Loading
Loading…
Loading…
Tender Value
₹29.9 L
EMD Value
₹59,823
Closing Date
13 Oct 2026, 6:00 pm
Executive Engineer
Office of Executive Engineer Algarah Engineering Division.
Construction of Road from DO Bunglow Gate to Kewi Bari,Upper Kashyem,Govt.Cinchona Plantation Munsong Kalimpong.
2026_GTA_5075903_1
02/EE/AED/KPG/GTA/2026-27
Open Tender
CIVIL WORKS
Percentage
180 days
Algarah 18th mile
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,500
₹59,823
Yes
Algarah 18th mile
28 Sept 2026
28 Sept 2026
16 Oct 2026
28 Sept 2026
13 Oct 2026
28 Sept 2026
12 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation for road way in soil by mechanical means including cutting and pushing the earth to site of embankment up to a distance of 100 metres (average lead 50 metres), ncluding trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections (Reference to MoRT&H's specification clause 301). | 1,488.3 | Cum | 196.13 | ₹2,91,897.3 |
| 2 | Earth work in excavation of foundation of structures as per drawing and technical specification,including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material (Reference to MORT&H's specification 304). | 121.42 | Cum | 409.12 | ₹49,675.11 |
| 3 | Construction of dry rubble flooring (shall be laid closely on the prepared base in one or more layers with appropriate bond) at cross drainage works for relatively less important works (Reference to MORT&H's specification 2506). | 68.66 | Cum | 3,555.99 | ₹2,44,154.2 |
| 4 | COURSE RUBBLE MASONRY Stone masonry work in cement mortar 1:3 for foundation complete all including curing, sufficiently wetted before its layingetc. Asper drawing andTechnical Specifications (Reference to MORT&H's specifications 1400 & 2200) Random Rubble Masonry (ReferencetoMORT&H'sspecification 1405.1.3). | 40.65 | Cum | 5,881.43 | ₹2,39,080.01 |
| 5 | PLUM CONCRETE (1:3:6) Plain cement concrete of nominal mix (1:3:6 ) with coarse aggregate of which stone boulder of size 225 mm to 150mm of 60% of total dry volume to be placed in position as directed by Eng-in charge ,67% - 40 mm down single &33% - 20 mm down bazri , Coarse Sand ,Cement ( 53 grade ) mechanically mixed in 1:3:6 of rest volume and placed in position and compacted by any means as directed including cost of shuttering . | 16.75 | Cum | 4,177.71 | ₹69,976.64 |
| 6 | Providing weep holes in Brick masonry / Plain / Reinforced concrete abutment, wing wall / return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical specifications. | 15 | Nos | 179.62 | ₹2,694.3 |
| 7 | Back filling behind abutment, wing wall and return all complete including spriklring water and throughly compacted with plate compactor/power rammer in layers not exceeding 150mm compacted thickness as per drawing and Technical Specification (710.1.4 of IRC:78 & MoRTH's specification 2200 | 10.86 | Cum | 2,824.12 | ₹30,669.92 |
| 8 | Plain/Reinforced cement concrete in open foundation complete all including vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200). PCC Grade M15 | 23.02 | Cum | 7,845.54 | ₹1,80,588.57 |
| 9 | Furnishing and Placing Reinforced/Prestressed cement concrete in super structure all including vibrating and compacting, finishing, curing, sampling, testing etc. by mechanically mixed as per clause 1719 of MoRTH but excluding the cost of materials as per drawing and Technical Specification (Reference to MORT&H's specifications 1500, 1600,1700 & 1800) Grade M25 | 95.04 | Cum | 10,834.44 | ₹10,29,705.27 |
| 10 | Supplying, binding, fixing etc. including initial straightening, cutting to requisite length, hooking and bending to correct shape, placing in proper postion of uncoated HYSD reinforcement bar in super-structure complete as per drawing and technical specifications (Reference to MORT&H's specification 1600) . | 0.25 | MT | 64,026.49 | ₹16,262.73 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.64 MB
BOQ_5167787.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .