SPECIAL REPAIRS TO OTM ACCN BLDG NO P-3 OF 42 MED REGT (DBN) AND CERTAIN MINOR WORK AT PATIALA MIL STN

Amount

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for cement plastering 15mm thick in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge.

Material & labour for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material & labour for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

Complete removal of existing treatment of any type/description from ceilings/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

Applying wall care putty in walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc (for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior/internal painting complete all as specified and directed.

Material & labour for Applying two coats of oil bound distemper white or tinted over a coat of primer on walls & incl preparation of plastered surfaces of wall complete all as specified and directed.

Material & labour for Preparation of old plastered surfaces of walls and applying two coats of cement base paint , complete all as specified and directed.

Material & labour for preparation of plastered surfaces of wall/ ceiling and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Material & labour for preparation of old steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified

Material & labour for Preparation of old wood surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified

Material & labour for Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified.

Material & labour for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 all as specified.

Material & labour for Providing Precast Cement concrete louvres and Jallies, 35 mm thick (measured solid) including all mouldings Type B0, 1:2:4 using 12.5 mm graded crushed stone aggregates and set in Cement Mortar 1:4 complete all as specified and directed by the Engineer-in-charge.

Demolition of cement concrete un -reinforced in ground floors and pavings complete all as specified and directed.

Material & labour for machine cut Kota stone slab flooring 20-25 mm thick laid over 15 mm thick cement mortar 1:3 screed bed laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing to mirror finish complete to be fixed in any position complete all as specified and directed.

Material & labour Glazed ceramic coloured tiles (200x100 mm)x 7mm thick matching to the shade of kota stone (light grey colour) on vertical surface such as skirting,dado etc. over and including 10mm thick rendering in CM 1:4 thick set and jointed in neat cement mortar and pointed in colour cement to match tiles complete all as specified and directed by Engineer-in-charge.

Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises

Material & labour for Non - skid coloured Ceramic tiles 400 x 400mm thick (square/ rectangular) area of Each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and incl 15 mm thick cement mortar (1:4) screed bed and pointed in white or coloured cement to match the tiles complete all as specified and directed by Engineer-in-Charge.

Material & labour for Glazed ceramic coloured printed/digital tiles of size450x300mm (square/ rectangular) area of Each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surface such as skirting , dado etc. over and including 10 mm thick rendering in cement mortar 1:4 thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles complete all as specified and directed by Engineer-in-Charge.

Material & labour for Non - skid Ceramic tiles 7 to 8 mm thick polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc over and including 15 mm thick rendering in cement mortar 1:4. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed by Engineer-in-Charge.

Supply & fixing stainless Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc for curtain rod incl all fixing complete all as specified and directed by Engineer-in-Charge.

Taking down chokhats or frames (without taking off shutters from the frame) n.exc 1.50 sqm including cutting holes and making good reqd shape for hold fast block for new frame complete all as specified directed.

Supply & fixing for Solid PVC door frame (Single Rebated) of size 75mm x 50mm made out of solid PVC foam with homogeneous fine cellular structure having density of 750 KG/Cum smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified complete all as specified and directed. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life), Complete all as specified

Supply & fixing factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:),( brown/ coffe colour) with homogeneous fine cellular structure having density of 550 KG/Cum with 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 2mm thick Plain colour PVC sheet on back face, and in frame at site complete all as specified and directed.

Supply & fixing Butt hinges 100 mm size, mild steel butt hinge pin, bright polished and fixed, typeB-12 complete all as specified and directed.

Supply & Fixing Aluminium handles125mm, cast type, anodised complete all as specified and directed.

Supply & fixing Aluminium anodised, barrel tower bolts of 200 mm size of extruded section and fixed complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Supply & fixing factory made Powder coated Pressed steel door frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,size 125x60mm with a shop coat of primer in and including filling of PCC 1:3:6 type C-0 (using 12.50 mm graded aggregate) in chowkhats and PCC 1:2:4 type B1 as in hold fasts blocks including necessary form work complete all as specified and directed.

Supply & fixing factory made flush door shutters 30mm thick, 7 Ply, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply & Fixing 30mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Pt-1 section 8 clause 8.24(a) supplied and fitted to chowkhats complete all as specified and directed.

