PROVN OF SYNTHETIC GRASS VOLLEY BALL COURT AND HIGH MAST LIGHT AT 46 WEU AFS BAGDOGRA UNDER GE (AF) BAGDOGRA

Amount

M&L for bringing approved earth/ soil from outside MoD land and forming embankments including raising (or lowering) earth, spreading in layers n.exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n.exc. 1.5 m high from base complete all as specified and directed.

M&L for 150 mm thick (compacted thickness) WBM in two layer with granite, trap or basalt coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

M&L for 100mm cement concrete,1:2:4, type B-1 (using 20mm graded stone aggregate) as in sub-floors, sub-bases, floors and pavings complete all as specified and directed.

M&L for forming Contraction (Dummy) joints 100mm deep X 10 mm wide, filled with sealing compound Grade 'A' etc complete all as specified and directed.

M&L for 8 Layer synthetic volleyball court flooring as specified by manufacturer and as directed.

Excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed.

M&L for cement concrete, 1:2:4, type B1 (Using 20mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for framed bracket of angle or tee with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting etc. n.exc 10 kg each bracket, conforming to Fe.290.Gde-E-165 complete all as specified and directed. Note: Brackets over 10 kg each to be measured under 'Structural Steel'.

Supply only steel round bar 10 mm dia and over for tying chain link fencing etc complete all as specified and directed.

Supply only chain link fencing, MS galvanised fencing, any size or type including line wires, any mesh, size and type of standard rails straining bolts etc. including provision of binding wire complete all as specified and directed. Note: Fixing shall be measured separately.

Fixing only chain-link fencing including line wires, any mesh, size and type of standards, rail, straining bolts etc. including provision of binding wire complete all as specified and directed.

Supply only screw bolt (machine made) with hexagonal or square head at one end and rounded the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, length of bolt exc 5 cm but n.exc 10 cm and dia of shank 11 to 15mm and fixed in position complete all as specified and directed.

M&L in repair, galvanised 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note: Each line wire shall be measured.

Supply and laying concertina coil 300mm dia made up of hard drawn steel wire fabric with 14mm blade clips 05 Nos in each spiral, tape thickness 0.50mm, GI stripping core wire 2.60mm thick and spiral turns per roll is 52 Nos including securing with Y shaped angle iron with available size complete all as specified and directed. Note: One roll of concertina coil should extend upto 10RM.

M&L for preparation of new untreated steel surface as of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of previously untreated surface of steel n.exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F three seater cast iron garden bench for outdoor park complete all as specified and directed.

S&F steel tubular swaged pole, type 410 SP-31 (9 meter long) complete with CI base plate and final including foundation and coping complete all as specified and directed.

S&F energy efficient LED flood light luminaire, high PF, 80W, energy saving and environmental friendly and efficacy of not less than 110 Lm/w, long life versatile pressure die cast housing, IP 66 protection, 240V, using 2.5 Sqmm, PVC insulated sheathed three core copper conductor cable, 1100V grade (upto 3.0 Mtr) for connection etc as per site requirement, testing & commissioning and complete all as specified and directed.

S&F PVC weather proof, hinged door, junction box with 240V, Neutral link, three phase connector, with IP 66/67 protection suitable for outdoor installation on pole/wall surface and including with 1 No MCB SP of 6 Amps, necessary fixing arrangement such as clamps, nut, bolts etc including dismantling old unserviceable junction box complete all as specified and directed. Make: Sintex Cat Part No. GSMB 2520, Hensel Cat Part No KF 2500H or equivalent of ISI Mark as approved.

M&L for XLPE cable insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (Heavy duty) 1100 volts grade with standard aluminium conductor of size 10 Sqmm 4 core in trenches/pipe including testing and commissioning complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs/ laying cables etc and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for clean dry sand in trenches/ ducts for cushioning to cable complete all as specified and directed. Note: Punned thickness shall be measured.

Supply and laying bricks; common burnt clay building bricks, sub-class ‘B’ designation 75 complete all as specified and directed.

Supply, installation, testing and commissioning of 16 M high mast lighting system with its accessories with 3 point suspension system with modern engineering practices. Mast shaft shall be in two sections with steel material confirming to BSEN 10025 grade S355 , hot dip galvanised confirming to BSEN ISO 1461 and suitable for wind velocity as per IS 875 and not less than 180Km/Hr. It shall also include accessories for 'high mast including head frame, steel wire rope 6 mm dia (7/19 construction), trailing cable, double drum winch, galvanised lantern carriage arrangement suitable for 8 LED luminaires of 150 watts 'symmetrically & its control gear boxes and lightning finial. The mast shall have an integral power tool installed inside the base compartment for its operation. LED flood light luminaires including all accessories and silicon filled potted driver, IP-66 protection, Model-LFLN-150-CDL/60 of CROMPTON Driver must have BIS registered to be provided. One No LED aviation obstruction lights upto 10 Watt, 240V with comprising of aluminium housing with red polycarbonate dome for better illumination, IP 66 protection to be provided. Necessary foundation PCC/RCC and earth work for removal and returning, refilling of solid etc with the following specification within the quoted rate and after obtaining necessary approval from Engr-in-Charge:- (a) Foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates to be provided. Design, casting of suitable R.C.C foundation with M-20 grade concrete considering SBC of soil as 10 T/ Sqm (after cutting of concert & bitumen's road) to be carried out as directed by Engineer-in-Charge. (b) Supply, installation & commissioning of the feeder pillar/ inbuilt control panel with housing 32 A TPN MCB incomer, double dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor and with provision of electric power cables from panel to luminaires and its internal connection complete. Make: Bajaj Electricals/CG Power & Industrial Solutions Ltd./ Jindal Powers/ Philips/ Crompton Greaves/ Havells.

Supply and laying in trenches after removing old cable and fixing or passing through pipe, 1100 Volts grade heavy duty LT UG cable, 25 Sqmm, 4 Core with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape, armoured with galvanised steel wire and overall sheathed including cable gland, lugs, jointing material etc, jointing, connecting, testing and commissioning complete all as specified and directed.

M/S Joy Construction (BID ID -3111126)

NEO BUILDERS (BID ID -3111182)

MS CHOWDHURY ENTERPRISE (BID ID -3111217)

M/S BIJAN CHAKRABORTY (BID ID -3113115)

SHRI SANJAY KUMAR GUPTA (BID ID -3115097)

M/S MANAS MITRA (BID ID -3114982)

M/s Chakraborty Enterprise (BID ID -3113235)