Periodical Renewal work of 5 year Post DLP PMGSY Road A RD Road to Pendili B RD Road to Mantrajhola C RD Road to Jamulima D PWD Road to Jangidi in the district of Rayagada for the year 2025-26

Clearing and grubbing road land including uprooting wild vegetations, grass, bushes, shurbs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used etc. complete including cost. , conveyance, royalty, Cess & taxes of all materials & cost of all labour & T&P required for the work etc complete as per specification & direction of Engineer-in Charge. 1) PS Road to Pendili (OR-27-167)

2) RD road to Mantrajhola (OR-27-240)

3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Clearing the existing black topped surface with removal of foreign materials with brooms or soft brushed and finally dusting with old gunny bags and /or compressed air to receive bituminous including all labour,T & P, cess articles required for the work etc complete as per direction of Engineer-in-charge. 3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material with in all lifts and lead upto 1000 Meters including all labour T&P,Cess, articles required for the work etc complete as per direction of Engineer-in-charge. 3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam IRC Grade-III (53mm to 22.4mm) specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 404 of MoRD by manual means including all labour, T&P and cost, conveyance, royality, DMF (10% over Royality), EMF (5% over Royality), Addl Charges, Cess & taxes of all materials required for the work complete in all respect as per direction of the Engineer-in-Charge. 1) PS Road to Pendili (OR-27-167)

2) RD road to Mantrajhola (OR-27-240)

3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Providing & applying the primer coat with Bitumen Emulsion (SS-1) on prepared Surface of Granular base including cleaning of road Surface & spraying primer at the rate of 0.60kg/sqm using mechanical means as per technical specification Clause-502 of MoRD & as per direction of Engineer-in-Charge. 1) PS Road to Pendili (OR-27-167)

2) RD road to Mantrajhola (OR-27-240)

3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Providing & applying tack coat with Bitumen Emulsion (RS-1) using emulsion distributor @ 2 Kg per 10 Sqm on the bituminous surface and cleaned with mechnial broom as per technical specification Clause 503 of MoRD & as per direction of Engineer-in-Charge. 1) PS Road to Pendili (OR-27-167)

2) RD road to Mantrajhola (OR-27-240)

3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of speficied grading premixed with bituminous binder of 60/70 penetration grade of bitumen , transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheelede, vibratory and tandem rollers to achieve the desired compaction as per clause 508 of MoSRT&H specification for Road & Bridge works and all other T&P articles including cost, conveyance, royality, DMF (10% over Royality), EMF (5% over Royality), Addl Charges, Cess, taxes of chips and bitumen & other required materials etc. complete as per specification and direction of the Engineer in charge. 1) PS Road to Pendili (OR-27-167)

2) RD road to Mantrajhola (OR-27-240)

3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Finishing Wall with Water Proofing Cement paint Two coat over a coat of cement wash of approved shade on new work including all cost of cement paint etc, as per drawing and technical specification and direction of Engineer in charge. 1) PS Road to Pendili (OR-27-167)

2) RD road to Mantrajhola (OR-27-240)

3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Supplying and fixing of measurement stones of R.C.C. M-15 grade including painting, lettering in accordance with the specifications and as approved by the engineer and as per direction of Engineer-In-Charge and as per clause 1703 of MoRD. 1) KM Stone 2) RD road to Mantrajhola (OR-27-240)

3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

1) 200 mtr Stone 2) RD road to Mantrajhola (OR-27-240)

3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Providing and fixing 15 cm dia and 1 m long guard post of RCC (1:2:4) including cost, conveyance royality, Cess, taxes of all materials, labour, T&P required for the work etc. complete as per specification and direction of the Engineer in charge. 3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Providing and erecting direction and place identifications of semi reflective sign boards of size upto 0.90 Sqm. as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and MORD technical Specification Clause 300,800,1700 as per direction of the Engineer in charge (Inter mediate Board)ng Clause 1701 and Annexure 1700.00 2) RD road to Mantrajhola (OR-27-240)

Providing and fixing of semi reflective cautionary mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing as per Clause 1701.2.2 of MoRD and as per direction of Engineer-In-charge 600 mm equiaterial triangle 2) RD road to Mantrajhola (OR-27-240)

3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H specifications for Road and Bridge works (4th Revision) with cost of all labour, T&P and with cess, royality and as per direction of Engineer-in-charge. (Payment of earthwork will be made compacted level section) only 1) PS Road to Pendili (OR-27-167)

2) RD road to Mantrajhola (OR-27-240)

3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Providing and laying surface dressing as wearing course in single coat using crushed stone aggregates of specified size on a layer of bituminous binder of 60/70 penetration grade of bitumen laid onprepared surface and rolling with 8-10 tonne smooth wheeled steel roller as per Clause 510 of MoSRT&H Specifications 1) PS Road to Pendili (OR-27-167)

2) RD road to Mantrajhola (OR-27-240)

3) RD road to Jamulima (Or-27-282)

Earth work in excavation of foundation in hard or gravelly soil with all leads & lifts including dressing the sides & leveling the bed of the foundation to the required width & required depth including shoring shuttering, propping bullah, pilling, dewatering from foundation supplying & working of pumps including hire & running charges of pumps & all machineries required for the work & providing coffer dam if required & stacking the excavated materials away from the working areas with Cess complete as per specification & direction of the Engineer-in-charge. 3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, additional charges, DMF 10% & EMF 5% over royalty Cess & taxes of all materials & cost of all labour & T&P required for the work etc complete as per specification & direction of Engineer-in Charge. 3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Providing Plain Cement concrete M-15 in foundation upto a required depth below ground level and upto a required height above ground level/bed level using 40mm down graded hard granite aggregates of approved quality from approved quarry including hoisting, lowering, laying compacting in position in layers to proper slope & level including watering, curing and cost, conveyance, Cess, royality, additional charges, DMF 10% & EMF 5% over royalty taxes of all materials etc. with all labour and T&P required for the work including dewatering, shuttering if necessary complete as per direction of Engineer in charge In Foundation 3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

In substructure 3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Providing weep hole in plan / Reinforced concrete abutment/ wing wall / retaining wall with 100mm dia A.C. Pipe, extending through the full width of the structure with slope of 1V : 20 H towards drawing face complete with Cess etc. as per drawing and technical specification and direction of Engineer in charge. 3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause Annexure 300,800,1700 of MORD as per direction of the Engineer in charge 1) PS Road to Pendili (OR-27-167)

2) RD road to Mantrajhola (OR-27-240)

3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Road marking with hot Applied thermoplastic compound with Reflectorising Glass beads on bituminous surface providing and applying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @250 gms per Sqm area,thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35.The finished surface to be leveled,uniform and free from streakers and holes 3) RD road to Jamulima (Or-27-282)

4) PWD road to Jangidi (OR-27-254)

Please Enable Macros to View BoQ information