Supply & Fixing Butt hinges 100 mm size, mild steel butt hinge pin, bright polished and fixed, typeB-12 complete all as specified and directed.

Supply & Fixing Aluminium handles125mm, cast type, anodised complete all as specified and directed.

Supply & Fixing Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and directed

Supply & Fixing Aluminium anodised, barrel tower bolts of 200 mm size of extruded section and fixed complete all as specified and directed.

Supply & fixing 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including necessary welding to chowklhats complete fixed all as specified

Floor door stopper of size 140 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and directed.

Supply & fixing Steel window box type usning ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs, etc including 8mm square gaurd bars all as shown on drawing No TD-191 (R) sheet 1/4 to 4/4complete all as specified and directed by Engr-in-charge . (Note: Sheet can be seen in the office of AGE B/R).

Supply & fixing for 3mm thicck Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane

Supply & fixing for 3 mm figured glass sheet ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.

Supply & fixing for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Material & labour for Power coated (Minimum thickness of power coating 50 micron) Anodised aluminium frame, shutters for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge.

Supply & fixing 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on wall to make PVC frame as per specification complete all as specified and directed by Engr-in-Charge.

Supply & fixing Solid PVC wall lininig consisting of 5 mm thick wood grain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and directed by Engr-in-Charge.

M&L Providing false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm incl both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 1200 mm and secondary intermediate cross - T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried uot as per specifications, drawing and as per directions of the Engineer-in-Charge. With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles complete all as specified and directed by Engineer-in-Charge..

Supply & fixing vitreous china premium/1st quality wash basin white/ivory/off white, flat back, size 500x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete in all respect as per manufacturer's instructions and taking down existing of any description/size complete all as specified and directed by Engr-in-Charge.

Supply & fixing vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors except G.F.and taking down existing of any description/size c complete all as specified and directed by Engr-in-Charge.

Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Supply & fixing vitreous china premium/1st quality Orissa Pan water closet white colour of size 580X440mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and including and taking down existing of any description/size complete in all respect all as specified.

Supply and fixing 100 mm Cast iron Traps ‘P’ or ‘S’ , 600mm long, complete all as specified and directed.

Supply & fixing flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

Supply & fixing Vitreous China Urinal, full stall type, white (with flush pipe and waste pipe) including Brass chromium plated inlet and outlet screwed for pipe or connections with CP Spreader including necessary packing, union etc and fixed complete all as specified and directed by Engr-in-Charge.

Supply & fixing vitreous china urinal partition white of size 310x700 mm incl all necessary fittings complate all as specified and directed.

Taking up or down existing steel tubing and connections, 15mm or 20 mm bore complete all as specified.

Supply & fixing 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc including taking down existing pipe complete all as specified.

Supply & fixing 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc including taking down existing pipe complete all as specified.

Supply & fixing overhead shower 125mm size with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified.

Supply & fixing towel rail 20mm dia,D type, 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified.

Supply & fixing Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

Supply & fixing Pillar taps, fency type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed in repairs complete all as specified and directed by Engr-in-Charge.

Supply & fixing Stop valves, fancy type, CP with long shank and cup ( concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect complete all as specified and directed by Engr-in-Charge.

Supply & fixing Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect complete all as specified and directed by Engr-in-Charge.

S&F acrylic glass shelf assembly for soap dish and appropriate space for placing other things like tooth brushes comb tooth paste etc and fixed to walls with plug and brass chromium plated screws complete all as specified and directed by Engr-in-Charge.

Supply & fixing doubled layered rotational moulded polyethylene white water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank complete all as specified and directed by Engr-in-Charge.

Supply & fixing 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified and directed by Engr-in-Charge.

Supply & fixing PVC connections 15mm size with brass nuts of length 450mm complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe, 100mm bore, sand cast in any length, with or without ears, with cement joints,fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified after taking down of existing unserviceable pipe fixed in repair complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe, 100mm bore, sand cast in any length, with or without ears, with cement joints,laid in trenches or in floors complete all as specified after taking down of existing unserviceable pipe fixed in repair complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe, 75mm bore, sand cast in any length, with or without ears, with cement joints,laid in trenches or in floors complete all as specified after taking down of existing unserviceable pipe fixed in repair complete all as specified and directed.

Supply & fixing for cast iron branch pieces single Centrifugal type (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, suitable for 100 mm bore pipe, fitted with oval access door jointed with lead joint, complete all as specified.

