REPLACEMENT OF ROOF SHEET AND CONNECTED B/R WORKS AT BLDG NO T-100 AND T-101 AT AF STATION GWALIOR

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each including iron mongeries complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but not exc 4.0 Sqm each including iron mongeries complete all as spd and directed.

S&F factory made UPVC white colour three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50 m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of UPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. complete all as spd & directed.

S&F 6 mm thick sheet glass as in windows, hinged doors, partitions, automatic doors, etc and similar work including cutting to shape, drilling holes required complete all as spd and directed.

M&L for dismantling of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including over screed bed or bedding layer of mortar 15 mm thick (1:6) for laying of floor finishes all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window /Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms) fabricate with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (Edge) minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property and fire retardant fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia & length complete all as spd and directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window /Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms) fabricate with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (Edge) minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property and fire retardant fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia & length complete all as spd and directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as spd and directed.(Note:s/s butt hinges and necessary SS screws shall be paid separately)

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F of Factory made wire gauzed PVC door shutter 28 to 30 mm thick (style) consisting of wire gauze in lieu of PVC sheet panel inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) frame made out of MS tubes for top & bottom rails.The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly. MS frame shall be covered with heat moulded decorative colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, suppling & fixing in the frame at site as per specification & drawing in SSR Part II. complete all as specified and as directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 100 mm long SS butt hinges medium weight, complete all as specified and directed .

S&F SS 150 mm long barrel tower bolts of extruded section & fixed complete all as specified and directed.

S&F SS 150 mm size handles cast type anodized complete all as specifed and directed

S & F 250 mm long SS, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F of brass door spring of size 300 mm to wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an approved colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws etc including dismantling of asbestos cement (corrugated/semi corrugated etc.) sheets in roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zince coating GI based plain steel sheet 0.50 mm thick of an approved colour having tensile strength of 550 mpa as in ridge of roof covering/cladding to wall, fixed with self tapping screws etc including dismantling of plain or corrugated steel sheeting in any gauge, thickness for roof coverings etc complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section in framed work , in any position complete all as specified and directed.

S&F Steel work in tubular trusses including rafter, purlins and post etc with special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 complete all as specified and directed

M&L for dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for providing false ceiling using cement fiber board of size 600x600x6 mm and GI snap grid frame complete all as specified and directed. Frame Work (i) GI angle of size 25x25 mm screwed fixed to the parimeter of the wall at a level/height as directed by Eingeer-in-Charge. (ii) Main 'T' runners sections (3600 mm loing) with 'H' slots at 150 mm/300 mm center in its vertical flange to hold the cross 'T' sections are suspended from the soffits with the help of rawl plug, soffits cleats and GI wire (4 mm dia) at 1200 mm c/c. These sections also have notch at its both ends to increase the length. (iii) Cross "T" runners : Section of 1200 mm length with 'H' slot in the center and notched at the both ends are inserted fixed into the main "T" at 600 mm c/c to form a regular grid of 600 x 1200 mm cross "T" section of 600 mm length is inserted fixed into the 1200 mm cross "T" to form a regular grid of 600 x 600 mm.

M&L for non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed and filled with epoxy and pointed in white or coloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement & sand mortar 1:6 including dismantling of floor hearth tiles complete all as specified and as directed.

M&L for coloured glazed ceramic tiles 600 x 300 x 8-9 mm thick on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over rendering 10 mm thick in CM 1:4 on wall including dismantling of wall tiling complete all as specified and directed.

M&L for dark Shade double ultracharged virified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of tiles complete all as specified and directed. Make : Somany, Kajaria or Johnson.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

M & L for brick work with sub class 'B' bricks, old sizes , straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as spd and as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for rendering 15 mm thick (in two coats of 10 mm and 5 mm thick) on fair faces of brick work or concrete surfaces in cement mortar 1:4 with integral water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid for separately.

M&L for plastering 10 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for plastering 5 mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound.

M & L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over one coat of alkali resistant primer over 2 mm wall care putty complete all as specified and as directed.

Preparation of newly plastered surfaces on ceilings and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior weather paint over one coat of primer complete all as spd and as directed.

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness (below or above the ground level) built in cement mortar complete all as specified and directed.

M&L for hardcore of broken stone boulder of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in sub base of flooring etc complete all as specified and as directed.

M&L for 25 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in flooring etc complete all as specified and as directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed compelet all as specified and directed

M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protection etc complete all as specified and directed.

S&F rotational moulded polythene water storage tank of capacity 500 liters (Cylindrical /vertical with close top) triple layer construction fixed in position with ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore pipe minimum weight 210 gms etc including dismantling of old PVC tanks complete all as specified and as directed

S&F in repair CP Shower rose with arms 125 mm dia with size complete all as specified and as directed

S&F in repairs brass cromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, fixed with rawl plugs. all as specified.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store

Supplying and laying of 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches or walls complete all as specified

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches or walls complete all as specified

S&F in repair 20 mm bore dia of pipe Stop valves/Gate valves cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed.

S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed quarter turn with water saving nozzle”, complete all as specified and as directed.

S&F in repair 15 mm fancy type CP Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs 10 litres capacity, low level, syphonic action type, white, plastic flushing cistern as per IS 7231: 1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe complete all as spd and as directed.

S & F in repairs wash basin, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed.

S & F fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed quarter turn with water saving nozzle”, complete all as specified and as directed.

S&F vitreous china pedestal pattern type wash down water closet pan white with EWC seat cover and floor mounted fittings etc complete all as per the manufacturers instruction and as directed by the Eng-in-Charge

S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F PVC connections 15 mm size of PTMT of 600 mm long complete all as specified and directed.

S&F in repairs PTMT waste pipe 32 mm bore of length up to 80 cm for WHB/unrinal pots, complete all as specified and directed.

S & F stainless steel curtain rod including bracket and holder made out of stainless steel sheet of grade X 02Cr19Ni1O (304 S2), surface finish No. 4 as per IS 6911: 2017, 25 mm dia complete all as specified and as directed.

M & L for complete removal of existing finish on walls including chajjas, facias etc and preparing and applying premium acrylic smooth exterior paint (100% acrylic) with silicone additives in two or more coats, that offers an anti-algal, excellent resistance to ultraviolet radiation, dirt pick up resistance (DPUR) property, rich sheen, low VOC, of approved shade over a coat of primer as per the manufacturer’s instructions, applying using brush, keeping the gap/ the interval in subsequent coats, including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as spd and as directed.

M & L for complete removal of existing treatment of wall, preparation and applying two coats of oil emulsion distemper with 2 mm thick wall care putty over one coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of old surfaces of ceilings including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling, complete, all as specified & directed.

M&L for ATT as treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for ATT for flooring as treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for ATT as treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

Demolition of RCC work of any description and in any position etc all as specified.

M&L for RCC (Reinforced Cement Concrete) (nominal mix) Type B1 1:2:4 using (20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) complete all as spd and directed.

M&L for TMT bars 10 mm dia and over cut to length, bent to shape as required incl cranking bending hooking ends and binding with mild steel wire (annealed ) not less than 0.9 mm dia for lintel, column,footing and any other structural member complete all as specified and as directed.

M&L TMT Bars 8 mm dia, cut to length, bent to shape as required including cranking, bending, hooking ends and binding with MS Wire (annealed) not less than 0.9 mm dia, as in stirrups for column, plinth beam, beam and lilten spaces and binders complete all as specified and as directed.

S& F 4 mm thick Aluminium Composite Panel fixed to framed work and the joints of all panels around the frame and shall be made seamless from all sides with the use of silicon or as per manufacturers instructions complete all as specified and directed.

S&F stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

Taking down carefully point wiring from existing place ie light, fan socket or power points complete with all fittings such as switches, sockets, ceiling rose pendants, holders etc and making good to disturbed surface of wall, floor etc to match with existing surface complete all as specified and directed.

M & L for switch flush type single pole one way 5 Amps, 240 volts, white ivory finish complete all as approved

M&L for ceiling rose surface Bakelite two to three terminal, 18 x 50 mm complete all as specified.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Taking down carefully from existing place for ceiling fan and removing to MES store yard , scraping, cleaning & painting with two coats of super enamellled paints ( as approved by GE) greasing/oiling and refixing at site in serviceable condition complete incl electric connection with three core flexible wire 1.5 sqmm all as specified and directed.

Please Enable Macros to View BoQ information