Electrical Tool Kit

Digital Multimeter with True RMSand indicatedistorted waveform • 6040 counts with Bar Graph display • 600 mV to 600 V DC • ±1.2 % ± 3dgt resolution • 600µA DC to 10 A AC/ DC • resistance measurement upto 60 MΩ • capacitance 40 to 4000µF • frequency up to 10 MHz • duty cycle0.1 - 99.9% (Pulse width/Pulse period) • IEC 61010-1 CAT III

AC/DC Clampmeter • 1000A AC/DC CURRENT CLAMP • 1.5%rdg ± 5dgt resolution current • 600 V AC/DC voltage TRUE RMS • 1.3%rdg±5dgt resolution voltage • φ40 conductor size • frequency 10 KHz auto range • duty cycle0.1 - 99.9% • Non Contact voltage (NCV) • min / max record • auto power save • IEC 61010-1 CAT IV 600 V

High sensitivity, miniature AC/DC clamp meter • 0.1mA minimum resolution for AC current • 1mA minimum resolution for DC current. • Ø7.5mm conductor size • 200mA/2/20A AC • 2/20A DC • ±1%rdg±2dgt accuracy • 3 1/2 digit LCD display with recorder

1kV digital insulation tester • Trac-Loc function • 250V, 500V, 1000V ranges • 200mA continuity range • Live circuit waring • Illuminated scale (bargraph display) • Automatic discharge • Auto null function • Min 1mA on current insulation tests as per IEC 61557

Digital Earth Resistance Tester • measuring range 2Ω to 200kΩ • earth resistivity of 2Ω to 200kΩ • Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value • measurement method Earth resistance: Fall-of-potential method (currents and voltages measured via the Probes) • Measurement method of Earth Resistivity (ρ): Wenner 4-pole method • Series interference voltage (earth voltage) • RMS Rectifier (between the E-S Terminals) • over load protection between E-S(P) and between E-H(C) terminals AC280V / 10 sec

Digital Light Meter • Data hold function • 0.1 - 19990Lux • Angular incident - 30º Less than ±3% 60º Less than ±10% 80º Less than ±30% • response time 2.5times / sec

Phase Indicator • operating voltage 110 - 600V AC 1 • frequency response 50/60Hz • withstand voltage 5550V AC for 1 minute • IEC 61010-1 CAT III 600V

Clamp On Earth Tester • True RMS • The earth resistance from 0.05 to 1500Ω can be measured without the auxiliary earth spikes. • Accurate true RMS readings of AC current including distorted waveform from 1mA to 30.0A • Save and display up to 100 measurement data • Earth resistance Auto range 20.00/200.0/1500Ω • Sample rate Approx. 1 times per second • Current consumption Approx. 50mA (max.100mA) • Conductor size Ø32mm

5 KV INSULATION TESTER • 250V, 500V, 1000V,2500V,5000V ranges • Insulation Resistance up to 10TΩ • Short-Circuit Current up to 5mA • Diagnostic Insulation Tests: IR, PI, DAR, DD, SV, RAMP (Breakdown and Burn modes), Capacitance, Leakage Current • Wireless communication by Bluetooth for transferring and showing real-time data to PC and Android device • ACCURACY 0.1T - 9.99TΩ ,±20%rdg • Capacitance measurement 5.0nF - 50.0µF, 5.0nF - 25.0µF (5000V) • current measurement 0.00nA - 5.50Ma • voltage measurement AC: 30 - 600V (50/60Hz), DC: ±30 - ±600V

SINETEC TECHNOLOGIES