Supply & fixing for CI Cowl Centrifugal type suitable for 100 mm bore pipe as in repair, complete all as specified.

Supply & fixing for Cast iron bends/Tee duck foot or heel rest, radius for 75 mm bore pipe, complete all as specified and directed.

Supply & fixing for Cast iron bends/Tee duck foot or heel rest, radius for 100 mm bore pipe, complete all as specified and directed.

Supply & fixing for PVC(HDPE) rain water pipes, 110 mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts washing, nuts etc including taking down existing damaged CI rain water pipe complete all as specified and as directed

Supply & fixing PVC (SWR) bends/tees of any radius for 110mm bore as in repair complete all as specified.

Supply & fixing Salt-glazed stoneware gully traps,Centrifugal type 150x150mm size, square or round mouthed, fixed in repair complete all as specified and directed by Engr-in-Charge.

Supply & fixing Cast iron multifloor trap 110 mm dia and 600 mm long including jointing with solvent cement in repair complete all as specified and directed by Engineer-in-Charge.

Material & labour 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate in sub base,complete all as specified and directed by Engineer-in-Charge.

Material & labour for Machine pressed precast concrete interlocking paver block with Grey Cement and no pigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laid over base complete all as specified and directed by Engineer-in-Charge.

Material & labour sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-charge.

Material & labour for Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in plinth protection/ floor finish, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints complete all as specified and directed by Engineer-in-Charge.

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed by Engineer-in-Charge.

Demolition of mud phuska on roof any thickness complete all as specified and directed by Engineer-in-Charge.

Material & labour for Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, dirt etc. complete all as specified and directed by Engineer-in-Charge.

Material & labour for Cutting grooves in brick wall, 50mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed by Engineer-in-Charge.

Material & labour for PCC 1:3:6, type B-0 using 12.5mm graded stone agg as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100 complete all as specified and directed by Engineer-in-Charge.

Material & labour for Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified, The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only complete all as specified and directed by Engineer-in-Charge.

Material & labour for 20- 22 mm Precast PCC plain factory made tiles, ISI marked, 22 mm thick, of size 250 mm x 250 mm, machine pressed and cut polished and set jointed and pointed in neat cement slurry and fabricated using grey cement & no pigments. over and including 15 mm thick cement mortar (1:3) bedding and joints grouted flush in cement mortar (1:3) complete all as specified and directed by Engineer-in-Charge.

Material & labour for PCC 1:2:4, type B-0 using 12.5mm graded stone agg as in roof curve, benching, mud stops, steps, coping and the like items slightly rounded or chamfered on the edges complete all as specified and directed by Engineer-in-Charge.

M & L for frosted glass 3.0mm thick ordinary quality and glazing with oil putty to steel window and with wooden beads to wooden shutters in square not exc 0.5 sqm in each pane complete all as specified and as directed by the Engineer-in-Charge. (Note : The rate quoted to include fixing of glass panes upto 3rd floor including taking down)

M & L PCC 1:3:6 type C-2 using 40mm graded stone aggretgate, as in base for PVC tanks, as in base of floors and other similar works complete all as specified and directed.

Material & Labour Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM (1:4) in cover slabs for manholes etc.duly embossed MES MONTH & YEAR of casting including necessary formwork all as directed by Engr-in-charge.

Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K or approved equivalent, having 100% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturer specifications.

Taking down carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc removing materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of credit and making good the disturbed portion of all floor, ceiling ,walls etc all as specified and directed.

M & L for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor for one light/fan/bell point in and including NEW PVC rigid non metallic concealed conduit 19/20 mm dia, medium duty, ISI Marked to be terminated in pressed steel terminal boxes with PVC modular top cover plates of suitable size for mounting of modular type switches/sockets/regulators including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including cutting chases and making good the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed by Engr-in-charge. Notes: (i) Cost of Pressed steel Terminal Boxes and modular Top cover plate shall be included in point wiring. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth.(iii) -Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item.

All as per Sl item No 100.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed.

All as per Sl item No 100.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed.

All as per item No. 100.00 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 1.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board.

S & F Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified.

S & F Modular switch 1 way, 16 Amps, 1 module, 230 volts complete all as specified.

S & F Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified.

S & F Modular socket 5 pin 6 &16 Amps, combination type 2 module complete all as specified.

S & F Modular Fan regulator step type, 120 watts, 2 module complete fixed as in repair all as specified.

S&F ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed

S&F Lamp holder including LED bulb 12 W all as specified & directed by Engr-in-charge.

S&F New generation energy saving and environmental friendly long life LED building security light 1x35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket made with 32mm bore light grade GI pipe bend to shape, including MS clamp of size 40mmX3mm F.I and provision of PVC cable 1.5 Sqmm twin core from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge.

S&F Sub main wiring (with approved colour coding as per IS) with two run of single core FRLSH PVC insulated flexible multistranded copper conductor 1.1 KV grade (main cable : number of runs indicated below) along with one run of single core FRLSH PVC insulated flexible multistranded copper conductor 1.1 KV grade for earthing in and including PVC conduits of suitable size, for 2 runs of 6 sq. mm main cable + 1 run of 6 Sq. mm earth cable as in replacement of old unserviceable wiring complete all as specified and directed. Note: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Cutting chasing shall be included in this item. (iv) Cost of PVC conduit of suitable size is included in the unit rate quoted by contractor

S&F Sub main wiring (with approved colour coding as per IS) with two run of single core FRLSH PVC insulated flexible multistranded copper conductor 1.1 KV grade (main cable : number of runs indicated below) along with one run of single core FRLSH PVC insulated flexible multistranded copper conductor 1.1 KV grade for earthing in and including New PVC conduits of suitable size , for 2 runs of 4 sq. mm main cable + 1 run of 4.0 Sq. mm earth cable as in replacement of old unserviceable wiring complete all as specified and directed. Note: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Cutting chasing shall be included in this item. (iv) Cost of PVC conduit of suitable size is included in the unit rate quoted by contractor

S&F MCCB, 4 pole 125 Amps, 415 volts, 16 Ka complete fixed as in repair all as specified and directed. (Note: MCCB should be B or C curve as directed by engineer in charge)

Supply and fix in replacement of epoxy power coated MCCB distribution box double door VTPN 4 way vertical type AC 415 V with IP 43 protection for MCBs alongwith provision of MCCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified by Engineer-in-charge. (Note :- MCCB will be measured and paid under seperate item) (i) Cost of Eye/bottle thimbles used for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (ii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (iii) connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size.

S&F Sheet metal enclosure 8 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP43 protection complete all as specified & directed by Engr-in-charge.

S&F Sheet metal enclosure 4 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP43 protection complete all as specified & directed by Engr-in-charge.

S&F MCB , SPN C series, 240 Volts ,32-40 amp for fixing in DBs of including proper thimble connections complete all as specified and directed by Engineer-in-Charge.

S&F MCB, single pole B series 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge.

M & L for Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification at page 497 complete all as specified and directed by Engineer-in-Charge.

Supply and fix Tube light fitting Self Ballasted LED Delight Neo Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge.

Supply and fix Recess mounted LED luminaire 36 watt suitable for grid ceiling cutout dimensions: 2x2 Ft. incl connecting with twin core copper wire from ceiling rose to fitting, Fixture size: (LxWxH) in (595x595x65) mm incl lamp and driver all as specified & directed.

Supply and fix XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core supplied & laid in replacement complete all as specified& directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm above with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.

Supplying & laying factory made unreinforced Precast concrete cable covers class LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables complete all as directed by Engr-in-Charge

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed. Cost of wall cutting/chasing and repair to existing surface is included in the unit rate quoted by contractor.

Taking down and refixing of ceiling fan after necessary cleaning, painting and replacement of capacitor and capacitor stand making serial No complete all as specified and directed by Enginner-in-charge. Note:- Cost of supply & fixing of celing fan box round cover plate is included in the unit rate quoted by contractor.

Taking Down Solar Water Heating System including 4 Nos solar Plates, 1 Nos Solar Tank ( 200 Ltr) ,1 Nos PVC Tank, angle iron stands, Connected copper pipes, GI Pipes, PVC hose pipes, nuts bolts, washers, GI Nipple, union socket, flanges and screws at building No P-01 (42 med regt) and all connected parts and depositing safely to AGE E/M Store yard.

Reassembling, refixing to hot water storage tank of solar water heater of 200 Ltr litre capacity made of stainless steel (IA SI-304) 1.6 mm thick and testing of Solar Water Heating System ( 4 Nos solar Plates, 1 Nos Solar Tank ( 200 Ltr) ,1 Nos PVC Tank) including replacement of unserviceable parts ( PVC Hose Pipes, GI Nipple, nuts bolts, washers, union socket, flanges and screws), Copper Pipe, GI Pipe including all fittings such as elbows union sockets etc at Building No P-03 wherever required at the discretion of the Engr-in- Charge shall be carried out by the contractor for efficient functioning of Solar Water heating System.

S & F Ceiling fan 1200mm sweep energy efficent suspended from fan hook including connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 Sqmm copper conductor from ceiling rose to ceiling fan complete all as specified & directed.Note:-cost of anchor bolt for hanging of ceiling fan and grouting is deemed to be included in the unit rate quoted by contractor.

S & F Exhaust fan motor 380/450 mm sweep as per existing complete all directed by Engr-in-charge. (Note: Cost of Louvers as per existing size including taking down and refixing of exhaust fan 380/450 mm sweep is deemed to be included in unit rate quoted by contractor)

M & L for Sub main wiring with two single core 1.50 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through New PVC concealed conduit of suitable dia including 1.50 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 1.50 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 1.50 Sqmm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this items shall be inclusive of the cost of (i) Cost of Rigid non-metallic PVC conduit of suitable dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc is included in the unit rate quoted by contractor. (ii) Cost of Cutting chases, pinning in making good to facing and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth is included in the unit rate quoted by contractor. (iii) Cost of PVC conduit of suitable dia is included in the unit rate quoted by contractor.

Supply and fix metal flush box of 3 module complete all as specified and directed.

Supply and fix modular cover plate of 3 module complete all as specified and directed.

S&F industrial portable cooler heavy duty 750 watt copper winded motor, airflow 10000 CFM, Cools upto 1500 Sqft area with three speed, Heavy duty castor wheels, 4 inch thick cooling pad, 30 inch fan with 4 blades, High efficiency Honey comb cooling pad, float valve to regulate water supply, Steel mesh on back and front for safety, Dimension (1120 x 680 x1700 mm) , noise level less than 68 db with water tank of capacity 160 Litre made of superior engineering plastic having water consumption 15-20 Litre/Hour including dust filters complete all as specified & directed Model (Wk-180K) Evapoler /BAJAJ KENSTAR/CROMPTON.

Supply and fix Electric Water heater (Geyser) storage type of capacity 50 ltr BEE 5 star rated, ABS body, metal tank with glass lined coating multiple heating option, shock safe plug puf insulation, incoly glass coated anode rod/copper heating element with ISI mark, adjustable knob for temp setting with minimum & high working pressure, multi functinoal saftey value, & whirl/swril flow technology, themostat electronic type, complete including superior quality PVC connection pipe heavy duty 15 mm dia 450 mm long, brass adopter for water connection with nickel coated ISI marked with fastener, nut bolt, washers duly grouted, giving shape to hole as suitable and plastering including making good of disturbed surface as per exisiting surface connection to inlet and outlet valves, testing complete all as specified and directed by Engineer-in-Charge

S & laying GI tubing 'medium grade' 15 mm bore with all necessary fittings like elbow, reducer, T-joint, nipple and passing through brick walls, ceilling or laying in floors, tapping from existing lines and necessary cutting, chasing of walls etc complete all as specefied and directed.

Supply and fix Stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of bore 15 mm Chromium plated fancy type complete all as specified and directed.

Supply and fix Bib tap cast copper alloy chromium plated, fancy type, with capstain head handle screwed down screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and directed by Engr-in-charge.

M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through New PVC concealed conduit 25 mm dia including 4.0 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 4.00 Sqmm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Cost of PVC conduit of suitable dia is included in the unit rate quoted by contractor.

Supply and fix SPN earth metal plug 240 volts with 20 amp SP MCB with a two pin and earth plug and socket for geysers complete all as specified and directed.

ANIL KUMAR AND CO (BID ID -3104189)

SWAMI ENGINEERS (BID ID -3105224)

m/s panchmukhi builders (BID ID -3103474)

Buttar Construction Co. (BID ID -3101450)

M/S Mukesh Kumar Gupta (BID ID -3104270)

Arneja Builders (BID ID -3097090)