SPL REPAIR TO LRW SHED NO. T- 82, T- 86 AND T-87 OF 9 PARA FD REGT GE (WEST) AGRA

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Disposal of removed/demolished soil/materials exc 1.50 km but n. exc 5 km and depositing where directed complete all as specified and directed

M&L cement concrete type B-0, 1:2:4 mix ( 12.5 mm graded agg) in, padding, roof kerbs or mud stops, rounded or chamfered on edges and similar work all as specified and directed.

M&L RCC Type B1 1:2:4 Type using (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and complete all as specified and directed.

M&L Formwork , flat surface to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams etc

M & L for mild steel TMT bar 10mm dia and (Fe410-W, Gde E-250quality-A) over cut to length, bent to shape required, including cranking, bending spirally, binding wire (0.90mm dia annealed) complete all as specifed and difrected.

M & L for mild steel TMT bar 5mm and upto 8mm dia as in stirrups cut to length, bent to shape required, including cranking, bending spirally, binding wire (0.90mm dia annealed) complete all as specifed and difrected.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection ( 75 mm thick ) laying in alternate ways finished even and smooth without using extra cement plinth protection shall be laid to alternate bay system each bay shall exceed 3m in lentgth complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 20 mm graded crushed stone aggregate) as in floor, 100mm thick laying in alternate ways finished even and smooth without using extra cement in floor , shall be laid to alternate bay system each bay shall exceed 3m in lentgth complete all as specified and directed.

M&L forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed but except brick. Note:- Bricks obtained from item No 12 shall be reused after cleaning.

M&L Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified & directed

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying ement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound finished other than fair complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.

Supply only liquid water proofing compound complete all as specified and directed.

M & L for rendering 5 mm thick in CM 1:4 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper with roller application over a coat of primer over a coat of average 1mm thick wall care putty on new plastered surfaces complete all as specified and directed.

M&L for applying two coats of oil bound distemper with roller on old decorated wall surfaces over 1 mm thick white putty including complete removal of existing treatment with mechanical complete all as specified and directed.

M & L for applying 1mm thick water proofing putty and two coats of Acrylic weather proof Exterior paint on new plastered or unplastered surface of walls or concrete including preparation of surfaces at any height (not exc11 Mtr) including necessary scaffolding/centering etc complete all as specified and directed.

Providing Acrylic plastic number plate of size 300mmX 300mm X 3mm and writing building No. of height 10 to 15 cm in any style (bold/italic) and fixed to wall with screws complete all as specified & directed.

S&F 5.0 cm thick sand stone slabs in sun shades, chajjas, shelves, roof slabs etc n.exc. 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM 1:4 complete all as specified and directed.

S&F welded steel wire fabric welded to MS frame for Ventilator etc including all cutting and waste (wt not exc 4.00 kg/Sqm) complete all as specified and directed.

M&L for treatment of soil under existing floors using anti termite emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes and matching with existing floors by using cement mortar 1:2 (1 cement :2 coarse sand) complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section framed work in any position complete all as specified and as directed.

Dismantling structural steel work in cluding doors, gates but excluding framed truss etc. complete all as specified and as directed.

Dismentling wall and ceiling board or insulation board /slabs/ blanket any thickness including cover fillets.complete all as specified and as directed by Engr-in-charge

Dismentling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings

S&F rolled MS Fe 410W (Gde E-250) quality A for Roof truses (framed), trussed, purlins, crane grantries, rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, clests etc complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L 2mm Thick, Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with Ltype or J type hook bolt in roof, wall etc

S & F Gl frame work grid of size 605 x 605 mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified, complete all as specified and directed.

M&L for 4 mm thick non asbestos fibre cement building designer boards fixed in ceiling or laid/inserted to timber/GI/aluminun frame complete all as specified and directed

S & F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall complete all as specified and directed.

S & F solid PVC wall lining consisting of 5mm thick wooden grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350 x 250 x 7 mm / 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed .

M&L non skid joint free coloured tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18Sqm but not exc. 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed. (bed room and other room floor)

M&L vertified ceramic tiles 10 mm thick (square/rectangular) area of each tile exceeding not exc. 0.36Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed.(toilet,bath,kitchen, passage floor)

M&L vertified ceramic tiles 10 mm thick (square/rectangular) area of each tile exceeding not exc. 0.36Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.(toilet,bath,kitchen, passage floor)

M&L 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base of flooring finished even and fair without using extra cement complete all as specified & directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 20mm thick screed bed CM (1:6) complete all as specified and directed.

M&L Machine cut kota stone 20-25 mm thick as in riser of step, skirting,dado and pillar etc. laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing laid over and including 15mm thick rendering CM (1:4) complete all as specified and directed.

S & F in repairs 15 mm bore chromium plated fancy bib taps long body, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm bore CP Stop valve / angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F in repair 15 mm bore CP fency Stop valves, cast copper alloy, screwed down,high pressure, with crutch or butterfly handle,screwed both,ends for iron,pipe or for unions and fixed complete all as specified and directed.

S & F in repair tubular towel rail 60 cm length of stainless steel 20 mm Dia with brackets type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S & F in repair health faucet with 15mm dia 1.25 mtr long flexible tube and wall hook chromium plated complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including flush pipe, brackets, rubber bush, washers etc complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white with 'P' or 'S' trap incl seat and cover (excluding fluxing cistern and flush pipe) complete all as specified and directed.

S&F in repair 100 mm square Stainless steel grating with openable flap complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed

S&F Waste coupling of CP (half or full threaded) of 32mm bore suitable for wash hand basin complete all as specified and directed.

S&F 32 mm dia PVC waste pipe for wash basin complete all as specified and directed.

S&F in repair 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI engraved (cylindrical vertical with closed threated top) hoisted and fixed in position complete all as specified & directed.

S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.

S&F 15mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth etc brick wall complete all as specified and directed.

S & F 15mm to 20mm male Brass Threaded Adaptor (MTA/ MBTA) ) pipes any location complete all as specified.

S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and suitable clamp fixed to wall complete all as specified and directed.

S & F 75 mm bore PVC (SWR) bends sith complete fittings of any radius complete all as specified & directed.

S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends with complete fittings of any radius complete all as specified & directed.

S&F 110 mm bore PVC (SWR) single T with access door of any radius complete all as specified & directed.

S & F 110 mm bore PVC (SWR) cowl of any radius complete all as specified & directed.

S & F in repair 100mm dia cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete

S & F in repairs 100mm dia of cast iron floor trap, plain with grating incl jointing with solvent cement concrete type B-1 (1:2:4) complete all as specified and directed

S & F in repairs 125/110 mm dia of PVC (SWR) Gully trap, plain with grating incl jointing with solvent cement complete all as specified and directed.

S&F in repairs Stainless steel drapery rods, 20mm internal diameter including decorative type brackets and PVC curtain rings 8 Nos per RM including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed.

S&F for framed work such as grills, grating etc. with ends of bars shouldered and/or riveted or forged into spike, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tank and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

M&L 1.6mm th Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles omplete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45X85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetc complete all as specified and directed.

M&L for Factory made WPC (Wood Polymer Composite) Double Rebated frame of solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x150 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetc complete all as specified and directed.

Factory made single extructed WPC (wood polymer Composite) solid Plain flush door shutters of 35 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minumum dencity of 650 kg/ cum and screw withdrawa strenth of 1800 N (Face )&900 N (Edge), minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed with steelness steel butt hinges of requred size with necessary full body threank SS screw all as direction of engr in charge ( steelness srew and butt hinges and necessary SS Screw shall be paid separatly)

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 174 of SSR 2020 (Part-II)

M&L 35mm 2nd class, Factory made Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and directed.

S & F Solid PVC door frame for PVC doors, Kitchen cabinet of size 50mm x 47mm made out of 5mm PVC sheet reinforced with MS square tube, as shown on drawings as per manufacturers specification complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tack or galvanised wire staples complete all as specified and directed.

S & F PVC door( back side) stopper 75mm long complete all as specifed and directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F Floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S & F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as spd and dir.

S&F 125mm long aluminium anodised Hasp and Staple, safety type including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 100 mm long stainless steel hinges type B-12 complete all as specified and directed.

M&L cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in bed blocks for fixing hold fasts etc. complete all as specified and directed.

Eco-4000 Series windows fabricated from roll formed sections made of Galvanized steel colour coated/powder coated (Base steel as per IS 513"D" quality, galvanized as per IS 277 with finc of 120 gms/ sqm) with total coated thickness of 0.60mm. Sections shoulld be with primer coat of epoxy primer of 5-7 microns, or powder coated with pure polyester powder up to 50-60 microns thick. Section for frame should be of 72mmx50mm, section for mullion should be of 72mm x50mm, section for shutter frame should be of 47mmx20mm, section for fixed glass bead shoulld be of 12mmx12mm and section for fly mesh shoulld be of 40mmx20mm. Each glazed shutter and mesh shutter shoulld be provided with SS pivot hinges-1 set sec color handle and stay. Each glazed shutter and fixed glass portions should be provided with a glass of 5mm plain float glass. Mesh shutter should be provided with stainless steel 32 guage fly mesh of 304 grade with 144 holes per sq.In. Window should be provided with grill made of 10mm sq MS bars welded to at 150mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws.

Eco-4000 Series Ventilator fabricated from roll formed sections made of Galvanized steel colour coated/powder coated (Base steel as per IS 513"D" quality, galvanized as per IS 277 with finc of 120 gms/ sqm) with total coated thickness of 0.60mm. Sections shoulld be with primer coat of epoxy primer of 5-7 microns, or powder coated with pure polyester powder up to 50-60 microns thick. Section for frame should be of 72mmx50mm, section for mullion should be of 72mm x50mm, section for shutter frame should be of 47mmx20mm, section for fixed glass bead shoulld be of 12mmx12mm and section for fly mesh shoulld be of 40mmx20mm. Each glazed shutter and mesh shutter shoulld be provided with SS pivot hinges-1 set sec color handle and stay. Each glazed shutter and fixed glass portions should be provided with a glass of 5mm plain float glass. Mesh shutter should be provided with stainless steel 32 guage fly mesh of 304 grade with 144 holes per sq.In. Window should be provided with grill made of 10mm sq MS bars welded to at 100mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws.

S& F for aluminium anodised powder coated aluminium frame for doors, windows ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S & F for aluminium anodised powder coated door shutters, Aluminium section weight of 0.55Kg/RM including necessary joining cleats, glazing clips, rubber neoprene packing, tower bolt -02Nos, handle 2 Nos, Door stoper -01 in each door, hinges anodised aluminium snap beading screws etc complete all as specified and dircted.

S&F 12 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber/ aluminium frame work and sealing edges of board with PVC beading by chemical adhesive complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed.

M & L for applying one coat of synthetic enamel paint including preparation of old Iron surface of any discription not otherwise discribed over 10 cm width or girth, complete all as specified and directed.

S&F plain 4mm dia plain MS Wire galvanised class3 in detached work such as mosquito nets and fixing to straining bolt, hook and eyes etc , coplete all as specified and directed.

M&L for 75mm thick plain cement concrete (1:4:8) type D2 using 40mm graded aggregates as in path, hard standing complete all as specified and directed.

M&L machine pressed, Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed in neat cement slurry and pointed in gray pigment cement and pigments neat cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

Taking up / down for 25 mm bore old GI pipe and connection complete all as specified and directed.

Taking up / down for 20 mm bore old GI pipe and connection complete all as specified and directed.

Supply and fix 'Medium Grade' galvnaized iron tubes with all fittings such as tees bends elbow etc laid in trenches of 25 mm bore complete all as specified and directed.

Supply and fix 'Medium Grade' galvnaized iron tubes with all fittings such as tees bends elbow etc laid in trenches of 20 mm bore complete all as specified and directed.

Supply and fix gun metal gate valve of size 20 mm bore with iron wheel head screwed both ends for iron pipe and fixed of following sizes complete all as specified and directed.

Excavation in trenches n. exc. 1.5m width and n. exc. 1.5 m depth and getting out for laying of pipes etc in any type of soil complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and as directed.

Removing excavated material n.exc. 50 m and depositing where directed at a level n. exc. 1.5 m above starting point complete all as specified and directed.

M&L for drilling and tapping cast iron water mains (in position) for branch connections of the internal 25 mm dia complete all as specified and directed.

Disconnecting & taking up or down existing unserviceable UG cable / serivce wire aluminium conductor including GI wire any size and type complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 4 core complete all as specified and directed.

Supplying and laying un-rainforced precast concrete cable cover LV type-I flat size 250 mm x 150 mm x 40 mm in trenches for protection of cable complete all as specified and directed.

M&L for sand cushioning dry fine for cable cushioning below and above the cable complete all as specified and directed.

Supply and fixing GI pipe 40 mm light grade for cable protection laid in trench under raod or path or fixed on pole or wall with clamps with all fittings complete all as specified and directed at site.

Taking down carefully copper/aluminium point wiring on batten/ PVC conduit (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc, including removal and making good disturbed surfaces of walls, ceilings etc by cement/ colour /plaster to match with the existing location spot complete all as specified & directed.

M&L for concealed point wiring for one light point / fan point / bell pointed controlled by one switch (using red, black and green colour coding) complete with 1.50 sqmm unsheathed and multistranded copper conductor single core FRLSH PVC insulated, 1100 volts PVC insulated unsheathed cable with proper colour coding drawn in through and including PVC concealed conduit not less than 25 mm dia (medium duty ISI marked) with all fittings and accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc including pressed steel powder coated sunken terminal box suitable for modular switch socket and non modular switches and sockets including provn of 1.5 sqmm single core FRLSH PVC inslulated multi standed copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good disturbed surfaces of walls / celing / floors etc by using CM ( (including its hylum sheet, min 60 mm deep suitable for size) concealed in wall including inner and outer plates (cover plate) suitable for fixing modular switch / socket / regulator etc including provn of sqmm single core FRLSH PVC insulated multi standed copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good disturbed surfaces of walls / ceiling / floors etc by using CM (1:3) complete all as specified and directed. Note :- Modular and non - modular switches / socket / regulator shall be measured and paid separately under appropriate item

All as per item No.124 here in before one socket out let 5/6 Amps on independent switch board controlled by one switch complete it with 2.5 sqmm unsheathed and multsitranded copper condcutor single core, complete all as specified & directed.

All as per item No.124 here in before but one socket out let 5/6 Amps controlled by one switch on the same board with other switches complete it with 2.5 sqmm unsheathed and multistranded copper conductor single core complete all as specified & directed.

All as per item No.124 here in before but using 2.5 sqmm PVC FRLSH insulated stranded copper conductor cable and for one socket outlet 3/6 pin, 15/16 Amps controlled by one 1 way switch on indepdendent board complete all as specified and directed. NOTE-For item No 124 to 127 -: (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface.The portion of point wiring at RCC Columns / Beams / Ceilings etc shall be in surface conduit of suitable size fixed on surface with using PVC rawl plug and provision of covering terminal boxes / junction boxes of any shape and size with 3 mm thick bakelight laminated sheet fixed with suitable GI screws and cup washers.. (ii) Fittings like switches,sockets,regulators,lamp holders,light fittings shall be measured and paid for separately under appropriate item of schedule A. (iii)The size of conduits shall be determined on permissible no of runs of wires as specified in SSR part-I clause 19.125 (B).However minimum size of conduit shall be 25 mm dia (medium grade). (iv) The rate of all type of conduit, fittings, rawl plugs etc deemed included in items.

All as per item No.129 above but using 4.0 sqmm PVC FRLS insulated stranded copper conductor cable and for one socket outlet 3/5/6 pin, 15/16 A controlled by one way switch on an independent board complete all as specified and directed.

Supply and fix modular switch single pole, one way 5/6 Amp 1 module complete all as specified and directed.

Supply and fix switch piano flush type, single pole, 5/6 Amp one way, 230 volts complete all as specified and directed.

Supply and fix modular switch 15/ 16 Amp single pole one way, one module complete all as specified and directed.

Supply and fix switch piano flush type, single pole, 15/16 Amp one way, 230 volts complete all as specified and directed.

