compression fittings as per IS-15450-U.V stablized with carbon black having thermal stability for hot water supply including with clamps at 1.00 metre spacing cutting fixing and making good the wall but excluding the cost of fitting( internal work) pipes concealed in the wall with cutting chases and making good the wall. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . 1216mm (16mm O.D pipe)
Providing and fixing Polyethylene- Aluminum Polyethylene (PE-AL-PE) composite internal seal compression fittings as per IS-15450-U.V stablized with carbon black having thermal stability for hot water supply including with clamps at 1.00 metre spacing cutting fixing and making good the wall but excluding the cost of fitting( internal work) pipes concealed in the wall with cutting chases and making good the wall. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . 1620mm (20mm O.D pipe)
Providing and fixing Polyethylene- Aluminum Polyethylene (PE-AL-PE) composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees, elbows ,reducers , connectors ,couplers and clamps with jointing testing and fixing including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . 1216 mm Equal tees )
Providing and fixing Polyethylene- Aluminum Polyethylene (PE-AL-PE) composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees, elbows ,reducers , connectors ,couplers and clamps with jointing testing and fixing including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . 1620mm all branches reducing tees )
Providing and fixing Polyethylene- Aluminum Polyethylene (PE-AL-PE) composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees, elbows ,reducers , connectors ,couplers and clamps with jointing testing and fixing including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . Female branch Tee 1216x1216x15mm thread
Providing and fixing Polyethylene- Aluminum Polyethylene (PE-AL-PE) composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees, elbows ,reducers , connectors ,couplers and clamps with jointing testing and fixing including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . Female branch Tee 1620x1620x20mm thread
Providing and fixing Polyethylene- Aluminum Polyethylene (PE-AL-PE) composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees, elbows ,reducers , connectors ,couplers and clamps with jointing testing and fixing including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . Female elbow 1216x15mm thread
Providing and fixing Polyethylene- Aluminum Polyethylene (PE-AL-PE) composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees, elbows ,reducers , connectors ,couplers and clamps with jointing testing and fixing including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . Female elbow 1620x20mm thread
Providing and fixing Polyethylene- Aluminum Polyethylene (PE-AL-PE) composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees, elbows ,reducers , connectors ,couplers and clamps with jointing testing and fixing including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . Male thread connector 1216x15mm thread
Providing and fixing Polyethylene- Aluminum Polyethylene (PE-AL-PE) composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees, elbows ,reducers , connectors ,couplers and clamps with jointing testing and fixing including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . Male thread connector 1620x15mm thread
Providing and fixing Polyethylene- Aluminum Polyethylene (PE-AL-PE) composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees, elbows ,reducers , connectors ,couplers and clamps with jointing testing and fixing including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . Female thread connector 1216x15mm thread
Providing and fixing Polyethylene- Aluminum Polyethylene (PE-AL-PE) composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees, elbows ,reducers , connectors ,couplers and clamps with jointing testing and fixing including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . Female thread connector 1620x15mm thread
Providing and fixing Polyethylene- Aluminum Polyethylene (PE-AL-PE) composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees, elbows ,reducers , connectors ,couplers and clamps with jointing testing and fixing including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . Couplers 1216mm
Providing and fixing Polyethylene- Aluminum Polyethylene (PE-AL-PE) composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees, elbows ,reducers , connectors ,couplers and clamps with jointing testing and fixing including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . Couplers 1620mm
Providing and fixing Polyethylene- Aluminum Polyethylene (PE-AL-PE) composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees, elbows ,reducers , connectors ,couplers and clamps with jointing testing and fixing including cutting and making good the walls etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government . Reducers 1620x1216 mm
Providing and fixing high pressure made of Paryware , Hindware , Cera/finolex of following dia PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 150mm ( one hundred fifty millimetre ) nominal size
Providing and fixing high pressure made of Paryware , Hindware , Cera/finolex of following dia PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 110mm ( one hundred ten millimetre ) nominal size
Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 150mm ( one hundred fifty millimetre ) nominal size
Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 110mm ( one hundred ten millimetre ) nominal size
Providing and fixing PVC single equal branch plain ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 150mm ( one hundred fifty millimetre ) nominal size
Providing and fixing PVC single equal branch plain ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 110mm ( one hundred ten millimetre ) nominal size
