DAY TO DAY MAINT AND REPAIRS TO SUNKEN FLOORS AND WALL TILILNG CEILING ALMN STEEL JOINERY AND REPLACEMENT OF SANITARY AND PLUMBING FITTINGS SWR PIPES AND ALLIED SERVICES IN MARRIED ACCN OTM ACCM TECH AREA AND NCAT AREA AT VRDE AHMEDNAGAR

Amount

Dismantling floor, hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

M & L for non skid coloured ceramic tiles 300 x300 x 7 mm thick as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M & L coloured glazed ceramic tiles in vertical surfaces 350x250x7mm/ 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces complete all as specified and directed.

M& L for vitrified coloured (Dark shade) ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M& L for vitrified coloured (Dark shade) ceramic tiles 10 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in vertical surfaces such as skirting/dado on wall surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing with water etc of any description.

M & L for rendering 15 mm thick in cement plaster on brick or concrete surfaces of wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 10 mm thick in cement plaster on brick or concrete surfaces of ceiling in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of newly prepared plastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.

M & L for preparation of newly prepared plastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortor including all quoins, arches, pillars etc but excluding ashlar facings and dressed stone work all as specified and directed.

M&L brick work with sub class ‘B’ class straight or curved or plan exc 6 m mean radius built in cm (1:6) all as specified and directed

M&L rendering 15 mm thick in cement (1:4) finished even and smooth without using extra cement on brick or concrete surface all as specified and directed

M & L for preparation of newly prepared surfaces of walls and applying two coats of oil bound distember over a coat of primer complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls and applying one coat of cement based paint complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.00 sqm in each.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm in each.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm in each

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n,exc 2 sqm each

Resecuring or easing & adjusting without taking down shutters of any description n. exc 1 sqm each

S & F for second class hardwood (SAL) plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints

S & F for 35 mm thick factory made second class hard wood glazed and skeleten shutters, open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR part- I, section 8, clause 8.24(a) supplied and fitted to chowkats.

S & F for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples.

S & Fixed in repairs for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples.

S & F 35 mm thick second class hard wood plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats.

S & F for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawings.

S & F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, and fixing in the frame at site as per specification and drawings.

S & F for butt hinges, medium weight, cold rolled of mild steel of size 100 mm.

S & F in repairs for butt hinges, medium weight, cold rolled of mild steel of size 100 mm.

S & F 150 mm long aluminium, anodised barrel tower bolts of extruded section and fixed

S & Fixed in repairs 150 mm long aluminium, anodised barrel tower bolts of extruded section and fixed

S & Fixed in repairs 200 mm long aluminium, anodised barrel tower bolts of extruded section and fixed

S & F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy

S & Fixed in repair for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy

S & F extruded aluminium alloy handles, fabricated type anodised of 150 mm size

S & Fixed in repairs extruded aluminium alloy handles, fabricated type anodised of 150 mm size

S & F for PTMT butt hinges of 100 mm size

S & Fixed in repairs 12 mm thick veneered decorative plywood grade 1 (with BWR resin) with decorative faces veneers on both sides, fixed with screws to timber frame work

S & Fixed in repairs 9 mm thick veneered decorative plywood grade 1 (with BWR resin) with decorative faces veneers on both sides, fixed with screws to timber frame work

S & Fixed in repairs 18/19 mm thick block boards, grade 1 quality exterior grade, decorative type with decorative face veneer on one faces as in sheleves, partitions, shutters fixed with screws to timber frame work including necessary wooden beading

S & Fixed in repairs floor door stopper 140 mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor,

S & Fixed in repairs continuous (piano) hinges, mild steel bright finish or electro galvanised width of flaps (when open) 30 mm

S & Fixed in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of brass, polished.

S & Fixed in repairs Hasp and staple 150 mm size, safety type aluminium, with mild steel hinge pin including bolt to hinge plate and fixed with screws

S & Fixed in repairs door closer, hydraulically regulated, design No 2 universal type, suitable for door shutters 701 to 850 mm width and weight between 36 to 60 kgs and fixed.

S & Fixed in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S & F bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required hooks (stay) heavy for large gates , hook and pintle hinges large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Grade-E-165

Taking up or down 15 mm dia bore steel tubings and connections, including cleaning for refixing or removal to store.

Taking up or down 20 mm dia bore steel tubings and connections, including cleaning for refixing or removal to store.

S & F for 15 mm dia bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc complete fixed to wall and ceiling or laid in floors

Refixing old steel tubing and connections in new or old position (walls, ceilings, floors etc) of 15 mm dia bore

S & F for 20 mm dia bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc complete fixed to wall and ceiling or laid in floors

Refixing old steel tubing and connections in new or old position (walls, ceilings, floors etc) of 20 mm dia bore

S & Fixed in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or labouratory with plugs, washers and wastes, including bedding in cement mortor on to dwarf wall or including fixing cantilever brackets and connecting unions to pipe, over all size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm

S & Fixed in repairs vitreous china wash basin, angle back of size 600 x 480 mm white, excluding taps, waste, chain and plug and porceilin stopper but including brackets.

S & Fixed in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia

S & Fixed in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia

S & Fixed in repairs vitreous china urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe)

S & Fixed in repairs 32 mm bore dia waste coupling of PTMT (half or full threated) Minimum weight 32 mm - 45 gms

S & Fixed in repairs 40 mm bore dia waste coupling of PTMT (half or full threated) Minimum weight 40 mm - 60 gms

S & Fixed in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm long

S & Fixed in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm long

S & Fixed in repairs vitreous china wash down water closet pan complete including fixing (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe)

S & F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Dismantling water tanks exc 250 ltrs and n.exc 500 ltr capacity and removing to store

Dismantling water tanks exc 500 ltrs and n.exc 1000 ltr capacity and removing to store

Dismantling water tanks exc 1000 ltrs and n.exc 2000 ltr capacity and removing to store

S & F rotational moulded polyethelene water storage tanks of capacity 500 ltrs (cylinderical, vertical with closed top) hoisted and fixed in position all as specified in SSR nPart - I

S & F rotational moulded polyethelene water storage tanks of capacity 1000 ltrs (cylinderical, vertical with closed top) hoisted and fixed in position all as specified in SSR nPart - I

S & F rotational moulded polyethelene water storage tanks of capacity 2000 ltrs (cylinderical, vertical with closed top) hoisted and fixed in position all as specified in SSR nPart - I

S & Fixed in repair vitreous china squatting pan 'orrissa pattern' of size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S & Fixed in repairs 10 ltr capacity PVC valveless , syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.

S & Fixed in repairs bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed of 15 mm bore dia

S & Fixed in repairs bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed of 15 mm bore dia

S & Fixed in repairs PVC bib cock 15 mm dia of PTMT white colour screwed down high pressure with crutch or butterfly handle screwed both and iron pipe or for unions and fixed. (Make : Prayag)

S & Fixed in repairs 15 mm dia fancy type pillar taps cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed

S & Fixed in repairs 15 mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed.

S & Fixed in repairs 15 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (15 mm -142 gms) Make : Prayog

S & Fixed in repairs 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (20 mm -210 gms) Make : Prayog

S & Fixed in repairs 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (25 mm -455 gms) Make : Prayag

S & Fixed in repairs shower rose of PTMT any colour for swivel type suitable for 15 mm dia pipe (as per sample approved by Engr-in-Charge. Make : Prayag)

S & Fixed in repair 125 mm size brass chromium plated shower roses with or without swivel joints, any size including fixing to steel pipe or union

S & F in repairs harrision rails, mild steel, chromium plated with fixing brackets, stops, rollers etc

S & Fixed in repairs PVC (SWR) pipes 110 mm dia with single socket joints fixed to wall with stack clamp complete all as specified and directed.

S & Fixed in repairs PVC (SWR) bends any radious of 110 mm dia bore

S & Fixed in repairs PVC (SWR) pipes 75 mm dia with single socket joints fixed to wall with stack clamp complete all as specified and directed.

S & Fixed in repairs PVC (SWR) bends any radious of 75 mm dia bore

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clip and providing and fixing new ones.

S & F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each panes.

S & F 3.00 mm thick figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 sqm in each panes.

S & F powder coated (minimum thickness of powder coating 50 micron)anodised aluminium frames for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc., complete all as specified and directed.

S & F powder coating anodised aluminium door shutters, aluminium section weighing 0.55 kg/mtr including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 02 nos in each door, hinges, anodised aluminium snap beading, screws etc complete all as specified and directed.

