CERTAIN REPAIR TO ROOF FLOORS JOINERY PLASTER PLUMBING AND OTHER ALLIED WORKS AT 635 SATA BTY 115 ENGR REGT AND 21 FD WORKSHOP VSD AHSI AND ADJACENT AREA UNDER AGE B/R-II OF GE (NORTH) MEERUT CANTT

Amount

Taking down shutters of any description exceeding 1 but not exceeding 2 sqm each, including builders hard ware fittings complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exceeding 1.5 sqm each, complete all as specified and directed. Note :- Rate also including in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exceeding 1.5 sqm but not exceeding 4 sqm each, complete all as specified and directed. Note :- Rate also including in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable to store and rubbish off the premises complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.

Dismantling AC sheet corrugated or semi corrugated sheet inc. ridges of any description as in roof and including removal from the site complete all as specified and directed.

Demolition of wall or ceiling board (fiber,pulp,insulation etc) any thickness including cover fillets and removal from the site complete all as specified and directed.

Taking down of cement or cement lime plaster/skirting/ dado of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads in square not exc 0.50 sqm each pane complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

M&L applying 10 mm thick rendering on ceiling in cement mortar 1:3 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for applying 15mm thick in cement mortar 1:4 rendering using ready mix plaster bags on brick/concrete surface of external wall finished even and fair complete all as specified and directed. Make : Ultratech, redisplays, Birla Acrocem. Note :- Contractor is required to deposit ready mix bags for 100% CA quantity to Engr-in-charge with in 15 days of acceptance of contract.

M&L for preparation of new plastered surface of wall and applying two coats of Acrylic exterior Emulsion paint using rollex for painting complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying two coats of Acrylic exterior Emulsion paint using rollex for painting complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper using roller for painting complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying two coats of oil bound distemper using roller for painting complete all as specified and directed.

Preparing of new plastered surface of ceiling and applying two coats of white wash on ceiling complete all as specified and directed.

Preparing of old plastered surface of ceiling and applying two coats of white wash on ceiling complete all as specified and directed.

S&F 35mm thick plain framed , paneled shutters(any number of panels) with panels of timber that on both sides( feather edged) or of veneered particle board medium density ,wood particle board with commercial face veneers complete all as specified and directed.

S&F 35m thick glazed and skeleton shutter open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) of IInd class hard wood complete all as specified and directed.

S&F steel windows with pressed steel frame made out form 1.25mm thick steel with one or more rebate with glazed shutters and ply proofing shutters including guard bars, hinges peg stay handles tower bolts lugs including treated with for or coal tar black paint on steel surface in contact/embedded in concrete/masonry work complete all as specified and directed. Note- Disturbed surface of wall shall be made good to true surface

S&F steel ventilator with tap hung shutter including hinges steel peg stay complete all as specified and directed.

S&F powder coated anodised aluminum frame for doors windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F anodised aluminum door shutters aluminum section weighing .55kg/m including necessary joining cleats ,glazing clips, rubber neoprene packing handles 2 nos in each door, hinges anodised aluminum snap beading screws etc complete all as specified and directed.

S&F anodised powder coated anodised aluminum window and ventilator shutters fixed type with out sash bar aluminum section weighing 0.55 kg/m including necessary joining cleat , glazing clips rubber packing anodised aluminum snap beading screws etc complete all as specified and directed.

S&F 4.8mm thickness sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F 4.8mm thickness sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F floor door stopper of aluminum alloy body and tongue anodised with hard drawn steel spring fixed in floor overall length of cover plate 140 mm complete all as specified and directed.

S&F door closer hydraulically aluminum (extruded section paty) designation No 3, universal type suitable for door shitter of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

S&F in repair mild steel wire cloth, 0.36 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire stples complete all as specified and directed.

S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of M.S tubes for tap & bottom rail MS frame shall be covered with head moulded plain colors complete all as specified and directed.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 250mm length of bolt aluminum alloy anodised sliding door bolt with h asp ,staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolt and sliding baths of extruded sections or cast aluminum alloy complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.63 mm nominal dia. of wire and avg width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire stples complete all as specified and directed.

S&F aluminum anodised 150mm length of bolt barrel tower bolt of extruded section complete all as specified and directed.

S&F 125mm size of aluminum handles cast type anodized complete all as specified and directed.

S&F Brass chromium plated tubular towel rail 20mm dia , D type 60mmlong between flanges complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

S&F anodised aluminium snap grid frame work for false ceiling suspension system of size of grid 605x605 mm complete all as specified and directed.

S&F 4mm thick non asbestos fiber cement building boards fixed or laid /inserted to timber / GI / aluminum frame work with screws complete all as specified and directed.

S&F 18/19 mm thick prelaminated particle board ,interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws t timber frame and 5mm thick teak wood beads all round to prelaminated boards including piano type hinges complete all as specified and directed.

S&F Fe - 290 (Gde E- 165) for Framed work as in doors , chowkhats or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, support to valley gutters, winties for roof sheets, framing for monkey proofing, welded mesh of pitch as decided by engg-in-charge, support to sign board & fencing post, etc. as specified to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all specified and directed.

S&F Rolled sections Fe 410 -W (grade E-250) quality A as in main and cross beams, base plates, side supports, hip and jack rafters; purlins, winties where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting member as directed and specified and directed by engg - in- charge

M&L for granite(of any type) tiles 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with ad mixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for Providing 75mm thick cement concrete type C-2 1:3:6 (40mm graded aggregate) for plinth protection complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

M&L for Providing 75mm thick cement concrete type B-2 1:2:4(40mm graded aggregate) as in sub base complete all as specified and directed.

S&F in repair 15mm dia pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or with out lettered 'Hot or 'cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm dia brass C.P mixer for mixing hot and cold water screwed docon for iron pipe complete all as specified and directed.

S&F in repair 15mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

Supply and fixed in repairs gun metal globe or gate valves, 15mm bore dia, with iron wheel head, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply and fixed in repairs gun metal globe or gate valves, 20mm bore dia, with iron wheel head, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repairs CP bib tap 15mm bore cast copper alloy with crutch butterfly handle, screwed down and screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm bore bib taps standard of PTMT any colour high pressure screwed for iron pipe or for brass ferrule complete all as specified and directed. (Min weight 15mm - 90gms)

S&F in repairs 20mm plug type bib taps, cast iron screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe (minimum wt 20mm-92grms) complete all as specified and directed.

S&F in repair 15mm bore angle stop valve of PTMT any colour high pressure screwed for iron pipe (minimum wt 15mm-90grms) complete all as specified and directed.

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum red & high density plastic ball screwed for iron pipe(minimum wt 20mm-210grms) complete all as specified and directed.

S&F in repair grating doom 125mm dia with waste holes of PTMT (minimum wt 40 grms) complete all as specified and directed.

S&F in repairs towel ring of PTMT fixed with and including C.P brass screws and wooden /plastic cheat.(minimum wt 90 grms) complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F PVC(SRW) 75mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Taking up or down GI water tubing 15mm bore and connection and removal from the site complete all as specified and directed

Taking up or down GI water tubing 20mm bore and connection and removal from the site complete all as specified and directed

Taking up or down GI water tubing 25mm bore and connection and removal from the site complete all as specified and directed

S&F GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

S&F GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

S&F GI water tubing 25 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

S&F in repair 500 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed tap) hoisted and fixed in position complete all as specified and directed.

All as per Srl item No 75.00 here-in-before but capacity in litre 1000 complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 Ltr capacity symphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

Taking down aluminum shutter exceeding 1sqm but not exceeding 2sqm and refixing some opening after repair of aluminum shutter such as rubbers gasket, hanging of shutter , setting of shutter in original position etc complete all as specified and directed

S&F repair vitreous china half stall urinal complete including providing and fixing plugs beading urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws painting around urinal back in cement , fixing automatic flushing cistern with brackets flush pipe , grating and union for discharge pipe complete all as specified and directed.

S&F in repair of vitreous china squatting pan of pattern "long pan" size 580 x 440 mm white with ‘P’ or S trap, front or back inlet and foot regte any pattern (excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 630X450mm including CP brass15mm pillar tap 32mm CP brass waste coupling waste pipe and brackets complete all as specified and directed.

