C.O Stadium at Kilba in District Kinnaur (SH. C.O stage 2 No Green room and sitting tiers providing and fixing W.S. and S.I. septic tank and rain water harvesting tank etc.)

Amount

Cutting in earth work in all kinds of classification, of soils such as pick work, jumper work blasting work saturated soils including chiseling or any other mixed variety of soils, dewatering and / or removal of slush and other incidentals, lift up to any height stacking excavated soil up to all leads and lifts complete in all respect. The recovery amounting to Rs. 58,931/- @ Rs. 170.00 per cubic metre for 346.65 cubic metre useful stones shall be made from the contractor on pro-rata basis in each running bill.

Providing and laying cement concrete 1:3:6 (One cement : three sand : six graded/crushed stone aggregate 40mm (Forty millimetre) nominal size) mechanically mixed and curing complete excluding cost of centring and shuttering in foundation and plinth including carriage of materials within all leads and lifts complete in all respect.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stone of approved quality/quarry in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement : six sand : twelve graded/crushed crushed stone aggregate 20mm (Twenty millimetre) nominal size) at plinth level in cement mortar 1:6 (one cement : six sand) including curing and carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Excavation in foundation, trenches, etcetra in earth work in all kinds of classification, of soils such as pick work, jumper work blasting work saturated soils including chiseling or any other mixed variety of soils, dewatering and / or removal of slush and other incidentals, lift up to any height stacking excavated soil up to all leads and lifts clear from the edge of excavation and then returning the stacked soil in fifteen centimetre thick layer when required into plinths, sides of foundation etcetra consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth to the disposal point within all leads and lifts complete in all respect.

Excavation in drains and channels etcetra in earth work in all kinds of classification of soil such as pick work, jumper work, blasting work, saturated soil including chiseling or any other mixed variety of soil dewatering and / or removal of slush and other incidentals, lifts upto any height, stacking the excavated soil upto all leads and lifts clear from the edge of excavation and then returning the stacked soil in fifteen centimeter thick layers when required into plinth sides of foundation etcetra consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth to the disposal point within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:4:8 (One cement : Four sand : Eight graded/crushed crushed stone aggregate 40mm (Forty millimetre) nominal size) mechanically mixed, vibrated and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in pedestial and pedestial foundation, footings bases of columns etcetera and mass concrete including carriage of materials within all leads and lifts and other incidentals complete in all respect.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beam, cantilever, girders and lintels, sides and soffits of beams beams haunching below supporting cantilevers girders bressumers and lintels of any depth including carriage of materials within all leads and lifts complete in all respect.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars, posts and struts square, rectangular, polygonal in plan including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls of any width including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surface such as soffits of suspended floors, roofs, landings and the like upto any thickness including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing and laying cement concrete 1:1.5:3 (one cement : one and half sand : three graded/crushed stone aggregate 20mm (twenty millimetre) nominal size mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation footings bases of coloumns and the like and mass concrete including carriage of material within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:1.5:3 (one cement : one and half sand : three graded/crushed stone aggregate 20mm (twenty millimetre) nominal size mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landings and shelves and their supports, balconies, beams, girder bressumers and cantilever upto all floor level including carriage of material within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:1.5:3 (one cement : one and half sand : three graded/crushed stone aggregate 20mm (twenty millimetre) nominal size mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars. posts and struts etcetra upto all floor level including carriage of material within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:1.5:3 (one cement : one and half sand : three graded/crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landings and shelves and their supports, balconies, beams, girder bressumers and cantilever upto any floor level including carriage of material within all leads and lifts complete in all respect.

Providing Tor steel reinforcement for RCC work including bending binding and placing in position including cost of binding wire complete in all floors including carriage of materials within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:2:4 (one cement isto two sand isto four with graded/crushed, crushed stone aggregate 20mm (Twenty millimetre) nominal size to give a smooth and even surface including centering and shuttering etcetera but excluding cost of reinforcement in mouldings cornices windows sill etc not exceeding 15cm (fifteen centremetre) in girth including curing complete and carriage of material within all leads, lifts and other incidental charges complete in all respect.

Second class brick work using common burnt clay building bricks of approved kiln in super structure upto all height and depth in cement mortar 1:6 (one cement : six sand) including curing complete and carriage of materials within all leads and lifts complete in all respect.

Second class half brick masonry in common burnt clay building bricks of approved kiln in super structure above plinth level upto floor all level in cement mortar 1:4 (One cement : four sand) and curing complete including carriage of materials within all leads and lifts complete in all respect.

Second class brick work using common burnt clay building bricks of approved kiln in super structure upto all height and depth in cement mortar 1:4 (one cement : four sand) including curing complete and carriage of materials within all leads and lifts complete in all respect.

Stone filling behind retaining walls including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

20cm (twenty centimetre) flagged stone flooring laid in cement mortar 1:5 (one cement : five sand) including curing and carriage of material with in all leads, lifts complete in all respect as per direction of Engineer in Charge

Providing and fixing 40mm (forty millimeter) thick second class deodar wood panelled glazed or panelled and glazed partions fixing to frame with iron screws etcetra complete (frame work to be paid for seperetaly) including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 12mm (twelve millimetre) thick prelaminated board both side bwp phenol bounded exterior/interior grade panelled shutters with 40mm (forty millimetre) thick frame styles and rails of first class deodar wood for doors including bright finished/black enameled iron butt hings with necessary screws as per architectural drawing and approved specification including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 19mm (nineteen millimetre) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails and screw etcetra complete in all respect within all leads, lifts, carriage of material and other incidental charges.

Providing and fixing 300x16mm (Three hundred into sixteen millimeter) anodized heavy duty aluminum sliding door bolt anodized transparent or died to required colour and shade with bolts and nuts screws etcetra as approved by the Engineer-In-Charge complete including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 250x16mm (Two hundred fifty into sixteen millimeter) anodized heavy duty aluminum sliding door bolt anodized transparent or died to required colour and shade with bolts and nuts screws etcetra as approved by the Engineer-In-Charge complete including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 250x10mm (two hundred fifty into ten millimetre) heavy duty aluminum tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etcetra as approved by the Engineer-In-Charge complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 150 x10mm (one hundred fifty into ten millimeter) heavy duty aluminum tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etcetra as approved by the Engineer-In-Charge complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 125mm (One hundred twenty five millimetre) mat finish aluminum heavy duty handles anodized transparent or dyed to required shade and colour with necessary screws etcetra as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 100mm (One hundred millimetre) mat finish aluminum heavy duty handles anodized transparent or dyed to required shade and colour with necessary screws etcetra as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 150mm (one hundred fifty millimetre) bright finished hard drawn hooks and eyes as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing 40x3mm (forty into three millimetre) flat iron hold fast 40cm (forty centimetre) long including fixing to frame with 10mm (ten millimetre) diametre bolts, nuts and wooden plugs and embeding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimetre) 1:3:6 (one cement : three sand : six graded/crushed crushed stone aggregate 20mm (twenty millimetre) nominal size) including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 100mm (one hundred millimetre) bright finished brass floor door stopper with rubber cushion screws etcetra to suit shutter thickness complete in all respect including carriage of materials within all leads, lifts and other incidental charges.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including with in all leads, lifts, carriage of material and other incidental charges complete in all respect.

Providing and laying 20mm twenty millimeter) thick cement concrete toppong 1:2 to 3 (one cement : two to three stone aggregate of size 4.75 mm (four point seven five milimetre) and below, by volume) laid over and finished monolithic with base concrete and curing complete including carriage of materials within all leads and lifts.

25mm (twenty five millimeter) thick cement concrete flooring 1:2:4 (one cement : two sand : four graded/crushed crushed stone aggregate 12.5mm (twelve point five millimeter) and below laidover base concrete and finished with a floating coat of neat cement (base concrete to be paid for seperately) complete in all respect and curing complete including carriage of materials within all leads and lifts.

25mm (twenty five millimeter) thick mirror polish kota stone slab flooring 20mm (twenty millimeter) thick base of cement mortar 1:4 (one cement : four sand) laid over and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and carriage of material within all leads and lifts complete in all respect.

Kota stone slab 25mm (twenty five millimeter) thick in risers of steps, skirting dado and pillars laid on 12mm (twelve millimeter) (average) thick cement mortar 1:3 (one cement : three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing including carriage of material within all leads and lifts complete in all respect.

White glazed tiles 6mm (six millimetre) thick in skirting riser of steps and dado 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry complete upto all floor level in all respect including carriage of materials within all leads and lifts.

Providing and laying spartic ceremic tiles 5.5mm (five point five millimetre) thick in flooring (300x300mm (three hundred into three hundred millimetre) size) treads of steps laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement including carriage of materials within all leads and lifts complete in all respect.

