REPAIR TO HARD STANDING APPROACH PATH ROAD SIGN BOARDS REPAINTING OF ROAD AND OTHER ROAD FURNTURE ITEMS WORKS IN THE UNITS OF JHAKRI MATIANA AND AVERIPATTI IN THE AREA OF AGE B R PRITHI MILITARY STATION UNDER GE 863 EWS

Amount

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15cm thickness ( below or above ground level) and including removal of old materials from site out of A 1 defence land complete all as specified and directed by Engineer-in-charge.

M & L for 100 mm PCC 1:2:4 type B-2 (using 40mm graded crushed stone agg) as in even and fair finished surface(without using extra cement) complete all as specified and directed. complete all as specified and as directed

M&L forming 12mm thick Expansion joints in 100mm th concrete slab and filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘ complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggrgate as in foundaton flling and mass complete all as specifed and as directed.

M&L for Providing cement concrete 75mm thick in PCC 1:4:8 Type D-2 using 40mm graded crushed stone aggregate over rammed earth as in sub base to receive floor finish etc complete all as specified and directed by Engineer-in-charge.

M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floor over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete. complete all as specified and as directed. .

M&L rubber moulded (coloured glossy finish) factory made with vibratory table method,precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 grade (ISI Marked ), set, jointed and pointed in neat cement slurry in floors with grey cement & pigments including and over 25 mm thick sand cushioning for laying of inter locking tiles (paving blocks) complete all as specified and directed (Note : Design/shade of rubber moulded machine presses precast concrete Paver block shall be as approved by GE/Engr-In-Charge.

M & L Providing Cement concrete Type B-1 1:2:4 ( 20 mm graded crushed stone aggregate) as in seismic and other similar bands, plinth courses, string courses, lacing courses, , copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F in repairs solar Delineator (1000X47mm) is made polycarbonate and toughened aluminium alloy body. height 145mm, diameter-80mm, comprises of 4 super bright LEDs which give 360degree viewing. solar panel- 2.5V, 120mm(approx.) 1.25 V rechargeble battery-1 No each in full perimeter all as per MORTH and IRC specification including necessary excavation and earth work, embedding the post in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate, PCC block size 30x30x45cm, complete all as specified and directed.

M&L for Road Safety convex mirrior made up of polycarbonate reflective and body made of ABS/Fibre/ Plastic of size 1000 mm dia including MS pipe 40 mm dia 2.4 M length duly powder coated embedded in PCC 1:2:4 of size 45cmX45CmX45 including necesary earthwork in excavation complete all as specified and directed by Engineer-in-charge. Make -gogyia Plastic Cat Part No. RSCM-100 or equivalent in TATA /3 M

S&F in repairs Road Studs/Cat eye the body of stud is made of ABS material two reflectors are fitted in the body. The road stud is dynamically designed so that it can bear load upto 25 Tons and its impact strength is about 230 KN weight of stud is 130 gms. Body colour Yellow with swareflex beads of size 100mm X 19mm. fixed on roads by nail at intervals completed as per manufactures instructions etc. complete all as specified and directed by Engineer-in-charge.

S&F in repair Solar Cat Eye Aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 80mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed by Engineer-in-charge.

M&L for preparation of road surfaces and applying thermoplastic reflective paint for marking of minimum 2.5mm thick single coat as in centre line and edge line, zebra crossing, stop lines etc., road marking of 150/100mm width using 'HOT MARK' thermoplastic paint (Hot application) white or yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads, titanium dioxide, calcium carbonate, inter fillers etc, thermoplastic requirement for glass beads shall be conforming to BS- 6086 of MORTH specification including spraying of glass beads @ 300 Gms/Sqm etc all as per manufacturer's instructions and as directed. Notes:- Thermoplastic Road marking Materials shall have the higest quality of raw materialts to provide long life and excellent visibility even after extended use and comply with MOST 803.4.2( MoRTH 803), BS 3262:1989,BS EN 1871:2000, AASTHO M249,AS 1742.2,SLS 1384:2009 specification.