S&F PTMT multipurpose bath room coloured mirror cabinet storage size height 54cm ,35cm width and 13cm depth wall mount complete all as specified and directed.

M&L for Removal of existing water proofing treatment and providing 15mm thick bedding of cement mortar 1:3 mixed with water proofing compound as per manufactured instruction and applying one coat of bituminous /polymerized primer conforming to IS-3384 @.30 Ltr/sqm and applying of one coat of bounding material using blown type bitumen confirming to IS 702 grade 85/25 @ 1.20Kg/sqm and laying of APP modified men frame pre fabricated reinforced with non woven polyester of 3.50kg/sqm (minimum), 3mm thick(minimum with minimum 75mm side overlaps and 100mm end overlaps and applying one coat of bituminous aluminum paint over APP membrane complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of size 350mmx 250mmx7 mm / 450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

M&L for non skid coloured ceramic tile 7 to 8 mm thick area of each tile exceeding 0.18 but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for vitrified ceramic coloured tiles 10mm thick (Squre / rectangular) polished area of each tiles not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in while or coloured cement over and including 15thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per Srl Item No 87.00 here-in-before but on wall as skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for vitrified ceramic tiles dark shade /double charged tile 7 to 8 mm thick / ultra charged(square/rectangular) polished , area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floors and jointed in near cement slurry and pointed in white or coloured cement to match the colored tiles over 15mm thick screed bed in cement concrete 1:6 complete all as specified and directed.

All as per Srl item No 89.00 here-in-before but on vertical surface over 10mm thick cement mortar 1:4 complete all as specified and directed.

S&F 75mm PVC (SWR)pipe single socketed in any length with rubber ring joints fixed to wall or laid in trenches complete all as specified and directed.

S&F 110mm PVC (SWR)pipe single socketed in any length with rubber ring joints fixed to wall or laid in trenches complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

Taking down eaves gutter and rain water pipe and size any pattern PVC /AC pipe including all fittings heads shoes bands etc including removal to store complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc cement mortar mean radius build in cement mortar 1:6 complete all as specified and directed.

Dismantling timber scantlings 40 sqm and over cum in section in any position unframed work complete all as specified and directed.

All as per Srl item No 97.00 here-in-before but in fillets rails, posts, rafters, purline etc under 40 Sqcm in section complete all as specified and directed.

S&F stainless steel peg set 8 nos in 45cm length stirrup dia of hooks 6mm complete all as specified and directed.

S&F hollow PVC wall lining consisting of 5mm thick plain colour PVC sheet including of solvent cement and fixing at site on PVC frame as per specification and during complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI corrugated steel sheet 0.50mm thick of an green colour having tensile strength of 550mpa as in roof covering cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F prepainted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of green colour having tensile strength of 550mpa as in roof covering/chedding to wall fixed with self tapping screws complete all as specified and directed.

S&F in repair vitreous china white / coloured wash down water closet pan (pedestal pattern) white one piece wall mounted type (inc flushing cistern) including connection to drain or outgoing pipe and to flushing pipe antisyphonage pipe etc includingUF soft closed seat cover complete all as specified and directed Make : Jaquar, Cat No : LYS-WHT-38851P or euivalent in make given in PS

S&F in repair vitreous china coloured wash down water closet pan (pedestal pattern) one piece wall mounted type (inc flushing cistern) including connection to drain or outgoing pipe and to flushing pipe antisyphonage pipe etc includingUF soft closed seat cover complete all as specified and directed.

S&F in repairs 8mm dia , brass chromium plated health faucet with 1 meter long flexible hose and wall hook complete all as specified and directed.

S&F 0.63mm thick plain black, mild steel sheeting in wall cladding , steel gates and similar work, cut to size, holes , punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up mitered angles etc complete all as specified and directed.

M&L machine cut kota stone slab flooring 18-20mm thick over 20mm thick cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per Srl item No 107 here-in-before but on vertical surface over and including 15mm thick rendering to receive kota stone complete all as specified and directed.

B.K.construction

BHAGWAN DAS & Co

veer enterprises

Arun Construction Co.

AEGIS INTERNATIONAL