Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.8 LAccepted-AOC KALIBARI ROAD TINSUKIA TINSUKIA ASSAM 786171 | TINSUKIA | ASSAM | 786171 | L1 | Accepted-AOC DUE TO L1 RATE | |
| 2 | L2₹16.5 L+₹61,885.10 (3.89%)Rejected-Finance MILLONALLY LANE 3 POST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L2 | Rejected-Finance OTHER THAN L1 RATE | |
| 3 | L3₹18.2 L+₹2.3 L (14.5%)Rejected-Finance KALIBARI ROAD M S PAUL ENTERPRISE KALIBARI ROAD LUMDING KAMRUP METRO ASSAM 781001 | KAMRUP METRO | ASSAM | 781001 | L3 | Rejected-Finance OTHER THAN L1 RATE | |
| 4 | Rejected-Technical A T T MILL COMPOUND BLOCK TINALI MARGHERITA MARGHERITA TINSUKIA ASSAM 786181 | TINSUKIA | ASSAM | 786181 | - | Rejected-Technical NOT MEETING THE ELEGIBILITY CRITERIA I.E CATEGORY |
Tender Value
₹15.5 L
EMD Value
₹31,000
Closing Date
3 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
PROVN OF RECOVERY AND DENTAL STORE ROOM, PROVN OF HARD STANDING AND PROVN OF WATER TANKS FOR COOK HOUSE, BATHROOM AT TEZU UNDER GE LEKHAPANI
2023_MES_609244_3
8746/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE LEKHAPANI
₹31,000
Yes
1 Dec 2023
13 Oct 2023
7 Nov 2023
13 Oct 2023
3 Nov 2023
20 Oct 2023
Amount
Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundations,manholes,laying cables,pipe lines,etc and getting out in soft/ loose soil complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm of soft loose soil,complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum,getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
M&L Antitermite treatmanet treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.
M&L Antitermite treatmanet Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.
M&L PCC (1:4:8) type D-2, (using 40mm graded stone aggregate) as in foundations, filling, mass concrete etc complete all as specified and directed.
M&L RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in foundations, including rafts,footings,foundation beams,plinth beams;bases for columns,etc;basement slabs,under-reamed piles and mass concrete comlpete all as specified and directed.
M&L RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in columns, pillars,piers,posts and struts etc. complete all as specified and directed.
M&L RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed.
M&L RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in chajjas complete all as specified and directed.
M&L RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in slabs, supported on walls beams and columns in floors, roofs, landings, balconies, canopies, deck slabs,in shelves and the like including slabs of septic tank, soak well etc complete all as specified and directed
M&L Providing PCC(1:2:4) type B1, (using 20 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges and other similar bands including use of formwork complete all as specified and directed.
Use and waste of form work to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
Use and waste of form work to sides of pillars,columns,posts,piers and stanchions,etc for rough finished flat surfaces of cocrete complete all as specified and as directed.
Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels. Cantilevers, shelves including supports, overhangs, etc also splays between floor and beam etc for rough finished flat surfaces of cocrete complete all as specified and as directed.
Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, for rough finished flat surfaces of concrete complete all as specified and directed.
Use and waste of form work to chajjas,chullah hoods,troughs and similar items including edges for rough finished flat surfaces of cocrete complete all as specified and as directed.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight for curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
S &F Aluminum powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.72 x 1.50mm (Soction of 20832) and shutter top & bottom of size 40 x 18 x 1.55 (section 20738) and lock side shutter frame of size 40 x 15 x 1.45mm (Section 20737) with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and directed by Eng-in-charge.
S&F Aluminium powder coated door shutter single / double leaf, side hung type 44.45 mm wide (two panels) fabricated having hanging and meeting style 58.00 mm X 44.45 mm X 1.8mm thick, top rail 83.50 mm X44.45 x 1.62 mm thick, middle rail 83mmx44.45mmx1.70mm thick and bottom rail 95.25 mm X 44.45mm X 1.70 mm thick and including jointing cleats, aluminium anodised snap beading, screws, aluminium anodised fitting such as pair of 'D' type handle 250mm long (decorative type), tower bolts 150 mm long 1 Nos for each leaf, aluminium beading, PVC packing,5mm thick sheet glass, locking arrangement with mort ice lock 6 lever, 1Nos floor door stopper,with and including hydraulic door closer and necessary fittings & fixtures complete all as specified and directed by Eng-in-charge.
M&L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per Item 24 above, but 8 mm dia complete all as specified and directed.
All as per Item 24 above, but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders,etc complete all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed using 8 to 10 tonnes power roller to a true surface complete all as specified and as directed.
Rolling and consolidating formation surfaces using 8 to 12 Ton power roller complete all as specified and as directed.
M&L Forming Construction (Dummy) joint 30 mm deep x 10 mm wide filled with sealing compound Grade 'B' complete all as specified and directed by Eng-in-charge.
M & L PCC (1:2:4) type B1, (using 20 mm graded stone aggregate) in hard standing, mass concrete etc complete all as specified and directed.
M&L PCC ( 1:3:6) type C-2 (using 40 mm graded stone aggregate), as in foundations, bed concrete,filling sub base, surface channels and mass concrete,etc complete all as specified and directed.
M&L for 25 mm thick PCC (1:2:4) type B-0, ( using 12.5 mm graded stone aggregate) as in floors, finished even and smooth without using extra cement all as specified and as directed.
M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed.
M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM (1:4) for vertical surfaces such as skirting etc complete all as specified and directed.
M&L for 75 mm thick PCC (1:3:6) type C-2, (using 40 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 complete as specified and directed by Eng-in-charge.
M & L for Chequered cement concrete tiles cast in rubber moulded glossy finish of approved colour general purpose double layer of size 25cm x 25cm x 22mm thick with mixture of white and grey cement in equal proportions and pigments set and jointed and pointed in neat cement slurry in floor incl layer over 15mm thick bedding of CM (1:6) complete all as specified and as directed
M&L Rendering 10.mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified & directed.
M&L Rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces including finishing fair and even complete all as specified and directed.
M&L Rendering 5 mm thick CM (1:3) on fair faces of concrete surface on ceiling in finished even and smooth without using extra cement complete all as specified and as directed.
M&L Rendering 10 mm thick CM (1:3) on concrete surfaces mixed with WPC of Pidilite 101 of 200 ML per 50 Kg of cement finished even and smooth without using extra cement complete all as specified and as directed.
M&L Preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.
M&L Prepration of newly plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.
M&L Preparation of new plastered surfaces of wall and preparing surfaces as directed by applying thin layer of wall care putty of 1 mm thick and finally applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.
M&L Preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paintover a coat of red oxide primer complete all as specified and directed.
S&F GI pipes,15 mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F GI pipes,20 mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity,(cylindrical vertical with closed top) double layered hoisted and fixed in position all as specified in SSR part-I & as directed.
S&F 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified and directed.
M & L for concealed point wiring complete with 1.5 sq mm FRLSH,PVC insulated multi standard copper conductor single core cable 1100 volts grade,drawn into and including non metalic PVC rigid conduit medium grade of size not less than 20mm bore and conduit accessories fixed on wall roof etc, and including provn of FRLSH PVC insulated and unsheathed 1.5 Sqmm multistranded flexible copper conductor cable for earth continuity and connected to common earth dolly and pressed steel terminal boxes made out of 1.6 mm thick MS sheet concealed in wall and laminated sheet cover of 3 mm thick on top for housing the switches socket,outlet etc.,for one light point controled by one one way 5 Amp switch all as specified and directed by Engineer-in-Charge. Note: caused of PVC conduit cutting chases of wall making good disturbed wall surfaces including finishing with CM (1:4) matching with existing shade of the painted surface are deemed to be included in the quoted rate.
All as per Item No.50 above,but one 5 Amp socket complete all as specified and directed.
S&F Switch piano flush button, single pole, one way 5 Amp complete all as specified and directed.
S&F Ceiling rose surface type bakelite three terminal complete all as specified and directed.
S&F Switch socket combination,3 pin,5 Amps complete all as specified and directed.
S&F LED tube light fitting,integrated, complete set 4 ft, 1 x 20/18 watt connector block etc. complete with all accessories internally pre-wired and connecting the same to ceiling rose with using copper conductor flexible twisted three core cable ,and fixing the light fitting to walls / roof complete all as specified and directed
S&F LED building security light fitting 25W made up of pressure die cast housing with toughened glass and high power LED with secondary optics & IP66 protection complete with mounting bracket all as specified and directed.
S&F DB,SPN wall mounting type,240 Volts, 2 Way with 200 Amps rated bus bar, single door suitable for fixing MCB's including connecting etc complete all as specified and directed.
S&F MCB SPN 32 Amps, 230 volts AC and connecting using suitable size of wire all as specified and directed.
Supply and spread river sand in trenches as cable cushioning 8 cm below the cables and 15 cm above the cable all as specified and directed. Note: Punned thickness shall be measured for payment purpose.
Supply and lay burnt bricks sub class 'B' standard size laid across the cable in trenches as protection to the cable complete all as specified and directed.
Supply and laying GI pipe, 40 mm bore (light grade) in trenches/under floors or roads or along the pole incl clamp with suitable nuts & bolts for protection of cables complete all as specified and directed.
Supply,laying and testing of LT XLPE cable, insulated, screened PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of cross sectional area 10 sqmm 2 core laying or passing through pipe/wall/floor/trenches complete all as specified and directed.
M&L Earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe (light grade) for earth lead protection pipe for suitable length and GI pipe 20 mm dia (light grade) for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 (using 20 mm graded stone aggregate) for earth pit and 40 mm thick pre-cast RCC cover by using RCC (1 : 2 : 4) type B1 (using 20 mm graded stone aggregate) with 3 Nos 8 mm dia TMT bars both ways,etc and testing on completion complete all as specified and directed by Engineer-in-Charge.
M/S D R GOPE
PAUL ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .