Renovation works of Pangara and Attarra IH under IInd sub Division of Ken Canal Division Banda. LOT-06

Amount

First class brick work in C.M. 1:4 with cement and coarse sand i/c all cost of material, labour, and T&P in pangara & Attarra IH

Providing and Laying C.C 1:3:6 with cement, coarse sand and 22.40-53mm stone grit including laying, curing, ramming and all cost material, labour and T&P etc in pangara & Attarra IH

Laying C.C 1:2:4 with cement, coarse sand, 10-19 mm stone grit including laying, curing, ramming, mechanical mixing and all cost of material, labour, T&P etc in pangara & Attarra IH

Laying C.C 1:1.5:3 with cement, coarse sand and 10-19 mm stone grit including laying, curing, mechanical mixing and all cost of material, labour, T&P etc in pangara & Attarra IH

12.50 mm thick Cement Plaster in C.M. 1:4 with cement and sand i/c all cost of labour, material, T&P etc. in pangara & Attarra IH

Supply and fixing 6mm china white glazed tiles in flooring or skirting or dado laid with ratio 1:3 cement and approved coarse sand finished with white cement slurry, jointing and polishing complete including supply of all material, labour, T&P etc for proper completion of work in pangara & Attarra IH

Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast, tierods, gratings etc. (When not included in over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors chaukhats nosing, hold fast for chaukhats of door/window in pangara & Attarra IH

Providing sal wood wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in poition with hold fast lugs or with dash fasteners of required dia & length in pangara & Attarra IH

Providing and fixing panelled or panelled and glazed 35 mm thick teak wood shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge in pangara & Attarra IH

Providing and fixing wire gauge 35 mm thick teak wood shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws in pangara & Attarra IH

Providing and fixing chromium plated 25 mm dia brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc. wherever necessary complete in pangara & Attarra IH

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete of size 300 mm×16 mm in Pangara and attarra IH

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete of size 150mm×10mm in Pangara and attarra IH

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete of size 125 mm in Pangara and attarra IH

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc, complete in pangara and attarra IH

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete in pangara and attara IH.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/wooden frames with rawl plugs screws etc. (10mm×10mm Square Bar) in pangara & Attarra IH

Providing and fixing fly proof stainless steel grade 304 wire gauge, to window and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete with teak wood beading 62 mm×19mm in pangara & Attarra IH

Providing & Laying Rubble moulded zig-zag interlocking concrete block pavments having thickness 80 mm as per drawings and technical specifications of MORD in pangara & Attarra IH

One priming coat and two coat oil distemper on new work including supply of all material, labour and T&P etc. Required for proper completion of work in Pangara and attarra IH.

Painting or varnishing new wood work are iron work with one coat of ready mixed priming paints and two coat of approved superior quality ready mixed paint or varnish including supply of all materials labour and T&P etc for proper completion of work in pangara & Attarra IH

Supply and laying one layer of Tar felt or any other equivelent approved material at the junction of wall or roof or at any place as per direction of engineer in charge including necessary overlap giving coat of approved mossaic paint below the tar felt and including supply of all material, labour and T&P etc. required for proper completion of work. in pangara & Attarra IH

E/W in filling within/around campus of IH including all lead, lift, cartage, loading, undloading with manual compaction and Dressing. in pangara & Attarra IH

Providing and fixing 32 mm dia nominal bore G.I pipes complete with G.I. fittings including trenching and refilling etc in pangara & Attarra IH

Providing and fixing gun metal gate valve 32 mm nominal bore with C.I. wheel of approved quality (screwed end) in pangara & Attarra IH

Constructing masonry Chamber 30×30×50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C.I. surface box 100×100×75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement :5 fine sand :10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick, finised with a floating coat of neat cement complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation in pangara & Attarra IH

H.P. or L.P. ball valve with polythene floats: 20mm dia. in pangara & Attarra IH

Providing and fixing 20 mm nominal dia Chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge in pangara & Attarra IH

Providing and fixing 32 mm nominal dia Chlorinated Polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. in pangara & Attarra IH

