Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 LAccepted-AOC | ₹7.0 L | L1 | Accepted-AOC Accepted |
| 2 | L2₹7.3 L+₹26,119.14 (3.71%)Rejected-AOC 17 A SHYAMA JI PURAM I I T SOCIETY IIT KALYANPUR KANPUR UTTAR PRADESH 208016 | KANPUR NAGAR | UTTAR PRADESH | 208016 | ₹7.3 L+₹26,119.14 (3.71%) | L2 | Rejected-AOC Rejected |
| Sl No | Description | Qty | Unit | Krishna and Co L2 | Suriyakala S L1 |
|---|---|---|---|---|---|
| 1.01 | 1.Repairs to Angarayanallur PUE School RCC Building in Angarayanallur Panchayat (East Facing)
Clean removal of cement plaster from walls including all labour charges, etc., copmlete | 183.47 | Sqm | 10 ₹1,834.7 | 9 ₹1,651.23 Lowest |
| 1.02 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. | 128.64 | Sqm | 315 ₹40,521.6 | 308.8 ₹39,724.03 Lowest |
| 1.03 | Plastering with Cement Mortar 1:5 (One cement and Five P.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. | 60.25 | Sqm | 300 ₹18,075 | 290 ₹17,472.5 Lowest |
| 1.04 | Dismantling, Clearing away and caefully stacking materials useful fue re-use for any thickness of one course of pressed tile roof finish in cement mortar | 111.27 | Sqm | 30 ₹3,338.1 | 27 ₹3,004.29 Lowest |
| 1.05 | Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) | 9.38 | Sqm | 145 ₹1,360.1 | 140 ₹1,313.2 Lowest |
| 1.06 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers. (50% Old and 50% New) | 116.4 | Sqm | 1,250 ₹1,45,500 | 1,181 ₹1,37,468.4 Lowest |
| 1.07 | Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer . | 125.1 | Sqm | 155 ₹19,390.5 | 150.4 ₹18,815.04 Lowest |
| 1.08 | Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer . | 131.4 | Sqm | 155 ₹20,367 | 150.4 ₹19,762.56 Lowest |
| 1.09 | Re-Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) | 168.9 | Sqm | 275 ₹46,447.5 | 267.4 ₹45,163.86 Lowest |
| 1.10 | Painting two coats with approved Black Oxide for Old Black board. | 12 | Sqm | 165 ₹1,980 | 156.8 ₹1,881.6 Lowest |
Tender Value
₹7.1 L
EMD Value
₹7,200
Closing Date
26 Feb 2026, 3:00 pmClosed
Block Development Officer (BP)
Panchayat Union, Jayankondam
Repairs of School Buildings 2 Nos in Angarayanallur Panchayat in Package No.1 in Jayankondam Block of Ariyalur District under RBMS 2025-26
2026_RDTN_666230_1
A5/406/2026,Dated.20.02.2026
Open Tender
Civil Works - Others
Works
30 days
Panchayat Union, Jayankondam
As per Tender Document
4 documents required · 4 mandatory
₹0
₹7,200
6 Jul 2026
25 Feb 2026
26 Feb 2026
25 Feb 2026
26 Feb 2026
25 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | 1.Repairs to Angarayanallur PUE School RCC Building in Angarayanallur Panchayat (East Facing)
Clean removal of cement plaster from walls including all labour charges, etc., copmlete | 183.47 | Sqm | - | - |
| 1.02 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. | 128.64 | Sqm | - | - |
| 1.03 | Plastering with Cement Mortar 1:5 (One cement and Five P.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. | 60.25 | Sqm | - | - |
| 1.04 | Dismantling, Clearing away and caefully stacking materials useful fue re-use for any thickness of one course of pressed tile roof finish in cement mortar | 111.27 | Sqm | - | - |
| 1.05 | Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) | 9.38 | Sqm | - | - |
| 1.06 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers. (50% Old and 50% New) | 116.4 | Sqm | - | - |
| 1.07 | Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer . | 125.1 | Sqm | - | - |
| 1.08 | Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer . | 131.4 | Sqm | - | - |
| 1.09 | Re-Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) | 168.9 | Sqm | - | - |
| 1.1 | Painting two coats with approved Black Oxide for Old Black board. | 12 | Sqm | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.55 MB
PriceBid1.pdf
Tender Documents • 0.71 MB
TechnicalBid1.pdf
Tender Documents • 0.82 MB
BOQ_800260.xls
BOQ • 0.30 MB
Corrigendum.pdf
PDF • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .