Providing and fitting of electro mechanical components of 10000 GPH x 300 meter head x 100 hp pump set installed at pumping station Rakh Badali and replacement of damaged / wornout parts of 110 ampere rating panel installed at pumping station Jib s

Amount

Providing and fitting of electro- mechanical components of 10000 GPH x 300 meter head x 100 HP pump set installed at pumping station Rakh Badali by way of disconnecting of all electrical connections, decoupling of pump from motor, carrying pump set from pumping station to road side by way of head load and then to work shop by mechanical transportation. Providing and fitting of new pump shaft, turning and finishing to the original bearing size. Providing, fabrication and fitting of new impeller 06numbers, fabrication /fitting of neck rings 7 nos. diffusers 6nos., shaft protection sleeve 2nos., gland plate-2nos. with check nut 2 nos. Providing and fitting of new bearings 7308-2nos. and N308-1no. Providing fabrication and fitting of new tie bolts with nuts. Drilling and taping of suction and delivery. Shifting of pump set back to pumping station by using manual labour tools and tackles and mechanical transport. Coupling pump motor set with new coupling bolts and rubber bushes after making proper alignment and leveling and thereafter testing the pump set on load at site. Providing and fitting of nuts and bolts and leather flanges at delivery and suction side. Job includes the cost of material, labour charges, hire charges of tools and tackles etc. Rebate, if any, should be quoted separately.

Replacement of damaged / wornout parts of 110 ampere rating LT control panel cum auto starter cum fault analyzer installed at pumping station Jib stage-1st (old) . The job involves dismantling of all the incoming and outgoing power cables from the panel and shifting to workshop. Job includes extraction of damaged / worn-out main and delta contactor MNX-110-2nos. Subsequently providing and fitting of 02no. new MNX-110 power contactors of reputed make alongwith fault analyzer unit of same rating and specifications Replacement of voltmeter, amperemetre, fuse set by providing and fitting of new one. Job also covers internal rewiring in place of wornout / damaged wiring and shifting back to the site. Testing of the equipment after repairs, without load and thereafter on full load. Job includes the cost of material, labour charges, hire charges of tools and tackles. Rebate, if any, should be quoted separately.

M/S RAGHUNATH MECHANICAL AND ELECTRICAL ENGINEERING WORKS

NATIONAL ELECTRO-MECH COMPANY