S & F powder coating aluminium windows of sliding type with standard aluminium frame section (powder coated) with 4.00 mm thick sheet glass with sun control film to glass shutter out side and aluminium wire mesh inside fixed on 3 track aluminium section with locking arrangement, handles etc all as specified and directed

S & F powder coated (of approved shade) minimum grill of size 5 mm x 7.5 mm bars of opening 10 cm size mesh RG 103 (as per royal grill) with aluminium channel 'F' angle 20 mm x 15 mm aluminium frame work all as specified and directed.

Removing building materials etc., (other than spoil payable under items 03028 to 03031 in section 3 earth work) to a distance of 100 mtr or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination.

Taking down hood cover of existing rolling shutters and greasing to all components of exisring rolling shutters of various sizes :- (a) Re-alignment of guide channels by removing dust etc. (b) Re-alignment of bearings for proper smooth operation. (c) Cleaning resetling of gear box assembly including tightening/fastening nuts, bolts including welding, required nuts and bolts as suspended shaft. (d) Checking tension of spring and re-tensioning of springs for smooth operation (i) Size not exceeding 16 Sqm

(ii) Size exceeding 16 Sqm

S & F in repairs 1.00 mm thick steel rolling shutters without ball bearings as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, errected in position as indicated of gear operated type with chain wheel and hand chain.

S & F ball bearing for rolling shutters

M & L preparation of newly prepared wood and wood based material over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed

M & L preparation of newly prepared steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed

M & L for special treatment of sunken portion of WCs and bath room as per following stages : Stage 1 : Demolition of WC including lime concrete and cement concrete coba etc and preparing the surface of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil, grease etc. Stage 2 : Providing 10 mm thick plaster in CM 1:4 with chemical DR fixit pedicrete URP/SIKA/ plaster seal of STP Ltd or equivalent. Stage 3 : Applying DR Fixit prime seal primer or STP Ltd and allow to dry for 08 hours under touch dry condition. Stage 4 : Applying two coats of water proofing of DR Fixit pedicrete for the sunken portion of toilet/bathroom (The surface after painting on each coat shall be allowed to dry of 06 hours to next coat) all as per manufacturers instruction. Stage 5 : Again rendering 10 mm thick in CM 1:4 mixed with DR Fixit pedicrete URP of plaster seal of STP Ltd. Stage 6 : All CI joints shall be filled with mixture of cement, fine sand and plaster seal of STP Ltd or DR Fixit pedicreteURP. Stage 7 : Making hole in wall and fixing 600 mm long 25 mm dia GI spout for draining the surplus water if any.

Cleaning and removing all scale and dirt etc, from tanks and mouths of circulating pipes of water tanks exceeding 250 ltr and not exceeding 500 ltr capacity.

Cleaning and removing all scale and dirt etc, from tanks and mouths of circulating pipes of water tanks exceeding 500 ltr and not exceeding 1000 ltr capacity.

Cleaning and removing all scale and dirt etc, from tanks and mouths of circulating pipes of water tanks exceeding 1000 ltr and not exceeding 2000 ltr capacity.

S & F steel windows and ventilators, fixed type with glazing bars

Rectifying the defects in plumbing and sanitary fittings such as water taps, stop valves, pillar taps, waste coupling/pipes, float valves, flush tank, WC seat cover, showers, PVC connections etc by removing loose fittings and fixtures and rectifying defects and refixing the same complete all as specified and directed. NOTE :- (a) The unit rate quoted shall be deemed to be included the elements of labour only for rectifying and making the fittings and fixtures functional. If replacement of part/items is required to make the fittings functional, the cost for labour and material for the same will be ensured and paid for as S & F in repairs under relevent items of this schedule hereinafter and in such cases this items will not be measured and paid for. (b) The contractor will deploy minimum one plumber and one helper from 0900 hrs to 1700 hrs. (c) Plumber and helper shall be employed all working days including sundays and holidays they will report to JE (Civil) concern at 0900 hrs at AGE B/R Office. (d) The NIT rate quoted by the contractor shall be inclusive of working & attending the complaints as directed by the JE (Civil) or Engr-in-Charge. (e) The plumber who is on duty must be provided with common mobile cell to facilitate and render good services to the users and the same shall be deemed to be included in the unit rate. (f) Complaints slips to be collected daily from complaint cell/AGE B/R, Arangaon. (g) Contractor shall provided all tools/ladder etc required for attending complaints with proper tool bag. (h) If individual remains absent on site, contractor shall make an alternative arrangements. If contractor fails to make such arrangement, recovery shall be made at Rs.1000 for plumber and for Rs. 750 for helper per day.

(i) Nipple GI 15 mm x 50 mm ISI marked

(ii) Nipple GI 15 mm x150 mm ISI marked

(iii) Nipple GI 20 mm x 50 mm ISI marked

(iv) Nipple GI 20 mm x 150 mm ISI marked

(v) Nipple GI 25 mm x 50 mm ISI marked

(vi) Nipple GI 25 mm x 150 mm ISI marked

(vii) Tee GI equal 15 mm ISI marked

(viii) Tee GI equal 20 mm ISI marked

(ix) Tee GI equal 25 mm ISI marked

(x) Reducing Tee GI 20 x 15 mm ISI marked

(xi) Reducing Tee GI 25 x 15 mm ISI marked

(xii) Reducing Tee GI 25 x 20 mm ISI marked

(xiii) Elbow GI 15 mm ISI marked

(xiv) Elbow GI 20 mm ISI marked

(xv) Elbow GI 25 mm ISI marked

(xvi) Elbow reducing GI 25 x 20 mm ISI marked

(xvii) Elbow reducing GI 20 x 15 mm ISI marked

(xviii) Tank nipple GI 15 mm ISI marked

(xix) Tank nipple GI 20 mm ISI marked

(xx) Tank nipple GI 25 mm ISI marked

(xxi) Socket GI 15 mm ISI marked

(xxi) Socket GI 20 mm ISI marked

(xxii) Socket GI 25 mm ISI marked

Taking down door/window/ventilator/shutter/cupboard and easing and refixing the same in same opening, refixing of hardware items such as aldrop bolt, tower bolt, handles, hasp & staple, butt hinges, spring fingers, hydraulic door closer, piano hinges etc by removing broken screws, nails etc and providing new screws/nails. Repair to kitchen shelves, partition, curtain rods, pelmet boxes, steel windows, handle/stay by screwing/nailing etc, tighting of love members of aluminium door, windows, ventilators including tighting, rubber beading etc. Tightening of ceiling member & sheets loosing/tighting sheets, windows/ventilators etc. NOTE :- (a) The unit rate quoted shall be deemed to be included the elements of labour only for rectifying and making the fittings and fixtures functional. If replacement of part/items is required to make the fittings functional, the cost for labour and material for the same will be ensured and paid for as S & F in repairs under relevent items of this schedule hereinafter and in such cases this items will not be measured and paid for. (b) The contractor will deploy minimum one carpenter and one helper from 0900 hrs to 1700 hrs. (c) Carpenter and helper shall be employed all working days including sundays and holidays they will report to JE (Civil) concern at 0900 hrs at AGE B/R Office. (d) The NIT rate quoted by the contractor shall be inclusive of working & attending the complaints as directed by the JE (Civil) or Engr-in-Charge. (e) The carpenter who is on duty must be provided with common mobile cell to facilitate and render good services to the users and the same shall be deemed to be included in the unit rate. (f) Complaints slips to be collected daily from complaint cell/AGE B/R, Arangaon. (g) Contractor shall provided all tools/ladder etc required for attending complaints with proper tool bag. (h) If individual remains absent on site, contractor shall make an alternative arrangements. If contractor fails to make such arrangement, recovery shall be made at Rs.1000 for carpenter and for Rs. 750 for helper per day.

(i) S & F fixing GI screws 25 mm length

(ii) S & F fixing GI screws 30 mm length

(iii) S & F fixing GI screws 35 mm length

(iv) S & F fixing GI screws 40 mm length

(v) S & F fixing GI screws 50 mm length

(vi) S & F nails in 30 mm length

(vii) S & F nails in 35 mm length

(viii) S & F nails in 40 mm length

(ix) S & F nails in 50 mm length

(x) S & F nails in 75 mm length

(xi) GI screw bolt with one nut in 50 mm length

(xii) GI screw bolt with one nut in 75 mm length

(xiii) PVC curtain brackets suitable for 19/25 mm curtain rod.

(xiv) S & F stainless steel screw in 25 mm in length

(xv) S & F stainless steel screw in 30 mm in length

(xvi) S & F stainless steel screw in 35 mm in length

(xvii) S & F stainless steel screw in 40 mm in length

(xviii) S & F aluminium screw in 20 mm in length

(xix) S & F aluminium screw in 25 mm in length

(xx) S & F aluminium screw in 30 mm in length

Santosh Popatrao Sarode

M/S DESIRES ENGINEERS AND CONTRACTORS