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank in pangara & Attarra IH

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not les than 690 gms, 15 mm nominal bore in pangara & Attarra IH

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931, 15 mm nominal bore in pangara & Attarra IH

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required, White Vitreous China Wash basin size 550mm×400mm with a 15 mm CP Brass single hole basin mixer in Pangara and Attara IH

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern including painting of fitting and brackets, cutting and making good the walls wherever require, White vitreous China Flat back wash basin size 450×300 mm with single 15 mm C.P brass pillar tap in Pangara and attarra IH

Providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required, Kitchen sink without drain board of size 610mm×510mm bowl depth 200mm. in pangara & Attarra IH

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete, 10 litre (full flush) capacity-coloured. in pangara & Attarra IH

Providing and fixing P.V.C waste pipe for Sink or wash basin including P.V.C waste fittings complete. Flexible pipe 32mm dia in pangara & Attarra IH

Providing and fixing miror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade wih 6mm thick hard board backing. Rectangular shape 453mm×357mm in pangara & Attarra IH

Providing and fixing white viteous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings in pangara & Attarra IH

Wiring points for light with 1.5 sq mm. FRLSH pvc insulated multi strand copper conducter cable in PVC conduit pipe partly concealed in wall partly laid in slabe along with reinforcement before concreting complete, with 14 SWG copper earth continuity wire, GP box, piano type switch and ceiling rose/angle/batten holder on 3mm thick phenolic paminated backelite sheet etc complete in all respect as directed including matching colour wash in pangara & Attarra IH

Supply and wiring of submains with 2 nos 2.5 sqmm & with 1 no earth wire of 1.5 sqmm FRLSH pvc insulated 1100 v grade single core multistrand copper conductor cable as earth continuity wire drawn inside conduit in 20 mm dia heavy duty (2mm thick) pvc conduit complete, including supply of all material, labour and T&P etc. required for proper completion of the work as directed by engineer in charge in pangara & Attarra IH

Supply and wiring of sub main 2 number 4 sqmm frlsh pvc insulated 1100 v grade multistranded single core copper conductor cable in heavy duty (2mm thick) 20 mm dia pvc conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm frlsh pvc insulated multistranded copper conductor cable as earth continuity wire etc. complete in all respect in pangara & Attarra IH

Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc. Complete in all respect. in pangara & Attarra IH

Supply and fixing hexagonal/round G.P. fan box of approved make made up of 1 mm thick ISI marked G.P. sheet spot welded four to eight holes of 25.4 mm for pipe entry of the box. Holes should be semi shuttered type with 0.5 mm G.P. sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted m.s. bar × 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the r.c.c. roof before concreting along with supply of all material, labour, T&P etc. required for proper completion of the work in pangara & Attarra IH

Supply and fixing of water tight oblong 10 watt LED Bulkhead luminaire having die cast housing with driver set confirming to IP 65 and above protection complete CAT AAA, 100 system lumens, PF>0.95, five year warranty in all respect in pangara & Attarra IH

Supply and fixing of category A surface/flush mounting 4 ways TPN distribution boards with additional metal door without mcb complete in all respects, as directed at site by engineer in charge in pangara & Attarra IH

Supply and fixing of 6 Amp to 32 Amp (10KA) SP MCB in existing MCB, DB complete with connection as required CAT A in pangara & Attarra IH

Supply and fixing and making connection of 40 Amp 4 pole MCB (10KA), CAT A complete in all respects as per direction and satisfaction of engineer in charge in pangara & Attarra IH

Supply and fixing of power plug with 15A/250V flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. Box of size 175mm×100mm×50mm size with penolic laminated backelite sheet cover 3mm thick fixed with brass machine scews and cup washer. in pangara & Attarra IH

Supply and fixing of two number 8 SWG G.I. wire in 15mm dia GI pipe for earthing laid in gound are in wall duly concealed including cast of cement, sand, labour, T&P other material required for proper completion of work as directed at site in pangara & Attarra IH

M/S VIVEK KUMAR SINGH

EKTA BUILDERS