Supply and fixing modular socket outlet 3 pin 5/6 Amps combined complete all as specified and directed.

Supply and fix socket outlet 5/6 Amps, flush type, 3 pin 230 volts complete all as specified and directed.

Supply and fix modular socket multipurpose 3/5 pin 15/16 Amps combined 2 module complete all as specified and directed.

Supply and fix socket outlet, multi purpose 3/5 pin 15/16 Amps complete all as specified and directed.

Supply and fix modular step type 2 module electronic fan regulator heavy duty 120 watts 240 volts complete all as specified and directed.

Supply and fix step type electronic fan regulator heavy duty 120 watts 240 volts complete all as specified and directed.

S&F switch, bell push buttom, single pole, 5/6 Amps, one way 230 volts complete all as specified and directed.

Supply and fix call bell, ding dong type 230 volts AC single pole complete all as specified and directed.

Supply and fix modular cover plate with metal frame (inner and outer ) 2 module for mounting switch and sockets complete all as specified and directed.

Supply and fix modular cover plate with metal frame (inner and outer ) 3 module for mounting switch and sockets complete all as specified and directed.

Supply and fix modular cover plate with metal frame (inner and outer ) 4 module for mounting switch and sockets complete all as specified and directed.

Supply and fix modular cover plate with metal frame (inner and outer ) 6 module for mounting switch and sockets complete all as specified and directed.

Supply and fix for ceiling rose PVC polycarbonate isolated body 62.5 x 25 mm, three terminals complete all as specified and directed.

Supply & fix commissioning and testing of complete power cum starter unit compressing of ON / OFF switches socket 3 pin socket outlet with plug top modular type made out of white polycarbonate, fire retardant, UV stabilized power unit internally pre-wire with suitable size copper conductor cable with overlead protective device (MCB) complete unit fixed in single polycarbonate housing with inlet & outlet cable port suitable for AC & geyser operated at sintle phase, 240 volt, 52 Hz AC supply of capacity 20 Amps load bearing capacity complete all as specified and directed.

Supply and fixing Led luminiare 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F in replacement LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser in built electronic driver duly wired upto terminal block, power consumption <20W, luminaire lumen >2000 Im, system efficiency of >120 lumens / W, LED make Nichia / Cree/Everlite / Eclision / Osram / lumiled with LED binning as per ANSI Bin C 78.377A, photo biological safety report to 450C, driver efficiency >85% power factor >0.9 THD <20% as per IEC 61000-3-2, colour temp-6500K, Surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stage isolated constant current operated driver with range 150-270 V AC and safety extra low voltage safe level <60V DC as per IEC standard with LM 70 & LM 80 certification.

Supply and fix 20W inverter LED batten of size 4 ft in length with square profile and polycarbonate channel, Lithium lon battery with charging time 8 hours - 10 hours and back up time upto 3 hours including connecting up with three core flexible copper conductor cable of size size from ceiling rose complete all as speciifed and directed.

Supply and fix LED light fitting mirror type with high out put diffuser 2 feet, ultra slim square profile liner LED lighting fixture with extruded polycarbonate body with 9 watt 220 V AC decorative type with driver holder and LED lamp with a nominal system output of 120 lum / watt (min) with PF not less than 0.9 including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement LED security with aluminium pressure die cast housing, high purity PC fresnel diffuser with silicon gaskets for IP-65 protection, power consumption of 35 W and system efficiency >100 Im / W, in built electronic driver pre-wired upto terminal block with driver efficiency >85% power factor > 0.95, suitable for external pole upto 35 mm LED make :- Nichia /Cree/ Osram, CRI > 70 ambient temperature range 0-450c, THD <10% colour temperature 5700K, surge protection cm 3.5KV 50000 burning hour as per L70 criteria, multi stage constant current constant voltage operated driver with range 150-270 V AC and safety extra low voltage safe level <60V DC as per IEC standard including GI pipe medium grade ISI mark of size 32 mm dia length not less than 1.5 mtrs bending to shape for fixing light and nuts, bolts, clamp as required to fix to wall all as specified and directed.