Providing and fixing PVC collars ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 150mm ( one hundred fifty millimetre ) nominal size
Providing and fixing PVC collars ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 110mm ( one hundred ten millimetre ) nominal size
Providing and fixing PVC plain bend ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 150mm ( one hundred fifty millimetre ) nominal size
Providing and fixing PVC plain bend ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 110mm ( one hundred ten millimetre ) nominal size
Providing and fixing PVC offset 45 degree ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 150mm ( one hundred fifty millimetre ) nominal size
Providing and fixing PVC offset 45 degree ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 110mm ( one hundred ten millimetre ) nominal size
Providing and fixing PVC double equal branch with oval acces door insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 150mm ( one hundred fifty millimetre ) nominal size
Providing and fixing PVC double equal branch with oval acces door insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 110mm ( one hundred ten millimetre ) nominal size
Providing and fixing PVC plain double equal branch ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 150mm ( one hundred fifty millimetre ) nominal size
Providing and fixing PVC plain double equal branch ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 110mm ( one hundred ten millimetre ) nominal size
Providing and fixing PVC clamps ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 150mm ( one hundred fifty millimetre ) nominal size
Providing and fixing PVC clamps ISI marked complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 110mm ( one hundred ten millimetre ) nominal size
Providing and fixing PVC floor traps ISI marked of self cleaning design complete including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 110mmx90mm ( one hundred ten millimetre into ninety millimetre ) nominal size
Providing and fixing PVC reducer ISI marked including jointing fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 150mmx110mm ( one hundred fifty millimetre into one hundred ten millimetre ) nominal size
Providing and fixing PVC reducer ISI marked including jointing fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 110mmx90mm ( one hundred ten millimetre into ninety millimetre ) nominal size
Providing and fixing PVC 'P' or 'S' trap for water closet (squatting pan) ISI marked complete including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 150mm ( one hundred fifty millimetre ) nominal size
Providing and fixing PVC cowl complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 150mm ( one hundred fifty millimetre ) nominal size
Providing and fixing PVC cowl complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 110mm ( one hundred ten millimetre ) nominal size
Chase in stone / brick masonary walls for fixing sand cast iron/ cast /spun iron pipes and fitting including making good the same with stone/ brick work in cement mortar 1:3 (one cement isto three sand ) including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government 150mm ( one hundred fifty millimetre ) nominal size
Providing and fixing viterous Chiana wash down water closet (European Type W.C pan) made of Paryware , Hindware , Cera with integral ‘P’ or ‘S’ trap including jointing the trap with soil pipe in cement mortar1:1(one cement : one sand) seat and cover to be paid for separately including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government Ordinay closet or equivalent
Providing and fixing AMC, Unik , Diamond 5.00 liter (five liter ) capacity PVC low level duel flushing cistern with a pair of brackets with fittings such as lead valve less sypon 15mm (Fifteen millimeters) nominal size PVC ball valve with polythene float PVC handle unions and coupling for connections with inlet, outlet and overflow pipes 40mm (Forty millimeters) dia PVC flush bend with cistern and closet (overflow pipe to be measured and paid for separately )complete . including carriage of material within all leads and lifts and other incidentals The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government
Providing and fixing plastic seat (Solid/ Hollow type) Parryware ,Hind ware ,Cera and cover for wash down water closet with C.P brass hinges and rubber buffers (solid type white plastic seat and cover ) including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and fixing G.I inlet connection for flush pipe with G.I pan including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and fixing viterous China wash basin of size 450x350mm made of Paryware , Hindware , Cera (Four hundred fifty into into three hundred fifty millimeters) with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding fitting including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and fixing stainless steel sink made of AMC Diamond 470x420mm (four hundred seventy into four hundred twenty millimetre) with bowl depth 178mm one hundred seventy eighty millimeters) of approved standard ISI make with drain board and C.P waste with cast iron or mild steel brackets painted white including cutting holes in wall and making good the same but excluding fitting . including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and fixing Parryware ,Hind ware ,Cera Viterous China pedestal for wash basin complete recessed at the back for reception pipe and fittings including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and fixing 15mm (Fifteen millimeters) dia PVC connections pipe with brass union 50 cm (Fifty centimeters) long complete as per entire satisfaction of the Engineer-in-charge including carriage of materials in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and fixing 32mm (Thirty two millimeters) dia C.P Brass waste pipe for wash basin or sink including brass check nut Cera make complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing M.I. Union made of Unik, KS, AMCO 32mm (Thirty two millimeters) dia for wash basin & sink complete as per entire satisfaction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and fixing C.P 'S' trap (heavy duty ISI marked IS 8931& 8934) for wash basin or sink including brass check nut Cera make complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing 100mm (one hundred millimetre) dia C.P grating for floor or nahani / gully/ floor trap complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing galvinished mild steel puff pipe 1.00 metre (one metre) long with brass preforated cap with 15mm (fifteen millimetre) dia complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing 600x450 (Six hundred into four hundred fifty) bevelled edge mirror made of Modi guard, Atul golden fist of superior glass mounted on 6mm (Six millimeters) thick AC sheet or plywood sheet and fixed to wooden plug with C.P. brass screws and washers complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing 600x20mm ( six hundred into twenty millimeters) made of Jaguar, Jal, essess dia C.P. brass towel rail (heavy duty ISI marked IS 8931 &8934 )complete with C.P brass brackets fixed to wooden plugs with C.P brass screws complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing made of Jaguar ,Jal ,essess C.P brass toilet paper holder with screws complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing 600x120mm ( six hundred into one hundred twenty millimetre) glass shelf with made of Jaguar ,Jal ,essess C.P brass and guard rail complete fixed to wooden plugs with C.P.brass screw complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing made of Jaguar, Jal ,essess chromium plated brass soap dish with C.P brass brackets fixed to wooden cleats with C.P brass screws . complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing made of Jaguar, Jal ,essess 100mm (one hundred millimetre) dia C.P brass shower rose(heavy duty ISI marked IS8931&8934) with 15mm(fifteen millimetre) or 20mm (twenty millimetre) inlet complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing made of Jaguar, Jal ,essess C.P brass bib tap (heavy duty ISI marked IS 8931 & 8934) 15mm(fifteen millimeter ) dia complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing made of Jaguar, Jal, essess C.P brass pillar tap with capstan head ( heavy duty ISI marked IS 8931 & 8934) 15mm(fifteen millimeter) dia complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing made of Jaguar, Jal ,essess C.P brass stop cock ( heavy duty ISI marked IS 8931 & 8934) 15mm(fifteen millimeter) dia complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing made of Jaguar, Jal, essess C.P brass angle valve ( heavy duty ISI marked IS 8931 & 8934) 15mm(fifteen millimeter) dia complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing 45cm (forty five centimetre) PVC connection pipe ( heavy duty ISI marked IS 8931 & 8934) with bras union 15mm(fifteen millimeter) finolex/ Diplast / supreme nominal bore complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing brass full way valve with wheel 15mm (fifteen millimeter) nominal bore complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing brass full way valve (horizontal plunger type) high pressure with polythene plastic floats with wheel 15mm (fifteen millimeter) nominal bore complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing G.I or M.I Union of following sizes( where not included in the item) 15mm (fifteen millimeter) nominal bore complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing G.I or M.I Union of following sizes( where not included in the item) 20mm (twenty millimeter) nominal bore complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing PTMT fancy bib cock with spout No 1391 of approved quality and colour 15mm (fifteen millimeter) nominal bore complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing PTMT fancy pillar cock with spout No 1391 of approved quality and colour 15mm (fifteen millimeter) nominal bore complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing PTMT push cock of prayag with reducer of approved quality and colour 20mm to 15mm ( twenty millimetre into fifteen millimeter) nominal bore complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing PTMT concealed stop cock of prayag with flange of approved quality and colour 15mm (fifteen millimeter) nominal bore complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing PTMT angle cock of prayag with flange of approved quality and colour 15mm (fifteen millimeter) nominal bore complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing 150mm (one hundred fifty millimetre) dia (to level or slopes) and jointing with approved adhesive high pressure PVC spigot and socket waste and ventilating pipe 150mm (one hundred fifty millimetre) dia in trenches complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and laying cement concrete 1:3:6 ( one cement : three sand : six graded stone aggregate 40mm) (forty millimetre) nominal size bedding for stoneware pipe of the following internal diametrs, necessary form work and curing complete 150mm (one hundred fifty millimetre) dia complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and laying cement concrete 1:4:8( one cement : four sand : eight graded stone aggregate) 40mm (forty millimetre) nominal size for surround or in casing PVC pipe of the following internal diametrs, necessary form work and curing complete 150mm (one hundred fifty millimetre) dia complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and laying jointing and pointing with a stiff mixture of cement mortar in proportion of 1:1 ( one cement : one sand ) internal diametrs, salt glazed stoneware grade ,A, half round channels 150mm (one hundred fifty millimetre) dia complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Constructing man holes with RCc top slab in 1:2:4 (One cement : two sand : four graded crushed stone aggregate) 20mm (Twenty millimeters) nominal size mix foundation concrete 1:4:8 (One cement : four sand : Eight graded crushed stone aggregate) 40mm (Forty millimeters) nominal size inside plastering 15mm (Fifteen millimeters) thick with cement mortar 1:3 (One cement : three sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 mix (One cement : two sand : four graded crushed stone aggregate) 20mm (Twenty millimeters) nominal size finished smooth complete. Inside size 800x800x500mm (Eight hundred into eight hundred into five hundred millimeters) deep including cast iron cover with frame(light duty single seal pattern-I ) 455x610mm (Four hundred fifty five into six hundred ten millimeters) Internal dimensions total weight of cover and frame to be not less than 38kg (Thirty eight kilogramme) weight of cover 23 kg(twenty three kilogram) and weight of frame 15kg(fifteen kilogram) with 200mm (two hundred millimetre) thick wall of brick masonry using common burnt clay building bricks in CM 1:3 ( One cement : Three Sand ) complete including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Inside size 800x800x1000mm (Eight hundred into eight hundred into one thousand millimeters) deep including cast iron cover and frame(light duty single seal pattern-I ) 455x610mm (Four hundred fifty five into six hundred ten millimeters) Internal dimensions total weight of cover and frame to be not less than 38kg (Thirty eight kilogramme) weight of cover 23 kg(twenty three kilogram) and weight of frame 15kg(fifteen kilogram) with 200mm (two hundred millimetre) thick wall of brick masonry using common burnt clay building bricks in CM 1:3 ( One cement : Three Sand ) complete including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and fixing C.I cover without frame for manhole for frame of internal dia metre 455x610mm(Four hundred fifty five into six hundred ten millimeter ) internal dimensions total weight of cover and frame to be not less than 23kg(twenty three kilogramme) including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and fixing C.I cover without frame for manhole for frame of internal dia metre 500 (Five r hundred millimeter ) internal dimensions total weight of cover and frame to be not less than 23kg(twenty three kilogramme) including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and fixing 1216mm (16mm O.D pipe)(Sixteen millimetre) polythene aluminum polythene (PE-AI-PE) composite pressure pipe UV stabilized with carbon black conforming to IS-15450-2004 water supply including clam at one metre spacing cutting fixing and making good the wall etcetera but excluding the cost of fitting (internal work) pipe exposed on wall as per entire satisfaction of the Engineer-in-charge including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and fixing 1620 (20mm O.D pipe)(twenty millimetre) polythene aluminum polythene (PE-AI-PE) composite pressure pipe UV stabilized with carbon black conforming to IS-15450-2004 water supply including clam at one metre spacing cutting fixing and making good the wall etcetera but excluding the cost of fitting (internal work) pipe exposed on wall as per entire satisfaction of the Engineer-in-charge including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government
Providing and fixing PVC storage tank made of sintex triple layer ( ISI marked/ Treepal layer) 1000 litre ( one thousand ) litre with 40mm(forty millimeter) nominal size bore galvanized mild steel scour tube with fitting 25mm ( twenty five millimeter) nominal bore galvanized mild steel over flow pipe with fitting and mosquito proof coupling of approved design 15mm( Fifteen millimeter ) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including providing pads to size are required and outlet to be including hoisting upto any height including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax,GST or other taxes imposed by the Government
Providing and fixing single equal branch of required degree with oval access door insertion rubber washer 3mm(three millimetre) 110mm ( one hundred ten millimetre ) nominal bore complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing PVC or cast iron cowl 100mm ( one hundred millimetre ) nominal bore complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Supplying and filling crushed coursed brick bats aggregate in soak pit of following size 25mm (twenty five millimetre) nominal size complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Construction chamber 300mmx300x500mm (three hundred millimetre into three hundred into five hundred millimetre) inside sixe for stop cock with cast iron surface box 100mmx100mmx75mm ( one hundred millimetre into one hundred millimetre into seventy five millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 ( one cement : two sand : four graded stone aggregate ) 20mm (twenty millimetre) nominal size 75mm (seventy five millimetre thick foundation concrete 1:5:10 ( one cement : five sand :ten graded stone aggregate) 40mm( forty millimetre) niminal size and inside plastering with cement mortar 1:3 (one cement : three sand ) finished with a floating coat of net cement including curing complete with 100mm (one hundred millimetre) thick walls of brick masonary in cement mortar 1: 5(one cement : five sand) including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing and fixing C.P brass flush pipe/ spraders for urinal with fittings such as unions clamps etc. (all C.P ) including cutting holes and making good the same 15mm ( fifteen millimetre ) nominal bore complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
Providing lead caulked joints to sand cast / cast iron (spun) iron pipes fitting including testing of joints 100mm ( one hundred millimetre ) nominal bore complete as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
BACHITAR SINGH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .