Repair,re-canning,re-weaving and painting polishing of steel items of furniture under GE Satwari

Amount

Note:- Removal of following existing unserviceable steel components of various MES furniture items or similar items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, pinning, screwing nailing,wedging, glueing, providing hinges,applying putty to level the surface, placing every part in-tact and painting the disturbed portion & scratching the entire steel pallets ,filling putty to the bore holes making surface smooth by scratching it with sand emery paper, the steel furniture shall be painted with synthetic enamel paint after properly cleaned and smoothened the surface. All kind of work will be executed where the furniture exist in different user units of GE Satwari including BSO's Furniture Yard, and office hours only as directed by Engineer-in-Charge. Sizes of S&F components will be as per drawing mentioned.

Almirah small steel with shelves :-FD-67(M) & FD-1032

S&F 3-ways locking system complete all as specified/ shown on drg and directed

S&F Brass lock as per existing pattern and shape complete all as specified/ shown on drg and directed.

S&F stainless steel handle as per existing complete all as specified/ shown on drg and directed .

S&F new Legs as per existing complete all as specified/ shown on drg and directed ..

Repair to dented door by removing the door from hinges, making smooth & straight by removing dent and applying putty,replacing defective hinges and refixing door complete all as specified/ shown on drg and directed .

Repair to existing shelf by opening the clips/rivets of shelf, making smooth & straight by removing dent and applying putty,replacing defective clips/rivets and refixing shelf complete all as specified/ shown on drg and directed .

S&F in replacement new shelf with clips/rivets as per existing complete all as specified/ shown on drg and directed.

S&F in replacement new door with hinges as per existing complete all as specified/ shown on drg and directed.

Almirah large steel with shelves :-FD-67(M) & FD-1031

S&F 3-ways locking system complete all as specified/ shown on drg and directed

S&F Brass lock as per existing pattern and shape complete all as specified/ shown on drg and directed.

S&F stainless steel handle as per existing complete all as specified/ shown on drg and directed .

S&F new Legs as per existing complete all as specified/ shown on drg and directed ..

Repair to dented door by removing the door from hinges, making smooth & straight by removing dent and applying putty,replacing defective hinges and refixing door complete all as specified/ shown on drg and directed .

Repair to existing shelf by opening the clips/rivets of shelf, making smooth & straight by removing dent and applying putty,replacing defective clips/rivets and refixing shelf complete all as specified/ shown on drg and directed .

S&F in replacement new shelf with clips/rivets as per existing complete all as specified/ shown on drg and directed.

S&F in replacement new door with hinges as per existing complete all as specified/ shown on drg and directed.

Bed hard FD/E6/MAP/08(R):-

Taking out existing broken plywood from the bed hard by loosening the nut, bolts with washers and S&F new 12 mm thick plywood, BWR grade, fixed to frame of bed with new GI nut, bolts as per existing complete all as specified/ shown on drg and directed.

S&F new stiffener made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F new head & foot rest made out of mild steel pipe duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

Taking out existing broken head board from bed hard and S&F new head board made out of 18 mm thick pre laminated particle board ,exterior grade, both side laminated, shade as approved by GE with 4mm thick teak wood beading in matching shade with new screws as per existing complete all as specified/ shown on drg and directed.

Taking out existing broken foot board from bed hard and S&F new head board made out of 18 mm thick pre laminated particle board ,exterior grade, both side laminated, shade as approved by GE with 4mm thick teak wood beading in matching shade with new screws as per existing complete all as specified/ shown on drg and directed.

S&F hard rubber shoe complete all as specified & shown on drg and directed

Chair writing officer's FD/E6/MAP/12:-

S&F in replacement new seat made out of 12mm thick plywood,BWR grade with 50 mm thick foam cushion of density 50-55 kg/cbm , fixed with PVC lipping all round. The foam cushion and plywood shall also be covered with best quality tapesrty cloth/fabric of rate Rs-500/ mtr minimum as approved irrespective of what is shown in drawing complete all as specified and directed.

S&F in replacement new back made out of 12mm thick plywood,BWR grade with 50 mm thick foam cushion of density 50-55 kg/cbm , fixed with PVC lipping all round. The foam cushion and plywood shall also be covered with best quality tapesrty cloth/fabric of rate Rs-500/ mtr minimum as approved irrespective of what is shown in drawing complete all as specified and directed.

S&F in replacement new arms with polyurethane reinforced with MS insert arms as per existing complete all as specified/ shown on drg and directed.

S&F Rubber stopper as per existing complete all as specified/ shown on drg and directed.

Table office clerk steel FD-1004:-

S&F Top made out of 18 mm thick pre-laminated particle board,exterior grade, one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade as per existing complete all as specified/ shown on drg and directed .

S&F in replacement new legs made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F in replacement lock of drawer as per existing complete all as specified/ shown on drg and directed.

Repair to drawer including tinkering/denting, painting, welding etc to make it functional propery complete all as specified/ shown on drg and directed.

S&F new stiffener made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F Rubber shoe as per existing complete all as specified/ shown on drg and directed.

Table office officer steel FD-1003, HFD-2051:-

S&F Top made out of 18 mm thick pre-laminated particle board,exterior grade, one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade as per existing complete all as specified/ shown on drg and directed .

S&F in replacement new legs made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F in replacement lock of drawer as per existing complete all as specified/ shown on drg and directed.

Repair to drawer including tinkering/denting, painting, welding etc to make it functional propery complete all as specified/ shown on drg and directed.

S&F new stiffener made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F Rubber shoe as per existing complete all as specified/ shown on drg and directed.

Table 900x600x760 mm w/o drawer FD-1007:-

S&F Top made out of 18 mm thick pre-laminated particle board,exterior grade, one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade as per existing complete all as specified/ shown on drg and directed .

S&F in replacement new long & short rails made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F in replacement new legs made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F new stiffener made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F Rubber shoe as per existing complete all as specified/ shown on drg and directed.

Table 900x600x760 mm with drawer FD-83,FD-1008:-

S&F Top made out of 18 mm thick pre-laminated particle board,exterior grade, one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade as per existing complete all as specified/ shown on drg and directed .

S&F in replacement new long & short rails made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F in replacement new legs made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F in replacement lock of drawer as per existing complete all as specified/ shown on drg and directed.

S&F new stiffener made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

Repair to drawer including tinkering/denting, painting, welding etc to make it functional propery complete all as specified/ shown on drg and directed.

S&F Rubber shoe as per existing complete all as specified/ shown on drg and directed.

Ladder Aluminium FD-1025 :-

S&F new aluminium fluted conduit pipe rung as per existing complete all as specified/ shown on drg and directed.

S&F hard rubber shoe as per existing complete all as specified/ shown on drg and directed.

Table bed side FD/E6/MAP/15(R) :-

S&F Top made out of 18 mm thick pre-laminated particle board,exterior grade, as per existing shade duly covered with 4 mm thick teak wood beading in matching shade as per existing complete all as specified/ shown on drg and directed .

S&F side board made out of 18 mm thick pre-laminated particle board,exterior grade, as per existing shade as per existing complete all as specified/ shown on drg and directed .

S&F front side of upper drawer made out of 18mm thick pre-laminated particle board,exterior grade and 12mm thick commercial plywood BWR grade as in drawer as per existing complete all as specified/ shown on drg and directed .

S&F front side of lower drawer made out of 18mm thick pre-laminated particle board,exterior grade and 12mm thick commercial plywood BWR grade as in drawer as per existing complete all as specified/ shown on drg and directed .

S&F stainless steel handle as per existing complete all as specified/ shown on drg and directed .

S&F new legs made out of mild steel square pipe of dia 18mm and 18 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F new stiffener made out of mild steel square pipe of dia 18mm and 18 guage( 2 Nos each) duly welded in between front legs and rear legs of the frame as per existing complete all as specified/ shown on drg and directed.

S&F new telescopic channel for smooth movement of drawer (02 nos in one drawer) as per existing complete all as specified/ shown on drg and directed .

S&F new back side made out of 6mm thick plywood ,BWR grade as per existing complete all as specified/ shown on drg and directed .

S&F hard rubber shoe as per existing complete all as specified/ shown on drg and directed.

Charpoy IP folding Hard top FD-388(R) :-

Taking out existing broken plywood from the charpoy IP by loosening the nut bolts with washers. and S&F new 12 mm thick plywood,BWR grade fixed to charpoy frame with new GI nut, bolts with washers as per existing complete all as specified/ shown on drg and directed .

S&F new stiffener made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F new legs made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F Gusset plate riveted with pipe and legs as per existing complete all as specified/ shown on drg and directed.

S&F hard rubber shoe as per existing complete all as specified/ shown on drg and directed.

Rack Shoe Steel FD/E6/MAP/02(R) :-

S&F new mild steel rod of dia 3mm, welded to frame as per existing complete all as specified/ shown on drg and directed.

Chair Easy Steel FD-121 (M) :

S&F in replacement new seat made out of 12mm thick plywood,BWR grade with 50 mm thick foam cushion of density 32-40 kg/cbm . The foam cushion and plywood shall also be covered with best quality tapesrty cloth/fabric of rate Rs-500/ mtr minimum as approved irrespective of what is shown in drawing complete all as specified and directed.

S&F in replacement new back made out of 12mm thick plywood,BWR grade with 50 mm thick foam cushion of density 32-40 kg/cbm . The foam cushion and plywood shall also be covered with best quality tapesrty cloth/fabric of rate Rs-500/ mtr minimum as approved irrespective of what is shown in drawing complete all as specified and directed.

S&F hard rubber shoe as per existing complete all as specified/ shown on drg and directed.

Desk FD-1021 :-

S&F new desk box made out of wood planks with front side open and top sloping with 4mm thick teak wood beading on front side as per existing complete all as specified/ shown on drg and directed.

S&F PVC hard shoe complete all as specified & shown on drg and directed

Table Centre Two Tire .HFD-2040 :-

S&F 10mm thick bevelled edge clear/coloured glass top ,fitted with PVC vaccume pads for mounting as gripping the glass top as per existing complete all as specified/ shown on drg and directed.

S&F Rubber shoes 35x15mm for CPR.

Screen Movable 3 Fold steel HFD-2015 :-

S&F 50mm castors, swivel type as per existing complete all as specified/ shown on drg and directed.

Arc welding to 3 section at joints as per existing complete all as specified/ shown on drg and directed.

S&F new washable synthetic cloth of light pastle colour with spring as per existing complete all as specified/ shown on drg and directed.

Ladder For Loft FD-238 :-

S&F new mild steel pipe of dia 25mm as in rungs welded to stringers as per existing complete all as specified/ shown on drg and directed..

S&F Hard rubber shoe as per existing complete all as specified/ shown on drg and directed.

Teapoy Verandah FD/E6/MAP/17 :-

S&F new top made out of 18 mm thick prelaminated particle board, one side laminated in light wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive as per existing complete all as specified/ shown on drg and directed.

S&F hard rubber shoe as per existing complete all as specified/ shown on drg and directed.

S&F new long & short rail made out of mild steel square pipe of existing size duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F new 5mm dia mild steel bar base tray 12x10 nos at equal distance as per existing complete all as specified/ shown on drg and directed.

Teapoy Verandah FD-253 :-

S&F new top made out of 18 mm thick prelaminated particle board, one side laminated in light white shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive as per existing complete all as specified/ shown on drg and directed.

S&F hard rubber shoe as per existing complete all as specified/ shown on drg and directed.

S&F new long & short rail made out of mild steel square pipe of existing size duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F new legs made of coduit pipe as per existing complete all as specified/ shown on drg and directed.

S&F new short & long stiffener as per existing complete all as specified/ shown on drg and directed.

Chair verandah FD-255 & 259 :

Spot arc welding to broken parts/joints of chairs.

Removing old unserviceable cane from chair varandah and recanning with new plastic cane 4.00mm wide, in white colour,(mat pattern) complete all as specified and shown on drawing.

Removing the existing unserviceable cane from the chair and S&F new PVC seat and back 4mm thick to the chair after providing one extra support in between seat and back of chair.The support shall be of 5mm dia mild steel flat iron patti welded horizontally to seat and back as per existing complete all as specified/ shown on drg and directed.

Removing the existing unserviceable PVC seat and back from the chai and S&F new PVC seat and back 4mm thick to the chair.after providing one extra support in between seat and back of chair.The support shall be of 5mm dia mild steel flat iron patti welded horizontally to seat and back as per existing complete all as specified/ shown on drg and directed.

M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces of chair including preparation of surfaces by rubbing with sand paper or grinding by hand grinder to make surface even and smooth & apply primer where required complete all as specified and directed.

S&F PVC hard shoe as per existing complete all as specified/ shown on drg and directed.

Chair revolving cushioned with arm all type:-

S&F in replacement of pedestal assembly of chair revolving as per existing complete all as specified/ shown on drg and directed.

S&F in replacement of hydraulic hight adjustment base assembly of chair revolving as per existing complete all as specified/ shown on drg and directed.

S&F in replacement of new arms with polyurethane reinforced with mild steel insert arms as per existing complete all as specified/ shown on drg and directed.

Removing the old torn/damaged tapestry cloth/rexine from the seat of the chair and providing new 75mm thick cushion seat of density 40 kg/cbm, padded back with upholestered rexine/tapestry cloth as per existing complete all as specified/ shown on drg and directed.

Removing the old torn/damaged tapestry cloth/rexine from the back of the chair and providing new 75mm thick cushion back of density 40 kg/cbm, padded back with upholestered rexine/tapestry cloth as per existing complete all as specified/ shown on drg and directed.

Stool steel with back rest type-II HFD-2007 :-

S&F new seat made out of 12mm thick plywood,BWR grade with 50 mm thick foam cushion of density 32 kg/cbm . The foam cushion and plywood shall also be covered with best quality tapesrty cloth/fabric of rate Rs-500/ mtr minimum as approved irrespective of what is shown in drawing complete all as specified and directed.

S&F new back rest made out of 12mm thick plywood,BWR grade with 50 mm thick foam cushion of density 32 kg/cbm . The foam cushion and plywood shall also be covered with best quality tapesrty cloth/fabric of rate Rs-500/ mtr minimum as approved irrespective of what is shown in drawing complete all as specified and directed.

M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces of stool including preparation of surfaces by rubbing with sand paper or grinding by hand grinder to make surface even and smooth & apply primer where required complete all as specified and directed.

S&F PVC hard shoe as per existing complete all as specified/ shown on drg and directed.

Chair CB with arms Steel FD-75 :-

S&F handle made out of teak wood fixed with arms as per existing complete all as specified/ shown on drg and directed.

S&F seat made out of teak wood as per existing complete all as specified/ shown on drg and directed.

S&F back made out of teak wood as per existing complete all as specified/ shown on drg and directed.

Removing old unserviceable cane from chair and recanning with new plastic cane 2.0 to 2.5mm wide,half round, in white colour,(gola pattern) complete all as specified and shown on drawing.

M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces of chair including preparation of surfaces by rubbing with sand paper or grinding by hand grinder to make surface even and smooth & apply primer where required complete all as specified and directed.

Table Steel 900x900x760 mm FD 1009 :-

S&F Top made out of 18 mm thick pre-laminated particle board,exterior grade, one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade as per existing complete all as specified/ shown on drg and directed .

S&F new legs made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F new long & short rails made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F new long & middle stiffener made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F Rubber shoe as per existing complete all as specified/ shown on drg and directed.

Table Dining OR's Steel FD-165 :-

S&F Top made out of18mm thick plywood,BWR grade, commercial duly covered with aluminium sheet 22 gauge as per existing complete all as specified/ shown on drg and directed.

S&F new long & short rails made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F new legs made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F new long & short stiffener made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F Rubber shoe as per existing complete all as specified/ shown on drg and directed.

Locker bed side steel FD-1029 :-

S&F new hasp and staples of size 150mm complete all as specified/ shown on drg and directed.

S&F stainless steel handle as per existing complete all as specified/ shown on drg and directed.

S&F new tubuler pipe 20mm dia, 1.00mm thick as per existing complete all as specified/ shown on drg and directed.

S&F new legs as per existing complete all as specified/ shown on drg and directed.

Repair to dented door by removing the door from hinges, making smooth & straight by removing dent and applying putty,replacing defective hinges and refixing door complete all as specified/ shown on drg and directed .

Repair to existing shelf by opening the clips/rivets of shelf, making smooth & straight by removing dent and applying putty,replacing defective clips/rivets and refixing shelf complete all as specified/ shown on drg and directed .

S&F in replacement new shelf 1.2mm thick with welding as per existing complete all as specified/ shown on drg and directed.

S&F in replacement new door 1.2mm thick with hinges as per existing complete all as specified/ shown on drg and directed.

Charpoy IP Hard Top Steel MAP FD/MAP-II/01 :-

Taking out existing broken plywood from the charpoy IP by loosening the nut bolts with washers. and S&F new 12 mm thick plywood,BWR grade fixed to charpoy frame with new GI nut, bolts with washers as per existing complete all as specified/ shown on drg and directed .

S&F new stiffener made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F new legs made out of mild steel square pipe of dia 25mm and 16 guage, duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F new long & short rail made out of mild steel rectangular pipe of size 65mmx25mm, 16 gauge duly welded properly at joints as per existing complete all as specified/ shown on drg and directed.

S&F hard rubber shoe as per existing complete all as specified/ shown on drg and directed.

Rack Adjustable 3 tier FD-1037 :-

Repair to existing shelf by opening the clips/rivets of shelf, making smooth & straight by removing dent and applying putty,replacing defective clips/rivets and refixing shelf complete all as specified/ shown on drg and directed .

Rack Adjustable 6 tier FD-1038 :-

Repair to existing shelf by opening the clips/rivets of shelf, making smooth & straight by removing dent and applying putty,replacing defective clips/rivets and refixing shelf complete all as specified/ shown on drg and directed .

Auditorium chair TP:-

S&F seat foam cushion of density 32 or 48Kg/cbm as per existing shape and laminated with stretchable fire retardant fabric upholstery with existing shade and colour complete all as specified/ shown on drg and directed.

S&F back foam cushion of density 32 Kg/cbm as per existing shape and laminated with stretchable fire retardant fabric upholstery with existing shade and colour complete all as specified/ shown on drg and directed.

Chair School With Hard Board FD/E6/MAP/05 :-

Removing the existing unserviceable PVC seat & back from the chair and S&F new PVC seat & back 4mm thick, fixed with screws as per existing complete all as specified/ shown on drg and directed.

Dismantling old unserviceable openable table top and S&F new openable table top to slide on rod for adjustment 18mm thick pre-laminated particle board with PVC edging, screwed to 25mm hollow pipe inserted in 20mm rod welded to frame by gas/electric welding complete all as specified and shown on drawing.

Spot arc welding to broken parts/joints of chairs.

S&F hard rubber shoe as per existing complete all as specified/ shown on drg and directed.

Table Computer FD/E6/MAP/03 :-

Removing existing unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak wood of existing size including providing PVC egding beading allround the top complete all as specifed and shown on drawing.

Removing existing unserviceable pull out tray with telescopic channel and S&F new pull out tray made of 18 mm pre-laminated particle board, exterior grade and telescopic channel including providing PVC egding beading allround complete all as specifed and shown on drawing

Removing existing unserviceable drawer with telescopic channel and S&F new drawer made of 18 mm pre-laminated particle board, exterior grade and telescopic channel including providing PVC egding beading allround complete all as specifed and shown on drawing

Removing existing unserviceable key board tray with telescopic channel and S&F new key board tray made of 18 mm pre-laminated particle board, exterior grade and telescopic channel including providing PVC egding beading allround complete all as specifed and shown on drawing.

S&F new verticla side made out of 18mm thick pre- laminated particle board including providing PVC egding beading allround complete all as specifed and shown on drawing.

S&F new bottom shelf made out of 18mm thick pre- laminated particle board including providing PVC egding beading allround complete all as specifed and shown on drawing.

S&F new legs with nylone buffers as per existing complete all as specified/ shown on drg and directed.

Book case steel FD-1028 :-

Removing the existing unserviceable lock and S&F new set (One Set- 4 Nos).of locks operateable with single key as per existing complete all as specified/ shown on drg and directed.

S&F new stainless steel handle as per existing complete all as specified/ shown on drg and directed.

S&F new glass of shutter as per existing complete all as specified/ shown on drg and directed..

S&F new shelves as per existing complete all as specified/ shown on drg and directed.

S&F new sliding shutter as per existing complete all as specified/ shown on drg and directed.

S&F 1.5mm mild steel sheet welded with bottom side as per existing complete all as specified/ shown on drg and directed.

Cabinet Filling 4 Drawer steel FD-397 :-

Removing the existing unserviceable lock and S&F new set (One Set- 4 Nos).of locks operateable with single key as per existing complete all as specified/ shown on drg and directed.

S&F 1.5mm mild steel sheet welded with bottom side as per existing complete all as specified/ shown on drg and directed.

Step Two Tier Steel HFD-2009 :-

S&F new legs & stiffener made out of mild steel tubular pipeas per existing complete all as specified/ shown on drg and directed.

S&F hard rubber shoe as per existing complete all as specified/ shown on drg and directed.

Charpoy GI Pipe FD-220 :

Removing nylon niwar, tightening the frame and reweaving of charpoy Gi pipe with new nylon niwar 50/55mm wide , 1st quality, white colour, weight of niwar shall not be less than 1.50 kg per charpoy, closely woven having minimum 34 bands on long rails and 14 bands on short rails, the ends of nylon niwar shall be stitched with nylon niwar by giving one fold with pipes complete all as specified/shown on drg and directed .

Taking out existing broken plywood from the charpoy GI pipe by loosening the nut bolts, tighten the each part of charpoy and S&F 12mm thick plywood ,BWR grade and 02 Nos flat Iron of size 35mm x 6mm duly painted in black colour of length equal to width of plywood/GI charpoy of appropriate size (as per Drg) to GI pipe frame with new GI Nut & bolts 6mm dia 62 to 65mm long complete all as specified/shown on drg and directed .

Removing old unserviceable three-ways elbow from the GI pipe and S&F new three-ways elbow 32 mm dia (ISI marked) complete all as specified/shown on drg and directed .

Removing old unserviceable GI check nuts from the GI charpoy frame & S&F new GI check nuts 32mm bore/dia & 10 mm wide complete all as specified/shown on drg and directed ..

Removing old broken long rail from charpoy and S&F new long rail of GI pipe 32mm dia, medium grade (ISI marked) duly threaded up to 22 mm on both ends to be fitted to the frame complete all as specified & shown on drg and directed .

Removing old broken short rail from charpoy and replacing with new short rail made out of long rail retrieved from Ser item No 37.05 here-in-before duly threaded at both ends up to 22 mm long at both ends to be fitted to the frame complete all as specified & shown on drg and directed .

Removing old broken legs from charpoy GI and replacing with new legs made out of short rails retrieved from Ser item 37.06 here-in-before, duly threaded at one end to be fitted to the frame. The lower end of the leg shall be provided with 3mm thick MS plate of 40mm dia duly continous welding including provision of FMN set as directed by Engineer-in-charge irrespective of what is shown on drg. .

Taking out existing unserviceable plastic newar from the charpoy GI pipe ,tightening the each part of charpoy and S&F 12mm thick plywood, BWR grade of size 1980 x 900mm, fixed to GI pipe frame with GI Nut, bolts 6mm dia 60 to 65mm long including 02 Nos flat iron of size 40mm x 6mm duly painted in black colour of length equal to width of plywood/GI charpoy and fix it tightly to GI Charpoy with nut & bolt including necessary drilling into GI Pipe. Drilling holes 02 Nos in each long rails,02 nos in each short rails & 01 no on both flat iron at centre complete all as specified & shown on drg and directed

M&L for Spray painting with one coat of synthetic enamel paint to steel surfaces of the following steel furniture articles including preparation of surfaces by rubbing with sand paper or grinding by hand grinder to make surface even and smooth & apply primer where required complete all as specified and directed :-

Almirah large steel with shelves FD 67 (M), 1031.

Almirah small steel with shelves FD-67(M)/1032

Bed Plywood top MAP Steel FD/E6/MAP/08R

Chair writing officer's FD/E6/MAP/12

Table office clerk steel FD-1004

Table office officer's steel FD-1003

Table 900x600x760 mm w/o drawer FD-1007

Table 900x600x760 mm with drawer FD-83/1008

Teapoy Varandah FD-253, FD/E6/MAP/17

Table Steel 900x900x760 mm ,FD 1009

Table Dining OR's Steel FD-165 .

Locker bed side steel FD-1029

Charpoy IP Hard Top Steel MAP FD/MAP-II/01

Rack Adjustable 3 tier FD-1037

Rack Adjustable 6 tier FD-1038

Chair School With Hard Board FD/E6/MAP/05

Table Computer FD/E6/MAP/03

Book case steel FD-1028

Cabinet Filling 4 Drawer steel FD-397

Charpoy IP folding Hard top FD-388(R)

Rack Shoe Steel FD/E6/MAP/02(R)

Chair Easy Steel FD-121 (M)

Desk FD-1021

Ladder For Loft FD-238

Form Without Back FD-77 M

Step Steel 2 tier

Stool Steel 305x305x510 mm FD-81

Table Office Clerk type I HFD-2051 .

Table Office Officer's HFD 2050

Table Tubular Steel 1500x750x750 mm With SS Top

Trestle Store Room Steel FD-86 M, FD-1043

Teapoy Verandah FD/E6/MAP/17

Chair Writing (TP)

Bed Stead Fowler HFD-2002

VEE KAY IND (BID ID -3468819)

M/S NEW SUBBERWAL FURNISHERS (BID ID -3467492)