Supply and fix high wattage LED lamp offers more brightness with wider light spread of rated wattage of 60 W, 6000K lumens, power factor >0.9, color temp 6500K, CRI > 80, Beam angle > 120 degree, with IP 20 protection glass complete all as specified and directed.

Taking down carefully sub main wiring / service connections of any size including batten / conduit and making good the disturbed surfaces of wall / floor complete all as specified and directed.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

Taking down distribution boards any size any type including MCB TPN/SPN/SP/DB etc and making good the disturbed surfaces complete all as specified and directed.

Supply and fix MCB DB vertical type 4 way VTPN sheet metal enclosure 415 volts with 100 Amp fully insulated standard copper bus bar for each face & surrounded with neutral bars and two common neutral bar, two earth bar including cable ties for cable manegement suitable for housing MCCB TPN 415 Volts as incommer, IP-43, IK-09 as per IEC 61439-3 with metal doors all enclosed on standard steel sheet flush mouting type double door factory fabricated complete without MCB & MCCB but with enclosue blank plate complete all as specified and directed .

Supply and fix in replacement MCB DB sheet metal enclosure factory fabricated double door SPN 12 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doors complete all as specified and directed.

Supply and fix in replacement MCB DB sheet metal enclosure factory fabricated double door SPN 8 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doors complete all as specified and directed.

Supply and fix MCCB of rating 100 Amp, 4 pole, 415 V, AC fixed type with breaking capacity 25 Ka DPX³ 160 type, as per ICE-60947 -1 Ics 100% of Icu, Adjustable tripping 0-0.3-1-3s with adjustable 70% to 100% and thermal magnetic release to be fixed in existing LT panel for taking in coming electric connection for VTPN DB complete all as specified and directed at site.

Supply and fixing in replacement MCB SPN 240V, 50 Hz, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity SPN 40 to 63 Amp rating in the MCB DB complete with connection testing and commissioning complete all as specified & directed.

Supply & fix in replacement MCB SP, 40 Amps, 'C' Curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed.

Supply & fix MCB SP, 6 to 32 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louver shutter, voltage 230 V, 50 Hz, RPM 1200, copper winding of sweep 300 m complete all as specified and directed.

Supply and fix ceiling fan, 1200 mm sweep, minium 210 CFM, 230 V, BEE 5 star rated, BLDC (brushless direct current motor) type complete with standard accessories i.e. (three blade, 02 Nos canopy, electronic type modular fan regulator 90 to 100 W, down rod of length 1.5 mtr to 2.0 mtr long, 01 No. fan hock, 02 Nos hanging clamps with rubber real insulator, nuts, lock nuts, bolts, washers, split locking pins etc) double ball bearing, copper wound with synchronous motor, including electrically connecting form ceiling rose to fan connector with 0.5 mm stranded copper conductor 3 core flexible cable and complete all as specified and directed.

M & L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 complete all as specified and directed.

Supply and fix drawn 2 pair conductor of size 0.5 Sqmm copper PVC insulated and over all screened with tinned copper net and PVC insulated complete all as specified and directed (for Telephone)

Supply and fix dish TV cable coard of size 1.5 Sqmm solid copper conductor triple insulated steel wire mess inner sheathing earth continuity conductor and over all PVC sheathed circular complete all as specified and directed.

Supply & fix cable telephone outlet socket switch type flush mounted RJ-11 including modular cover plate and metal flush box complete all as specified and directed.

Supply & fix cable TV outlet socket switch type flush mounted incluidng modular cover pplate and metal flush box suitable for TV cbale cord connection complete all as specified and directed.

M&L for rigid non metallic PVC conduit (medium quality ISI marked) 2 mm thick exclusive of boxes (junction / terminal) 25 mm dia (external) for telephone & TV cbale wiring but inclusive of all fittings such as tees, bends, reducers, bell mouth, tube ends and concealed to wall / roof / floor complete all as specified and directed.

M/s Krishna Construction Company (BID ID -3321492)

Lachman Das Govind Ram (BID ID -3322369)

M/S DEVENDRA KUMAR GUPTA (BID ID -3338722)

CREATIVE CONSTRUCTION (BID ID -3338595)

ASHISH SHARMA (BID ID -3335368)

Sree Ram Enterprises (BID ID -3338557)