Cement concrete flooring 50mm (fifty millimetre) thick in 1:2:4 (one cement : two sand : four graded/crushed stone aggregate 20mm (twenty millimetre) nominal size) laid in one layer finished with a floating coat of neat cement and curing complete with in all leads, lifts, carriage of materials and other incidental charges complete in all respect.

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Providing and fixing ridges or hips 60cm (sixty centimetre) overall with 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating icluding fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Providing and fixing valley 60cm (sixty centimetre) overall with 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 (five) microns over 5 (five) microns primer coating icluding fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Providing and fixing 0.80mm (zero point eight zero millimetre) thick 15cm (fifteen centimetre) wide and 45cm (forty five centimetre) overall cemicercular plain GI sheet gutter with iron brackets 40x3mm (forty into three millimetre) size bolts and nuts and wahers etcetera including making necessary connection with rain water pipe complete as per design including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 100mm (one hundred millimetre) diametre pipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5kg/sqm (four point five kilogram per square metre) including filling the joints with approved adhesive complete including carriage of materials within all leads, lifts and other incidental charges.

Providing and fixing on wall faces PVC (D-Plast) plain bend 150mm (one hundred fifty millimetre) diametre accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials within all leads, lifts and other incidental charges.

Providing and fixing on wall faces PVC (D-Plast) shoe 150mm (one hundred fifty millimetre) diametre accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials within all leads, lifts and other incidental charges.

Providing and fixing MS BP sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-In-Charge (Base members of steel work shall be measured & paid separately) including carriage of materials within all leads, lifts and other incidental charges.

Steel work welded in built up sections trusses and framed work including cutting, hoisting, fixing and launching in position and applying a priming coat of red lead paint In gratings framed guard bars ladders, railings, brackets and similar works including carriage of materials within all leads and lifts complete in all respect.

Steel work welded in built up sections trusses and framed work including cutting, hoisting, fixing and launching in position and applying a priming coat of red lead paint in trusses and trussed purlins in buildings including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (twenty into ten into two millimetre) and braced with flat iron diagonals 20x5mm (twenty into five millimetre) size with top and bottom rail of T iron 40x40x6mm (forty into forty into six millimetre) with 38mm (thirty eight millimetre) diametre steel pully complete with bolts and nuts locking arrangements, stoppers, handles, including applying a priming coat of red lead paint complete in all respect within all leads, lifts, carriage of material and other incidental charges.

Supplying and fixing plain glass 4mm (four millimetre) thick panes with putty and nials including removal of broken glass panes wherever necessary including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Painting two coats (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint other than white brushing to give an give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of materials within all leads and lifts complete in all respect.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint white brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter with in all leads, lifts, carriage of materials and other incidental charges complete in all respect.

Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing wood primer pink complete including carriage of materials within all leads and lifts complete in all respect.

Painting two coats (excluding priming coat) on new wood and wood based surfaces, with ready mixed paint other than white to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including carriage of materials within all leads and lifts complete in all respect.

6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement : three sand) including curing and carriage of materials within all leads and lifts complete in all respect.

15mm (fifteen millimetre) cement plaster in single coat on the fair side of brick/concrete/stone walls for interior/exterior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including curing and carriage of materials within all leads and lifts complete in all respect.

15mm (fifteen millimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including curing and carriage of materials within all leads and lifts complete in all respect.

20mm (twenty millimeter) cement plaster in two coast on fair side of brick/stone masonry walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (eighty millimeter) in girth and finished even and smooth in cement mortar 1:4 (one cement : four sand) including curing complete and carriage of materials within all leads and lifts complete in all respect.

Applying one coat of Acrylic primer (spectrum or equivalent of superior quality) on new concrete/masonry/plastered surface after and including preparing the surface by thoroughly burshing the surface free from mortar dorppings and other foreign matter, sand papering the surface smooth including carriage of materials within all leads and lifts complete in all respect.

Applying Birla White wall care putty over plaster surface after throughly brushing the suface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the suface including carriage of materials within all leads and lifts complete in all respect.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt and other foreign matter etcetera including sand paper smooth complete including carriage of materials within all leads and lifts complete in all respect.

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droopings and other foreign matter and also including preparing the surface even and sand papered smooth on walls including carriage of material with in all leads, lifts and other incidentals complete in all respect.

Providing under layer for plinth protection of 75mm (seventy five millimeter) thick (unconsolidated) bed of dry brick/stone aggregate 40mm (forty millimeter) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials within all leads and lifts complete in all respect.

Providing plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand : six graded/crushed crushed stone aggregate 20mm (twenty millimeter) nominal size including finishing the top surface of concrete smooth including curing complete and carriage of materials within all leads and lifts complete in all respect.

Constructing course rubble hammer dressed U-Shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement mortar 1:3 (one cement : three sand) including earth work and laying 10cm (ten centimetre) cement concrete in 1:5:10 (one cement : five sand : ten graded/crushed crushed stone aggregate of 40mm (forty millimetre) nominal size) and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded/crushed crushed stone aggregate of twenty millimetre nominal size) and finished with a floating coat of neat cement complete as per standard design including curing and carriage of material with in all leads, lifts complete in all respect as per direction of Engineer in Charge

Providing and fixing 15mm (fifteen millimeter) nominal bore to wall, ceiling and floor galvanized mild steel tubes (medium grade) tube fitting and clamps including making good the walls, ceiling and floor complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 20mm (twenty millimeter) nominal bore to wall, ceiling and floor galvanized mild steel tubes (medium grade) tube fitting and clamps including making good the walls, ceiling and floor complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing Orrisa pattern vitreous China wash down water closet squatting pan (Indian type W.C.pan)size 580mm (five hundred eighty millimetre) (earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 10 to 12.50 ltrs (ten to twelve point five liters) vertious china low level flushing cistern with a pair mild steel bracket compete with fitting such as lead valve less syphon, 15mm (fifteen millimeter) nominal size brass ball valve with polythine float, C.P. brass handles unions and coupling for connections with inlet outlet and over flow pipes 40mm (forty millimeter) diameter C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closetincluding carriage of materials within all leads and lifts complete in all respect.

Providing and fixing flat back 630x450mm (six hundred thirty into four hundred fifty millimeter) vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 32mm (thirty two millimetre) diametre CP brass waste heavy duty for wash basin or sink complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 32mm (thirty two millimetre) diametre MI union for wash basin or sink complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) bavelled edge mirror of superior glass mounted on 6mm (six millimetre) thick AC sheet or ply wood sheet and fixed to wooden plugs with CP brass screws and washers complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing choromium plated brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screws complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 15mm (fifteen millimetre) diametre C.P.brass bib tap heavy duty with capstan head including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 15mm (fifteen millimetre) diametre C.P. brass pillars tap heavy duty capstan head including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 15mm (fifteen millimetre) diameter CP stop cock including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing PVC connection pipe with brass unions 45cm (forty five centimeter) long 15mm (fifteen millimeter) nominal bore complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 15mm (fifteen millimeter) nominal bore brass full way valve with wheel complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 20 mm (twenty millimetre) nominal bore brass full way valve with wheel complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing PVC 1000 ltr. (one thousand litre) water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all height above ground level including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 110mm x 75 mm (one hundred ten into seventy five millimetre) diametre PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hundred ten millimeter) nominal size, high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etcetra complete including carriage of materials within all leads and lifts.

Providing and fixing 110mm (one hundred millimetre) nominal size PVC single equal branch with oval access door, ISI marked insertion rubber washer 3mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetra complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 110 mm dia (one hundred ten millimetre diametre) PVC door bend with oval access door, insertion rubber washer 3 mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 110 mm dia (one hundred ten millimetre diametre) PVC single equal branch plain ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing PVC Plain bend 110mm (one hundred ten millimetre) diametres ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 110 mm dia in (One hundred ten millimetre) PVC Clamps ISI Marked of approved design with steel screws and rawl plugs etc complete all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing PVC 110mm size (One hundred ten millimetre)size “P” or “S” trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and and PVC pipe with approved adhesive etcetra complete including carriage of materials with in all leads, lifts and other incidentals.

providing and fixing 100mm dia (one hundred millimetre)diametre CP grating for gully Nahani traps complete in all respect including carriage of materials within all leads and lifts.

