Certain repair to flooring, wall, chajja, facia, plumbing and sanitary fittings, joinery and rolling shutters work under the AOR of AGE SLDC under AGE (I) (U) B/R, Delhi Cantt-10

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n. Exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (incl backing), removing tiles and rubbish off the premises (out of Defence land) complete all as specified and directed by Engineer-in-Charge.

M&L for 75 mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge.

M&L for 18 -20 mm thick polished kota stone, machin cut kota stone slab flooring over 20mm cement screed bed in CM (1:6), and jointed in neat cement slurry mixed with pigment to match the shade of slab complete all as specified and directed by Engineer-in-Charge.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic coloured tiles (450x300x7mm) thick on vertical surfaces such as in skirting wall, and dado set and joint in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in cement mortar (1:4) rough to receive tiles complete all as specified and directed by Engineer-in-Charge.

M&L for vitrified ceramic light coloured tiles 10 mm thick (square/rectangular) area of each tile n.exceeding 0.36 Sqm in floors etc set and joined in neat cement slurry and pointed in white or colour cement to match colour tiles including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

S&F for vitrified ceramic tile 8 to10 mm thick light shade (square / rectangular) polished, area of each tile not exceeding 0.36 sqm over 10 mm thick plaster in Cement Mortar 1:4 as in vertical surface like skirting dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engineer-in-Charge.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed by Engineer-in-Charge.

Dismantling of brick work built in cement mortar including all quions arches , pillar etc but excluding ashalar facing dressed stone and pre-cast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for brickwork with sub class 'B' bricks, old size straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

S&F in repair aluminum extruded section door closer hydraulically requalated designation No. 3 universal type, sutiable for door shutters of 851 to 1000 mm in width and of weight not more than 35 Kg and fixed complete all as specified and directed by Engineer-in-Charge.

Dismantling of cast iron /PVC pipes 75/100mm dia complete all as specified and directed by Engineer-in-Charge.

S&F of PVC (SWR) pipe 110 mm dia single socketed with rubber ring joints laid in trenches or in floor including necessary excavation complete all as specified and directed by Engineer-in-Charge.

S&F of PVC (SWR) pipe 110 mm dia single socketed with rubber ring joints fixed to wall complete all as specified and directed by Engineer-in-Charge.

S&F of PVC (SWR) pipe 110 mm dia bends complete all as specified and directed by Engineer-in-Charge.

S&F of PVC (SWR) pipe 75 mm dia single socketed with rubber ring joints laid in trenches or in floor complete all as specified and directed by Engineer-in-Charge.

S&F of PVC (SWR) pipe 75mm dia single socketed with rubber ring joints fixed to wall complete all as specified and directed by Engineer-in-Charge.

S&F of PVC (SWR) pipe 75 mm dia bends complete all as specified and directed by Engineer-in-Charge.

S&F in repair 32mm dia Waste fittings, brass, chromium plated for basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density complete all as specified and directed by Engineer-in-Charge.

S&F in repair vitreous china wash basin,white flat back, size 580x450mm excluding taps, but including 32mm dia waste pipe/waste coupling of PTMT incl brackets etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of water tank exc 500 & n exc 1000 ltr and removing from site complete all as specified and directed by Engineer-in-Charge.

S&F of rotational moulded polythene water storage tank triple layers (Cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity any description,complete all as specified in SSR Part I and directed by Engineer-in-Charge

Dismantling of water tank exc 250 & n exc 500 ltr and removing from site complete all as specified and directed by Engineer-in-Charge.

S&F of rotational moulded polythene water storage tank triple layers (Cylindrical vertical with closed top) hoisted and fixed in position of 500 ltrs capacity any description,complete all as specified in SSR Part I and directed by Engineer-in-Charge.

S&F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in repair ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm bore bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule,complete all as specified and directed by Engineer-in-Charge.

S&F as in repair CP toilet paper holder with flat recessed type stainless steel fixed to walls complete all as specified and directed by Engineer-in-Charge.

S&F in repair pillar tap, 15 mm dia copper chromium plated fancy type screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm stop valve fancy type chromium plated cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.

S&F of soap dish, any type, fixed to plug with chromium plated brass screws in the wall with glass shelf assembly complete all as specified and directed by Engineer-in-Charge.

S&F as in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed by Engineer-in-Charge.

S&F as in repair for PVC connection 600mm long superior quality with PTMT nut on both side complete all as specified and directed by Engineer-in-Charge.

S&F in repair waste coupling CP suitable for 32 /40 mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair extruded aluminium alloy handles 150mm long fabricated type anodised for flush doors or skeleton doors or panelled doors complete all as specified and directed by Engineer-in-Charge.

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device (suitable for EWC) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm dia bib tap PTMT with long body any colour , screwed down high pressure screwed for iron pipe or for brass ferrule (Minimum weight 15mm - 120 gms) complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15mm bore stop cock concealed long shank chromium plated fancy type screwed down high pressure with crutch or butterfly handle complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15mm CP WHB mixer of long neck for mixing hot & cold water screwed down for iron pipe and and fixed complete all as specified and directed by Engineer-in-Charge.

S&F of CP grating 100/125mm dia/hinged/ circular of approved make and fixing with cement mortar 1:3 as in repair complete all as specified and directed by Engineer-in-Charge.

S&F of syphonic action rod with float valve (complete kit) for Low level cistern fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F for 4.80mm thick sheet glass/tinted/frosted ordinary quality in square exc 0.50 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including seat cover and CP hinging device (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

S&F in repair towel ring of chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed by Engineer-in-Charge.

S&F in repair chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.

S&F in repair chromium plated Jet for EWC including PVC connection and accessories complete all as specified and directed by Engineer-in-Charge.

S&F in repair towel rail 600mm long of chromium plated brass screw and wooden / plastic cleats complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, including taking down roots of trees complete etc. complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10 mm thick on brick or concrete surfaces in CM 1:6, finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly untreated plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer with alkali resistant priming paint complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of weather proof exterior emulsion paint over priming coat of exterior primer on new or untreated plastered surfaces using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceilling surface, finish even and smooth w / o using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces on ceiling and applying three coats white wash complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall/celling board/ Aluminium Partition any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

S&F of Gl frame work for ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hanger 4mm dia (upto 1200mm lenth)made out of GI flat 40x3mm size of 60cm long with expansion hold fastener 12.5mm dia 40mm long complete all as specified and directed by Engineer-in-Charge.

M&L for HSPC non asbestos fibre cement building boards 4mm thick, preprimed, self embossed fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed by Engineer-in-Charge.

M&L for PVC hollow wall panelling 5mm thick multy grain finish prelaminated inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site complete all as specified and directed by Engineer-in-Charge.

S&F of solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engineer-in-Charge.

S&F of 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed by Engineer-in-Charge.

S&F in repair Venetian Blinds of superior quality fabric (as approved by the AGE (I)), horizontal/vertical type, with 100mm wide louvers, including supplying and fixing of all arrangements required for proper functioning of the blinds such as aluminium top & bottom guide rails, rollers, chain etc. complete all as specified and directed by Engineer-in-Charge.

Dismantling Plain or corrugated steel sheeting/AC/ Fibre reinforced, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.

S&F of framed work such as grills, grating, steel ladder, iron gate and doors framed and hung as gates including pintle hinges, stops, hand made sliding bolt, handles, ornametal and intricate design etc complete all as specified and directed by Engineer-in-Charge.

S&F of pre-painted galvalume aluminium sheet zinc coatin GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F of pre-painted galvalume aluminium sheet zinc coatin GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15mm GI tubing medium grade galvanised steel tubing with all fittings fixed to wall and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F in repair 20mm GI tubing medium grade galvanised steel tubing with all fittings fixed to wall and ceiling or laid in floors complete all as specified and directed by Engineer-in-Charge.

P.H. CONSTRUCTION CO. (BID ID -3487092)

M/S SIMRAN CONSTRUCTION CO (BID ID -3486812)