Constructing man hole with RCC top slab in 1:2:4 mix (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) foundation concrete 1:4:8 (One cement : four sand : eight graded crushed stone aggregate 40mm (forty millimetre) nominal size) in side plastering 15mm (fifteen millimetre ) thick with cement mortar 1:3 (one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) finished smooth complete including curing and testing inside size 800x800mm (eight hundred into eight hundred millimetre) and 500mm(five hundred millimetre) deep including CI cover with frame (light duty single seal pattern-I) 455x610mm (four hundred fifty five into six hundred ten millimetre) internal dimension total weight of cover and frame to be not less than 38Kg. (Thirty eight kilograme) (weight of cover 23Kg. (twenty three kilograme) and weight of frame 15Kg. (fifteen Kilogramme) with 200mm (Two hundred millimetre) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (one cement : three sand) as per HP.PWD. specification and as directed by the Engineer-In-Charge complete in all respect including curing and carriage of materials within all leads and lifts.

Constructing man hole with RCC top slab in 1:2:4 mix (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) foundation concrete 1:4:8 (One cement : four sand : eight graded crushed stone aggregate 40mm (forty millimetre) nominal size) in side plastering 15mm (fifteen millimetre ) thick with cement mortar 1:3 (one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) finished smooth complete including curing and testing inside size 800x800mm (eight hundred into eight hundred millimetre) and 500mm(five hundred millimetre) deep including CI cover with frame (light duty single seal pattern-I) 455x610mm (four hundred fifty five into six hundred ten millimetre) internal dimension total weight of cover and frame to be not less than 38Kg. (Thirty eight kilograme) (weight of cover 23Kg. (twenty three kilograme) and weight of frame 15Kg. (fifteen Kilogramme) with 200mm (Two hundred millimetre) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (one cement : three sand) as per HP.PWD. specification and as directed by the Engineer-In-Charge complete in all respect including curing and carriage of materials within all leads and lifts.

Constructing brick masonry chamber for under group C.I inspection chamber and bends with common burnt clay bricks in cement mortar 1:5 (one cement :five sand) C.I cover with frame (light duty) 355x610mm (three hundred fifty five into six hundred ten millimetre) internal dimensions total weight of cover with frame to be not less than 38 Kg. (thirty eight kilogramme) (weight of cover 23 Kg. (twenty three kilogramme) and weight of frame 15 Kg.(fifteen kilogramme)) RCC top slab with 1:2:4mix in (one cement : two sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) foundation concrete 1:5:10 (one cement :five sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) inside plaster 15mm (fifteen millimetre) thick with cement mortar 1:3 (one cement : three sand ) finished smooth with a floating coat of neet cement on walls and bed concrete etcetra complete inside dimensions 455x610x450mm (four hundred fifty five into six hundred ten into four hundred fifty millimetre) deep single pipe line complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing cast iron cover without frame for manholes for frame of 500 mm (five hundred millimetre) internal diametre C.I. cover (medium duty) the weight of cover to be not less than 58 kg. (fifty eight kilograme) including carriage of material with in all leads, lifts and other incidentals complete in all respect.

Providing and fixing cast iron cover 300mmx300mm (three hundred into three hundred millimetre )with frame for for gully trap (standrad design)) the weight of cover to be not less than 4.53 kg. (four point five three kilograme) including carriage of material with in all leads, lifts and other incidentals complete in all respect.

Providing and laying pitching on slope laid over prepared filter media including boulder apron laid dry on front of the embankement complete as per drawing and technical specification and as per the direction of Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and laying (to level or slopes) 100mm (one hundred millimettre) and jointing with stiff mixture or cement mortar in the proportion of 1:1 (one cement isto one sand) slat glazed stoneware pipes grade '"A"of the following internal diametre including testing of pipes and joints complete including carriage of material with in all leads, lifts and other incidentals complete in all respect.

Providing and laying cement concrete 1:4:8 (One cement : Four sand : Eight graded/crushed crushed stone aggregate 40mm (Forty millimetre) nominal size) bedding for stoneware pipes of 100mm (one hundred millimettre) internal diametre, including necessary form work and curing complete including carriage of material with in all leads, lifts and other incidentals complete in all respect.

Providing and fixing cast iron cover without frame for manholes for frame of 455mm x 610mm (four hundred fifty five into six hundred ten millimetre) rectangular internal dimension C.I. cover (light duty single seal pattern-I) the weight of cover to be not less than 23 kg. (twenty three kilograme) including carriage of material with in all leads, lifts and other incidentals complete in all respect.

Providing and fixing 100mm (one hundred millimetre) nominal size sand cast iron/cast iron spun fitting and accessories bends of required degree (any radious) plain bend complete in all respect including carriage of materials within all leads and lifts.

Vinod Kumar

Shakti Singh

Bhagwan singh Negi

Vidya Infrastructure and Developers